Re: 1972 C10 Parting
 

The other panels are on another truck and need to be pulled, cleaned and inspected before I can price them. I can get you a quote for everything at once or do the panels separate. The panels are going to take some time to pull and get cleaned.

Thank you,
Thomas

Re: 1972 C10 Parting
 

Here are photos of the wiper arms and the best set of lenses I have currently. These lenses are $15.00 each and are nice for a driver, no cracks and decent color.

Let me know and I will get you a shipping quote with your zip code.

Thank you,
Thomas

Re: 1972 C10 Parting
 

The other fan shroud in the photo is not for sale. It just happened to be in the pic and is not for a small block truck. I may have another one for a small block no air if you need two. I will get you a shipping quote for the one.

Let me know and thank you,
Thomas

Re: 1972 C10 Parting
 

yes that is correct, i'm in for the air cleaner $35, spacer $22.50, equally nice set of window cranks $7.50 ea and the bow tie for $30. on the trim is that the upper belt trim and is it a complete set? if it is complete let me know what you want for it, if it is not then i'll pass on it.

thanks
keith

Re: 1972 C10 Parting
 

Hi Keith,

The trim on this thread is cab forward and upper belt trim. I do have the box side trim from another truck that is for a 127 inch wheel base bed. I would sell the two bed pieces (left and right) for $30.00 each so the complete set of upper belt trim is $150.00 plus the shipping. This would ship in a tube to prevent damage.

I will get you a quote on everything else other than the trim.

Thank you,
Thomas

Re: 1972 C10 Parting
 

Would you do 85 shipped on the washer bottle and bracket if you have a cap, plus the pair of door handles? Either way pm me your paypal and I'll take the radio wire for 10 shipped. Thanks

Re: 1972 C10 Parting
 

PM on the way.

Thank you,
Thomas

Re: 1972 C10 Parting
 

No problem, I was thinking I should make a list as well. Will put it together when I get home from work.

I was thinking with the big stuff freight would be better as well. I can have it sent here to my work address.

Re: 1972 C10 Parting
 

Sounds good. That will make sure we are on the same page. Also, get me a zip code for the business/work address.

Thank you,
Thomas

Re: 1972 C10 Parting
 

The bow tie is pending. I can send the inner door handles and window cranks for $7.00 shipping so $37.00 total. Let me know and I will send you payment information on a PM.

Thank you,
Thomas

Re: 1972 C10 Parting
 

ok I think i'll pass on the belt trim for now but thanks.
but let me know the shipping and payment method on the rest of the stuff.........

Re: 1972 C10 Parting
 

PM on the way with total and payment information.

Thank you,
Thomas

Re: 1972 C10 Parting
 

I'll pass on the wiper arms but I will take those other lenses for sure! What do the housings look like? Shipping will be to 20871. Thank you!

Re: 1972 C10 Parting
 

Chevy's rule

Re: 1972 C10 Parting
 

For the visors and heat stove, the total with shipping will be $95.00.

Let me know and I will send you a PM with payment information.

Thank you very much,
Thomas

Re: 1972 C10 Parting
 

I second that ;)

Re: 1972 C10 Parting
 

I can set you up with a nice decent set of usable housings with no stripped out holes and good pig tails at $12.50 each. You want the good $15.00 each lenses, correct? I can ship all for $13.00 so your total will be $68.00.

Let me know and I can PM you payment information.

Thank you,
Thomas

Re: 1972 C10 Parting
 

The fan shroud will be $45.00 plus $25.50 shipping to your zip code for a total of $70.50.

I do have another small block no air shroud in the same nice condition.

Let me know and I can send you a PM with payment information.

Thank you,
Thomas

Re: 1972 C10 Parting
 

$40 for the parts and $33.00 for shipping so $73.00 total.

I pack the trim very well to prevent damage in shipping. It will be two packages.

Let me know and I will send PM with payment information.

Thank you,
Thomas

Re: 1972 C10 Parting
 

brake/clutch pedal assembly...$ 45.00
2wd 4 speed (SM465) floor hump...$ 35.00
4 speed (SM465) shift handle with boot and ring and handle, very minor tear in boot, under fold...$ 40.00
complete clutch pedal linkage from clutch pedal to throw out fork, including the frame bracket and return spring...$65.00
clutch/brake pedal stop bracket...$ 10.00
steering column, black for 4 speed, decent driver condition...$85.00
Complete drive line with center bearing bracket for 127 inch wheel base, small block with SM465 trans. Comes with bracket for cross member...$ 75.00
1 small block 4 speed transmission cross members nice and clean...$ 65.00

Zip for business address is 34677

Re: 1972 C10 Parting
 

Ok, I will work on shipping quote. May be Monday before I can get it worked up. 34677 to a business, correct?

I will check freight with a pallet and UPS with multiple packages and see which is more economical for you.

I will get back with you soon,.

Thank you,
Thomas

Re: 1972 C10 Parting
 

Ok I will wait to see if bowtie gets taken but sounds good on the handles.

Re: 1972 C10 Parting
 

OK, I did some work here and got you a shipping quote for both UPS and freight.

I can do everything UPS in multiple packages for packages for $135.00. Freight came out to be $235.00.

The parts total came to $410 but we can give you everything for $400.00 even. The grand total with shipping is $535.00 UPS or add $100.00 if you wanted it freight shipped.

I can get this ready to go on Monday for you., Send me a PM and I will give you payment information if interested.

Thank you,
Thomas

Re: 1972 C10 Parting
 

Good used is better than cheap repro, right? lol

I'll take the parts. Send me a PM w/ info for mailing a Postal MO.

Re: 1972 C10 Parting
 

Do you still have all the parts for the IFS?

Re: 1972 C10 Parting
 

PM on the way.

Thank you,
Thomas

Re: 1972 C10 Parting
 

"
Complete disc brake conversion, includes, cross member, coils, upper and lower control arms, spindles, rotors with bearings, dust shields, calipers, idler arm, inner and outer tie rods. Center link not in the photo but will make one available with the sale...$ 250.00"

Yes this is still available.

Thank you,
Thomas

Re: 1972 C10 Parting
 

payment sent by paypal for the air cleaner, spacer,bow tie and cranks

still got this trim on my mind, but isn't 127" for a long bed? I have a short bed

Re: 1972 C10 Parting
 

Sorry to keep bothering you, do you know if the heat shield ( i found on) will work with those injector bumps on the manifold? I want to wait just a little longer till I find out for sure. And do you know what shipping on the sway bar would be to 44805?

Mike Wilson

Re: 1972 C10 Parting
 

Hi Mike,

http://67-72chevytrucks.com/vboard/s...d.php?t=670605

This heat stove is the one that goes with the manifolds I am selling. Both are correct for a 72 C10 from the factory. The heat stove in the link is sold pending payment but should give you a reference to what is correct. I have seen these heat stoves with holes for the injector tubes before but not sure if you need one with holes to run the manifolds. Also when looking for a heat stove, remember that 2wd and 4wd heat stoves are different.

Hope this helps,
Thomas

Re: 1972 C10 Parting
 

Hi Keith, yes the trim I have is for a long bed but it can be cut down which is what a lot of people do as the short bed trim is so much harder to find. You would be cutting 12 inches off the rear side of it to make it work for a 115 inch wheel base truck.

I also received your payment for the other parts and will ship on Monday.

Let me know and thank you,
Thomas

Re: 1972 C10 Parting
 

Thanks Thomas, that works and yes I want the good lenses. Send me a PM and we'll go from there.
John

Re: 1972 C10 Parting
 

I will take the manifolds. if I take the sway bar what would the total be for sipping with it added?

44805
Mike

Re: 1972 C10 Parting
 

PM sent,

Thank you,
Thomas

Re: 1972 C10 Parting
 

Hi Mike,

I will figure out a shipping quote for everything on Monday. It may be better in two packages but I will let you know for sure.

Thank you very much,
Thomas

Re: 1972 C10 Parting
 

How u check on horn contact rings?

Re: 1972 C10 Parting
 

$95 is fine for the visors and heat stove. I'm still interested in the other set of parchment panels when you get time. And if you have a decent heat tube to go with the stove I'd be interested. Thanks.

Re: 1972 C10 Parting
 

I guess bowtie has been sold. Please send me PM for payment info for the handles and cranks. thanks

Re: 1972 C10 Parting
 

Hello,

I looking price for pair of outside door handles and if you have a th350 dipstick approx.34".

Thanks
Joe

Re: 1972 C10 Parting
 

Do you have any taillight assembly's and brackets for a stepside?