Re: My Coy's came today!
 

Grinding the rotor will fix your problem, the weird thing is I have one set that needed the rotor ground and the other did not, I bought both sets used. The burb's just bolted on.

Re: My Coy's came today!
 

Do you have an early rear housing under it? If you measure from backing plate to backing plate, how wide is it? 55.5" or 57" ?

Re: My Coy's came today!
 

FYI, I'm not sure if this problem has been fixed or not? I have made spacers and custom centercaps to clear the dust cover on the front for these wheels.
I don't have any at the time but may be something I will consider making again in the future.

SPACERS
CAPS

Re: My Coy's came today!
 

I'm fairly certain it's the wider rear axle but I never actually measured it. Another clue is I don't think the wheels would tuck aired out (bags someday) if they stuck out another 3/4"

Re: My Coy's came today!
 

stomper, sorry it took so long to get back to you.

those were the problems I was thinking of. They said they were fixed. I guess not.

I went with the Boss 383's wheels. No problems after they grinded the front hub just a little and 1/2" spacers on back for wheel well clearance..

http://216.77.188.54/coDataImages/p/...illeaks025.jpg

I also put 1/2" spacers on back and bought 10 new lug nuts for it that had a deeped shank.
;):chevy:

http://216.77.188.54/coDataImages/p/...illeaks030.jpg

http://216.77.188.54/coDataImages/p/...illeaks012.jpg

Re: My Coy's came today!
 

UPDATE:

FRONT: Ground the edge of the rotor/hub. No problem.
Before
Attachment 906920Attachment 906921

After
Attachment 906922

REAR: I actually have a little more than an inch inside. ............and also here's where the outside of the lip lands inside the wheel well.
Attachment 906923Attachment 906924

Re: My Coy's came today!
 

Here are my pictures hub grinded with tires mounted in above pictures above.
My back only rubbed when I would hit holes in the road.


Hub grinded and painted.
http://67-72chevytrucks.com/gallery/...0/IMG_1216.JPG

Before spacer.
http://67-72chevytrucks.com/gallery/..._leaks_060.jpg

After.
http://67-72chevytrucks.com/gallery/..._leaks_063.jpg

Re: My Coy's came today!
 

Just made my weekend deadline!
Before and After
Attachment 909079Attachment 909080

Attachment 909085Attachment 909086

The rear tire bulge is only about 1/2" so the clearance concern I had on the inside rear is fine. The taller rear tires gave it more rake than I care for. I'm going to install 1-1/2" blocks to make it more to my liking. Will still be able to run the 15" rallys. Then I'll probably need bags to bump it back up when I have the rallys on. 255/40 front and 295/40 rear.

My favorite shot
Attachment 909092

Re: My Coy's came today!
 

Looks sweet!;):chevy:

Re: My Coy's came today!
 

Look great love my coy's
Posted via Mobile Device

Re: My Coy's came today!
 

They look killer! I just ordered the same size wheels with toyo tires for my project... How does it drive with your new tires?

Re: My Coy's came today!
 

How does it ride.

Re: My Coy's came today!
 

Looks really nice man! Great job. I haven't decided 100% but this same wheel is at the top of the list for my GMC.

Re: My Coy's came today!
 

Nice work modifying the rotors. They new wheels look great. Can't wait till I get mine.....one of these days.

Re: My Coy's came today!
 

Looks Killer... I saw 67Anthony"s truck at the super chevy show in Memphis I was highly impressed Sir thats one good looking truck hope to see it again at showfest in tunica.

Re: My Coy's came today!
 

Don't really know yet. Funny thing happend...

Scroll down to post #23

http://67-72chevytrucks.com/vboard/s...d.php?t=491652

Re: My Coy's came today!
 

If you are asking because you might think it would be hard it rides fine. I'm 45 this year and over loud pipes and stuff like that. I wouldn't sacrifice alot of comfort. It really hugs corners with the stock sway bar and ride quality isn't notably compromised with the thin sidewall. I love it. Now rear blocks...
Posted via Mobile Device

Re: My Coy's came today!
 

got the cad file to have 1/4" thick spacers made so you dont have to grind the hubs. free to anyone who wants a copy. email me at
fatboys6969@gmail.com and I will send it to you. I used 1/4" aluminum on mine.
works great !!!

Re: My Coy's came today!
 

Now with 1-1/2" lowering blocks so I guess it's a 4/7.5 drop.

Re: My Coy's came today!
 

Looks great!^^^

Re: My Coy's came today!
 

Nice!!

Re: My Coy's came today!
 

Looks really nice!

Re: My Coy's came today!
 

Nice !
Posted via Mobile Device

Re: My Coy's came today!
 

Yes! looks perfect. I know each truck is different but I bet mine will need blocks too. Glad to here the ride is good with those tires/wheels. I can't wait to get mine going.

What's next for your truck?

Re: My Coy's came today!
 

The stance and wheels look great!