The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 2 of 4 1 2 34
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   MO Parting out 67 C20, very well optioned. (https://67-72chevytrucks.com/vboard/showthread.php?t=749461)

rsavage 10-30-2017 07:28 PM
Re: Parting out 67 C20, very well optioned.
 
Quote:
Originally Posted by specialtyretail (Post 8071833)
Hey Rick. No good outside heater boxes, bu I do have a pair of the upper bumper mounts. I can toss them in he box with the power steering parts, $15.00 for the pair. Thanks, Fred.
OK what about the fan? Will that fit or be shipped separately? Let me know what I owe you - $15 + ?
Thanks, Rick

Myoldtruck 10-30-2017 08:39 PM
Re: Parting out 67 C20, very well optioned.
 
How about the a/c vent in the center of the dash with all plastic thats behind it that connects to the vent tubing. Also the electric plug and some wiring that connects to the heater/ac control switch. Are the outer a/c vents still available. Zip 19540

specialtyretail 10-31-2017 09:31 AM
Re: Parting out 67 C20, very well optioned.
 
Quote:
Originally Posted by rsavage (Post 8071859)
OK what about the fan? Will that fit or be shipped separately? Let me know what I owe you - $15 + ?
Thanks, Rick
It will have to ship seperately. The fan clutch is just an old junk worn out aftermarket centrifigal unit. It is not even worth shipping. The fan is in real good shape though. $30.00 shipped for it. Thanks, Fred.

specialtyretail 10-31-2017 09:33 AM
Re: Parting out 67 C20, very well optioned.
 
Quote:
Originally Posted by Myoldtruck (Post 8071938)
How about the a/c vent in the center of the dash with all plastic thats behind it that connects to the vent tubing. Also the electric plug and some wiring that connects to the heater/ac control switch. Are the outer a/c vents still available. Zip 19540
Let me get them pulled for you and get some pics. Thanks, Fred.

Canuckvetter 10-31-2017 09:46 AM
Re: Parting out 67 C20, very well optioned.
 
Quote:
Originally Posted by specialtyretail (Post 8071645)
$50.00 shipped if you can use them. Thanks, Fred.
Thanks for the pics Fred but a little too rough. I will pass.

specialtyretail 10-31-2017 10:20 AM
Re: Parting out 67 C20, very well optioned.
 
Quote:
Originally Posted by Canuckvetter (Post 8072248)
Thanks for the pics Fred but a little too rough. I will pass.
I understand. Thanks, Fred.

Never enough 10-31-2017 11:30 AM
Re: Parting out 67 C20, very well optioned.
 
Are the hood hinges in good condition and not sloppy/bent ?
Better pics ?
If good, I would take them, even a single left, if the right isn't good.
Thanks.

rsavage 10-31-2017 11:31 AM
Re: Parting out 67 C20, very well optioned.
 
Quote:
Originally Posted by specialtyretail (Post 8072237)
It will have to ship seperately. The fan clutch is just an old junk worn out aftermarket centrifigal unit. It is not even worth shipping. The fan is in real good shape though. $30.00 shipped for it. Thanks, Fred.
Ok Fred. I will send another $45 paypal to cover the bumper brackets and the fan shipping. Thanks much, Rick

Note: Payment sent via paypal

specialtyretail 10-31-2017 11:41 AM
Re: Parting out 67 C20, very well optioned.
 
Quote:
Originally Posted by rsavage (Post 8072315)
Ok Fred. I will send another $45 paypal to cover the bumper brackets and the fan shipping. Thanks much, Rick

Note: Payment sent via paypal
I will get it all boxed and ready to roll. Thanks, Fred.

Never enough 10-31-2017 12:09 PM
Re: Parting out 67 C20, very well optioned.
 
Next in line for the center A/C vent.

specialtyretail 10-31-2017 01:11 PM
Re: Parting out 67 C20, very well optioned.
 
Quote:
Originally Posted by Never enough (Post 8072314)
Are the hood hinges in good condition and not sloppy/bent ?
Better pics ?
If good, I would take them, even a single left, if the right isn't good.
Thanks.
Let me get you some pics this evening. Thanks, Fred.

Never enough 10-31-2017 10:37 PM
Re: Parting out 67 C20, very well optioned.
 
Quote:
Originally Posted by Never enough (Post 8072314)
Are the hood hinges in good condition and not sloppy/bent ?
Better pics ?
If good, I would take them, even a single left, if the right isn't good.
Thanks.
Quote:
Originally Posted by specialtyretail (Post 8072375)
Let me get you some pics this evening. Thanks, Fred.
?? Also, if the high hump is no good, I'd like the attaching screws...condition/price ?

specialtyretail 10-31-2017 11:13 PM
Re: Parting out 67 C20, very well optioned.
 
I got some pics of the hinges, will post themthem in the morning. The hump is good, I have it listed on here. Thanks, Fred.

Never enough 10-31-2017 11:29 PM
Re: Parting out 67 C20, very well optioned.
 
Quote:
Originally Posted by specialtyretail (Post 8072748)
I got some pics of the hinges, will post themthem in the morning. The hump is good, I have it listed on here. Thanks, Fred.
10-4, go to bed... :lol: I am

specialtyretail 11-01-2017 08:01 AM
Re: Parting out 67 C20, very well optioned.
 
4 Attachment(s)
Quote:
Originally Posted by Never enough (Post 8072755)
10-4, go to bed... :lol: I am
SOLD,,,, THA NKS.... Let me get these posted before I head to work. Thanks, Fred.

Never enough 11-01-2017 08:23 AM
Re: Parting out 67 C20, very well optioned.
 
Hard to judge how tight they are from pics but they appear to be better than the ones on the truck. I'll get them, but did you see my other question about a left door actuator and handle ? Handle is for a '69.

If you pull the springs and fold the hinges, they fit in a much smaller box...;)

Grumpy old man 11-01-2017 08:37 AM
Re: Parting out 67 C20, very well optioned.
 
Interested in the 4 speed column , When your ready to pull it ?:chevy:

projectking 11-01-2017 08:57 AM
Re: Parting out 67 C20, very well optioned.
 
Drivers side vent window if it's non tinted glass and you actually have it?

specialtyretail 11-01-2017 11:01 AM
Re: Parting out 67 C20, very well optioned.
 
Quote:
Originally Posted by Never enough (Post 8072857)
Hard to judge how tight they are from pics but they appear to be better than the ones on the truck. I'll get them, but did you see my other question about a left door actuator and handle ? Handle is for a '69.

If you pull the springs and fold the hinges, they fit in a much smaller box...;)
They are yours. Sorry, no interior door stuff at all. Thanks, Fred.

specialtyretail 11-01-2017 11:56 AM
Re: Parting out 67 C20, very well optioned.
 
Quote:
Originally Posted by projectking (Post 8072872)
Drivers side vent window if it's non tinted glass and you actually have it?
Sorry, no door internals at all. Thanks, Fred.

Never enough 11-01-2017 12:03 PM
Re: Parting out 67 C20, very well optioned.
 
Quote:
Originally Posted by specialtyretail (Post 8072990)
Sorry, no door internals at all. Thanks, Fred.
OK, funds sent.
Any decision on the center A/C vent before you ship ?

Myoldtruck 11-01-2017 01:00 PM
Re: Parting out 67 C20, very well optioned.
 
Im still in it for the a/c dash vents.

specialtyretail 11-01-2017 01:18 PM
Re: Parting out 67 C20, very well optioned.
 
Quote:
Originally Posted by Myoldtruck (Post 8073054)
Im still in it for the a/c dash vents.
Yes, you are. i just had a lot going on last night and did not get out to the shop. Should have some info for you tonight. Thanks, Fred.

greywurm 11-02-2017 12:03 PM
Re: Parting out 67 C20, very well optioned.
 
1 Attachment(s)
Do you have this style carrier bearing mount? I believe it's for manual transmission drive shafts.

chuckmc8 11-03-2017 05:31 AM
Re: Parting out 67 C20, very well optioned.
 
Fred, Do you have a nice 67 rearview mirror head?

specialtyretail 11-04-2017 08:44 AM
Re: Parting out 67 C20, very well optioned.
 
Quote:
Originally Posted by Grumpy old man (Post 8072863)
Interested in the 4 speed column , When your ready to pull it ?:chevy:
I have a local wanting the column bowl. Also, you do know that the 67 - 68 is the impaler shaft, one solid shaft from the gear box to the steering wheel. Thanks, Fred.

specialtyretail 11-04-2017 08:47 AM
Re: Parting out 67 C20, very well optioned.
 
Quote:
Originally Posted by chuckmc8 (Post 8074295)
Fred, Do you have a nice 67 rearview mirror head?
This what came out of it. It has the typical checking and hazing, needs a good cleaning. If you can use it, $12.00 shipped. Thanks, Fred.

specialtyretail 11-04-2017 10:10 AM
Re: Parting out 67 C20, very well optioned.
 
4 Attachment(s)
Quote:
Originally Posted by Myoldtruck (Post 8071938)
How about the a/c vent in the center of the dash with all plastic thats behind it that connects to the vent tubing. Also the electric plug and some wiring that connects to the heater/ac control switch. Are the outer a/c vents still available. Zip 19540
SOLD,,,, THANKS.... Just got these pulled. They need a good cleaning. The center vent moves freely, the outside ones are very tight. $42.00 shipped for all three, includes screws. Thanks, Fred.

Perpendicular 11-04-2017 11:47 AM
Re: Parting out 67 C20, very well optioned.
 
Rear bumper brackets available? If so, how much shipped to 23432?

-Paul

specialtyretail 11-04-2017 12:01 PM
Re: Parting out 67 C20, very well optioned.
 
Quote:
Originally Posted by Perpendicular (Post 8075058)
Rear bumper brackets available? If so, how much shipped to 23432?

-Paul
Sorry, no rear bumper brackets. Thanks, Fred.

Myoldtruck 11-04-2017 04:44 PM
Re: Parting out 67 C20, very well optioned.
 
Money sent for the a/c vents, thank you.

specialtyretail 11-04-2017 05:41 PM
Re: Parting out 67 C20, very well optioned.
 
Quote:
Originally Posted by Myoldtruck (Post 8075198)
Money sent for the a/c vents, thank you.
Going out Monday. Thanks, Fred.

specialtyretail 11-06-2017 06:06 PM
Re: Parting out 67 C20, very well optioned.
 
Probably going to do a radio repair panel cut out of the dash if anyone needs it. Thanks, Fred.

Azmxdad 11-06-2017 10:16 PM
Re: Parting out 67 C20, very well optioned.
 
How much for the clutch pedal shipped to 85741?

specialtyretail 11-06-2017 10:55 PM
Re: Parting out 67 C20, very well optioned.
 
Quote:
Originally Posted by Azmxdad (Post 8076923)
How much for the clutch pedal shipped to 85741?
$65.00 for the assembly, shipped. Thanks, Fred.

Never enough 11-07-2017 09:04 AM
Re: Parting out 67 C20, very well optioned.
 
Quote:
Originally Posted by Never enough (Post 8072857)
Hard to judge how tight they are from pics but they appear to be better than the ones on the truck. I'll get them, but did you see my other question about a left door actuator and handle ? Handle is for a '69.

If you pull the springs and fold the hinges, they fit in a much smaller box...;)
Hinges arrived yesterday. Already on and a huge improvement in hood alignment !!

DoneonOT 11-07-2017 10:49 AM
Re: Parting out 67 C20, very well optioned.
 
Interior door handles? Do you have any?

Jeff's bowtie's 11-07-2017 11:05 AM
Re: Parting out 67 C20, very well optioned.
 
Fred I'm looking for a good uncut engine harness for a 68 (gauge dash not lights) thanks

specialtyretail 11-07-2017 11:44 AM
Re: Parting out 67 C20, very well optioned.
 
Quote:
Originally Posted by Never enough (Post 8077148)
Hinges arrived yesterday. Already on and a huge improvement in hood alignment !!
Great, glad to hear it. Thanks, Fred.

specialtyretail 11-07-2017 11:45 AM
Re: Parting out 67 C20, very well optioned.
 
Quote:
Originally Posted by DoneonOT (Post 8077222)
Interior door handles? Do you have any?
I MAY have some odd and ends lying around. Nothing nice though. Thanks, Fred.


All times are GMT -4. The time now is 01:29 AM.
Page 2 of 4 1 2 34
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com