Originally Posted by Sublvr72 (Post 3889640)

UPDATE-

Well, I have some bad news. the -3 revision is currently only for the 20" wheels in gray and Chrome (when available)

The Black -3 revisions are still in production, no certain ETA yet on when they will be ready to ship.

and the worse news... the 18" rims have NOT been retooled yet. Eagle gave me an 18" rim today to test fit. -2 is the current revision on the 18" and I can confirm that it DOES NOT FIT the larger 1.25" rotor. It will however fit the 1" rotor.

So those of you who ordered 18" rims let me know what you want to do, I can refund your order, or we can upgrade you to 20" wheels.



Now that the bad news is out of the way, the good news is the 20" wheels are shipping this week. I should be getting tracking information from Eagle before the end of the week for all of you guys. Once I receive it I will shoot everyone emails with tracking info.

Originally Posted by k5hart (Post 3891362)

Sublvr72 - Did you get my PM about changing my order? Not trying to be pushy, just want to get the money right with you so hopefully I can get the 20's shipped this week still. Thanks.

Originally Posted by heymoe (Post 3891802)

Sublvr72,
I guess I am going to hold off for now. I just seen the post.... I will think about the 20's
If you can PM me to let me know you got this.
Thanks

Originally Posted by smith2481 (Post 3892451)

So let me get this straight I ordered the 18's and they will not fit? I seen a cat on here that grinded a little bit around his hub and they ended up fitting I think this was for 20's would this be the same case for the 18's let me know something that way I can either change to 20's or cancel my order thanks

Originally Posted by Leviticus (Post 3877769)

Ok, guys,

A little redneck machining aka a grinder and they slid right on!! Looks like the fronts are solved, now onto the rears.

Before and after, you only have to take a little off, not much.

Havent tried the new revised center cap yet but will let you know in a few.

http://i38.photobucket.com/albums/e1...g/DSC04014.jpg

http://i38.photobucket.com/albums/e1...g/DSC04015.jpg

Originally Posted by 6D8_C10 (Post 3892569)

Leviticus, is that with 1 1/2 rotor with 2 7/8 diameter?
What version is that? -2AA
What wheel is it for the 18s or the 20s?
If it is 20, will it be same mod for 18s?

Originally Posted by smith2481 (Post 3892577)

that is what I am asking if that is all I have to do with the 18s I dont mind that a bit I am all for getting them if not too much work

Originally Posted by brossow (Post 3892600)

As I said in response to your PM, the 18s will require significant machine work on the hubs to make them fit as documented in the other thread. Leviticus just hit his with a grinder to knock down a bit on the edge. For some reason his hubs were apparently a lot thicker than mine, specs for which are posted elsewhere in this thread.

Originally Posted by Boise69 (Post 3892646)

Brossow... just send me the wheels i ordered, i wont wait.

Originally Posted by bigarmzz (Post 3892658)

sorry for sounding ignorant here, but just wanted to make sure:

the grey 20's, in a 8.5 front and 10 rear, are ready to ship? or are they back ordered?

Originally Posted by bigarmzz (Post 3892658)

the 18 x 8's are in stock, right and ready to ship?

i have 1" rotors, so i shouldnt have a problem w/hub issues, i dont think either way, just trying to decide between the 18's and the 20's....cant seem to make up my mind....if i know one is in stock and ready to go, and one isnt, that would help me decide

thank you

Originally Posted by darthwall (Post 3893030)

don't the -2 18's have a different center cap than the -3 version I thought I saw this in one of the posts

Originally Posted by TyKby2 (Post 3893814)

I have the 1.25" rotors, but since I plan on lowering my truck I'll just switch to the 1" rotors, so the -2's should be fine.

Originally Posted by darthwall (Post 3893911)

take into consideration that you have to run different calipers with the 1" rotors as well

Originally Posted by tek970chevy (Post 3893964)

do i just order through the website?

Originally Posted by k5hart (Post 3894444)

Sublvr - Any update on changing my order??

Originally Posted by Boise69 (Post 3894804)

Does this mean though i'll never be able to go with 12-13" rotors and wildwood brakes?

Originally Posted by adpostel (Post 3895192)

OK, I'm done, staggered set of 20X10's and 18X8's in Black. My buddy says he will take the fronts to work and machine them for me to the correct size. I guess I'll pull of my rotor to make sure they fit. I'm pretty pumped.

Originally Posted by brossow (Post 3895199)

You did note that black is backordered and not shipping yet, right?

Originally Posted by Sublvr72 (Post 3895264)

the -3 is backordered, the -2 is in stock from what I understand

Originally Posted by Sublvr72 (Post 3895408)

I just took the wheels down from the site. If there are more interested just let me know and if we can get another round going we will.

I have a meeting with eagle tomorrow to finalize some orders and I'll update you shortly.