The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   OR Making room for new project - Parts for sale (https://67-72chevytrucks.com/vboard/showthread.php?t=443700)

Mt Man Chad 01-31-2011 06:39 PM

Re: Making room for new project - Parts for sale
 
Guys bare with me...
Buried in work and on phone with boss most of the day!

Sharpie and all others will take pics of items interested in and post later today.
As well detail pics of items requested.

CC69Rat 01-31-2011 06:51 PM

Re: Making room for new project - Parts for sale
 
Mt Man -- I completely understand. I'd like to see a couple pics of the front of the 68 GM fender when you can. No hurry. I'm not worried about runs in the paint. I'll be media blasting it anyway.

CC69Rat 01-31-2011 11:03 PM

Re: Making room for new project - Parts for sale
 
Guys - I have found another 68 GM fender. I'm leaning toward buying it instead. I'm going to step out and whoever was next can take this one. Take it easy.

hoss67 02-01-2011 07:30 AM

Re: Making room for new project - Parts for sale
 
I think I was next in line. Shipping to 39218. Thanks

72shortstep 02-01-2011 08:14 AM

Re: Making room for new project - Parts for sale
 
Ill take that I6 power steering bracket if it gets to me. Just PM me a total to 29461 if i get it, really need one of these.

Mt Man Chad 02-01-2011 10:49 AM

Re: Making room for new project - Parts for sale
 
Quote:

Originally Posted by jorgensensc (Post 4449717)
Can you do me a crazy favor? I have that exact same radio, but I'm missing the harness. Will you give me a pic of the harness and pinout for where the wires go on the connector? Mine came with the truck? But the radio gives no indication of the wire pinout. Thanks alot! It will really help me out!
Shawn
Posted via Mobile Device

I'm taking pics of the custom camper emblums and step side beds and 68 fender will post.

Sharpie & Jorgensensc - wire info for aftermarket radio you requested.
Yes it has it's own harness, I'll take some pics, you can run it into the fuse block without hacking stock wiring.

Battery ORANGE (+) RADIO HARNESS
Accesory YELLOW (+) RADIO HARNESS
Ground BLACK (-) RADIO HARNESS
Illumination GRAY (+) RADIO HARNESS
Dimmer BROWN (+) RADIO HARNESS
Power Antenna PINK (+) RADIO HARNESS
LF Speaker (+) TAN
LF Speaker (-) GRAY
RF Speaker (+) LIGHT GREEN
RF Speaker (-) DARK GREEN
LR Speaker (+) BROWN
LR Speaker (-) YELLOW
RR Speaker (+) DARK BLUE
RR Speaker (-) LIGHT BLUE
Steering Cntrls NO
Speed Cntrl NO
Radio Security NO

sharpie1972 02-01-2011 10:52 AM

Re: Making room for new project - Parts for sale
 
Hi Chad, So it comes with a harness? That works for me. Let's get the radio, speaker, and radio delete (if it has clips) on the way if that works for you. We can deal with the rest when you have more time. I can Paypal when you are ready. Thanks again, Sharpie

jorgensensc 02-01-2011 11:09 AM

Re: Making room for new project - Parts for sale
 
Hey Chad,
Thanks for doing that for me. Is there any chance I can get a pic of the harness so I can see where the wires go in the plug? All I have is a bunch of metal prongs sticking out of the back of the radio since the harness, (which I'm missing) has the plug on it. Who is the manufacturer? Maybe I can get a harness from them. Thanks a million!
Shawn
Posted via Mobile Device

Mt Man Chad 02-01-2011 12:39 PM

Re: Making room for new project - Parts for sale
 
5 Attachment(s)
I'll take pics now of harness and schematic let me locate it, or I'll locate one online.
Sharpie - pics of Custom camper script and radio delete does have clips.

Going to take pics of Step side wheel wells now and tailgates now that the sun is out. Is this really winter in the northwest? January was like spring!

Mt Man Chad 02-01-2011 01:08 PM

Re: Making room for new project - Parts for sale
 
4 Attachment(s)
More pics of step side wheel wells one small dent on drivers side arch will post and small dent on top. All scuffs in black paint are just surface scratches in black paint maybe 2 small dents on each fender. Working on shipping quotes thru grey hound for those who requested.

Mt Man Chad 02-01-2011 01:27 PM

Re: Making room for new project - Parts for sale
 
3 Attachment(s)
More pics

STP67-72 02-01-2011 02:11 PM

Re: Making room for new project - Parts for sale
 
I think im 1st on rear fenders. I need $ shipped to 77651 texas area.

Mt Man Chad 02-01-2011 02:38 PM

Re: Making room for new project - Parts for sale
 
STP67-72 Working on it right now thru Grey hound

Mt Man Chad 02-01-2011 02:44 PM

Re: Making room for new project - Parts for sale
 
4 Attachment(s)
GMC core support passenger side bottom requested pics. No pin holes or thin spots, just surface rust one more than the other.

rou 02-01-2011 04:12 PM

Re: Making room for new project - Parts for sale
 
I'll get in line for the 68-72 Dash center section if Fesser does not take it.

72BlckButy 02-01-2011 04:15 PM

Re: Making room for new project - Parts for sale
 
Mt Man Chad... I wanted to let you know that I'm still interested in the I6 bracket; just need to see a pic of it to make sure it's related what I need.

Mt Man Chad 02-01-2011 06:04 PM

Re: Making room for new project - Parts for sale
 
1 Attachment(s)
ROU - I'll contact fesser about dash center and keep you posted if he passes.
72blackbuty - I'll take another pic and one as install on my I6 250.

Sharpie & jorgensensc heres the wiring diagram you requested.
If you need more info or the original PDF file send me a PM.

Heavy Evy 02-01-2011 06:44 PM

Re: Making room for new project - Parts for sale
 
any chance theres a pic of the hubcaps?

Mt Man Chad 02-01-2011 07:00 PM

Re: Making room for new project - Parts for sale
 
2 Attachment(s)
Heavy Evy - I'll take pics of the caps and post shortly.
72Blkbuty - Pics of inline 6 Power steering pump "bottom bracket" hard to see in as installed photos but you can at least see complete assembly in following link thanks to Frank!

http://67-72chevytrucks.com/vboard/s...d.php?t=443241

STP67-72 02-01-2011 11:36 PM

Re: Making room for new project - Parts for sale
 
no hurry.

lytemup454 02-01-2011 11:59 PM

Re: Making room for new project - Parts for sale
 
do you have pics of the chevy tailgate?

tow guys 02-02-2011 12:04 AM

Re: Making room for new project - Parts for sale
 
I'm interested in the passenger fender and the gmc rad support if it gets to me. Shipped to 08721.
thanks,
Tony
Posted via Mobile Device
Posted via Mobile Device

sharpie1972 02-02-2011 12:39 AM

Re: Making room for new project - Parts for sale
 
Hi Chad, Custom Campers look good. Let's add those to the pile. Thanks, Sharpie

Mt Man Chad 02-02-2011 01:09 AM

Re: Making room for new project - Parts for sale
 
2 Attachment(s)
STILL PULLING PARTS........ And will post more pics!

Looking For - 1968 TH350 trans and divorced NP205 transfer case.
Send me a PM if you have one or a lead.

jorgensensc - Pics for radio plug requested.


Thanks in advance!
Chad

hot trux 02-02-2011 07:43 PM

Re: Making room for new project - Parts for sale
 
inline also for steps.how much to 63361


All times are GMT -4. The time now is 01:29 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com