The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 2 of 7 1 2 34567
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   CO 1970 c/20 (https://67-72chevytrucks.com/vboard/showthread.php?t=712028)

haskell 07-13-2016 03:46 PM
Re: 1970 c/20
 
Is the ds vent wing available? That and heater/fan control if all there. Shipped to 46240

72peace 07-13-2016 03:53 PM
Re: 1970 c/20
 
Does it have a rear bumper, looking for a fleetside dealer stamped step bumper?

Cheers,
Nathan

bhahn70 07-13-2016 03:59 PM
Re: 1970 c/20
 
Quote:
Originally Posted by 72peace (Post 7652115)
Does it have a rear bumper, looking for a fleetside dealer stamped step bumper?

Cheers,
Nathan
No sorry

bhahn70 07-13-2016 04:00 PM
Re: 1970 c/20
 
Quote:
Originally Posted by haskell (Post 7652106)
Is the ds vent wing available? That and heater/fan control if all there. Shipped to 46240
Yes driver side vent is available let me see on heater controls. I'll get back to you shortly.

dakattack7 07-13-2016 05:21 PM
Re: 1970 c/20
 
Rear upper outer tailgate trim pieces?

bhahn70 07-13-2016 05:47 PM
Re: 1970 c/20
 
1 Attachment(s)
Quote:
Originally Posted by dakattack7 (Post 7652192)
Rear upper outer tailgate trim pieces?
Not much back there. I'm out of town and not sure of the condition. Are you talking about the tailgate strip that runs in line with the tailgate handle.

dakattack7 07-13-2016 06:38 PM
Re: 1970 c/20
 
Yes, I'll take that right piece that's left for a reasonable price

bhahn70 07-13-2016 07:32 PM
Re: 1970 c/20
 
Quote:
Originally Posted by dakattack7 (Post 7652273)
Yes, I'll take that right piece that's left for a reasonable price
You can have it for whatever shipping and paypal fees are won't know till thur. Or fri. But probably 15.00 how's that for reasonable :)

bhahn70 07-13-2016 10:28 PM
Re: 1970 c/20
 
1 Attachment(s)
Quote:
Originally Posted by bhahn70 (Post 7652125)
Yes driver side vent is available let me see on heater controls. I'll get back to you shortly.
My son checked and they move smoothly but have had screws put in them like most. So not sure if you would want them. But if you did 10.00 plus shipping and paypal fees.

bhahn70 07-13-2016 10:29 PM
Re: 1970 c/20
 
Quote:
Originally Posted by bhahn70 (Post 7652549)
My son checked and they move smoothly but have had screws put in them like most. So not sure if you would want them. But if you did 10.00 plus shipping and paypal fees.
I'll have him shoot a pic of the vent sorry been busy day.

bhahn70 07-14-2016 12:11 AM
Re: 1970 c/20
 
Quote:
Originally Posted by 72peace (Post 7652115)
Does it have a rear bumper, looking for a fleetside dealer stamped step bumper?

Cheers,
Nathan
Do you care what's stamped on it . I do believe I have one it's in storage though. I can't get to it for a bit.

GR8-68 07-14-2016 06:16 AM
Re: 1970 c/20
 
I will take the radio repair panel whenever you can get it cutout, no rush here. will you cut it in the guage hole and the glove box hole and at the back of the dash pad ? that way most of my seams will be blind. Let me know total with shipping

bhahn70 07-14-2016 09:28 AM
Re: 1970 c/20
 
Quote:
Originally Posted by GR8-68 (Post 7652760)
I will take the radio repair panel whenever you can get it cutout, no rush here. will you cut it in the guage hole and the glove box hole and at the back of the dash pad ? that way most of my seams will be blind. Let me know total with shipping
I'll cut it wherever you want it cut just not the whole dash. I will be back tomorrow and I will get pics then. Do you care what truck it comes out of the blue or the orange I believe both have 2 little holes where a cb clip was mounted. Thanx

GR8-68 07-14-2016 09:35 AM
Re: 1970 c/20
 
Either is fine as long as it is straight, I can weld up the cb holes no problem

doo142 07-14-2016 09:35 AM
Re: 1970 c/20
 
If air cleaner is not pitted bad I would do $45 shipped if you can do that??

bhahn70 07-14-2016 10:02 AM
Re: 1970 c/20
 
Quote:
Originally Posted by doo142 (Post 7652871)
If air cleaner is not pitted bad I would do $45 shipped if you can do that??
Sorry I can't

doo142 07-14-2016 01:17 PM
Re: 1970 c/20
 
No problem, thanks

chevycc1970 07-14-2016 02:49 PM
Re: 1970 c/20
 
How much for the low and high horns if still available.

BIG ORANGE 07-14-2016 03:32 PM
Re: 1970 c/20
 
Thanks Brian fr the PS unit, it was just as you described,
Guy's dont hesitate doing buiness with Brian he is 1st class and fast on shipping!
I give him thumbs up!!!

bhahn70 07-14-2016 03:47 PM
Re: 1970 c/20
 
Quote:
Originally Posted by BIG ORANGE (Post 7653173)
Thanks Brian fr the PS unit, it was just as you described,
Guy's dont hesitate doing buiness with Brian he is 1st class and fast on shipping!
I give him thumbs up!!!
Glad you like your parts. Thanx for the feedback

bhahn70 07-14-2016 03:52 PM
Re: 1970 c/20
 
Quote:
Originally Posted by chevycc1970 (Post 7653139)
How much for the low and high horns if still available.
My 20 month old did try the horn out :) but I'm not sure if they both worked but for sure at least one made a sound. I will try them on my truck one at a time since I don't have high low setup. I'll let you know if they work and price to follow depending on operation.

chevycc1970 07-14-2016 03:57 PM
Re: 1970 c/20
 
Quote:
Originally Posted by bhahn70 (Post 7653186)
My 20 month old did try the horn out :) but I'm not sure if they both worked but for sure at least one made a sound. I will try them on my truck one at a time since I don't have high low setup. I'll let you know if they work and price to follow depending on operation.
Sounds good. I will be patiently watching. Thanks

bhahn70 07-14-2016 10:16 PM
Re: 1970 c/20
 
Quote:
Originally Posted by Cheyennekid (Post 7650211)
Ok will do can u send me your info i will send u the money order first thing thursday morning
Never heard back I pulled the brackets and boxed them up. Did you send out the money order? Please let me know. Thanx

ck5566 07-14-2016 11:47 PM
Re: 1970 c/20
 
Quote:
Originally Posted by bhahn70 (Post 7653589)
Never heard back I pulled the brackets and boxed them up. Did you send out the money order? Please let me know. Thanx
If the "Kid" doesn't want them or his time runs out, I'll take them. **shipping to 92284**. I am almost moved so 92270 wont be good anymore. thanks

bhahn70 07-15-2016 12:37 AM
Re: 1970 c/20
 
Quote:
Originally Posted by ck5566 (Post 7653657)
If the "Kid" doesn't want them or his time runs out, I'll take them. **shipping to 92284**. I am almost moved so 92270 wont be good anymore. thanks
This is new to me so how long am I supposed to wait to be paid. I don't wanna make anyone mad. I will wait till Monday. that fair? if I haven't heard back you can have them for the same price.


All times are GMT -4. The time now is 12:22 AM.
Page 2 of 7 1 2 34567
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com