The 1947 - Present Chevrolet & GMC Truck Message Board Network - Convert C20 to C10..... suspension, ride height

Page 2 of 2

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Convert C20 to C10..... suspension, ride height (https://67-72chevytrucks.com/vboard/showthread.php?t=777394)

sphughes1

03-30-2020 10:02 AM

Re: Convert C20 to C10..... suspension, ride height

Quote:

Originally Posted by PepperTreeGarage (Post 8408023)

Yes, did 2.5 in. Drop Spindles and 3 in. Drop Springs from POL. Also added the Lowered Brackets for the Sway Bar and Front Shock top mount Reinforcement Bracket. The front shocks are also shorter.

What kind of rotors are you running?
Also how does sway bar attach I have 68 GMC with leaf was wondering about rear sway bar

64longbedcustom

05-10-2020 08:29 PM

Re: Convert C20 to C10..... suspension, ride height

Quote:

Originally Posted by The Autoist (Post 8407820)

That is something to consider, 5 lug would work fine too. I can always get 5 lug rallies, I just already have 6 lugs. Thanks for your post, it all helps me figure out what I want to do, Thanks

Did you ever decide on what you were going to do.
I am in the same boat and can't make up my mind. I just don't like the looks of the 8 lug wheels.

Wondering if I should throw a different axle under the rear and change front to C10.

PepperTreeGarage

05-11-2020 07:35 PM

Re: Convert C20 to C10..... suspension, ride height

5 Attachment(s)

Quote:

Originally Posted by sphughes1 (Post 8704871)

What kind of rotors are you running?
Also how does sway bar attach I have 68 GMC with leaf was wondering about rear sway bar

Rotors are Stop Tech. Rear sway bar is an old Hellwig 7402 that the pervious owner had installed. We modified and refurbished it to work with the FlipKit.

All times are GMT -4. The time now is 01:32 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page