The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Boss 338 Wheels **GROUP BUY** (https://67-72chevytrucks.com/vboard/showthread.php?t=393027)

brossow 04-23-2010 12:05 PM

Re: Boss 338 Wheels **GROUP BUY**
 
Quote:

Originally Posted by *Dylan (Post 3936498)
Because to my knowledge this group buy wasn't going on six months ago?

eBay prices aren't significantly higher than the group buy price when shipping is figured in. Yet everyone (including me) was waiting with bated breath for the revised rims to come out, under the apparent misconception that they would actually fix the fitment issue. It was only when the -3 was about to be released into the wild that all of a sudden people were clamoring to order and I put together the group buy. If people were really hot for rims that weren't going to fit right, they could have ordered six months ago and never missed the little bit of extra money they could have saved through this GB.

VA72C10 04-23-2010 01:51 PM

Re: Boss 338 Wheels **GROUP BUY**
 
Quote:

Originally Posted by brossow (Post 3936285)
Just very irritating that after all the hype and all the wait we STILL have to grind the hubs or use spacers. I don't get it. If everyone is happy to grind away, why didn't y'all do it six months ago instead of waiting for the revised rims? :confused:

It appears the grinding now is very minimal and something that most anyone with a cheap grinder could accomplish. Before it looked to be something you had to take to a machine shop to have a good amount of material removed.

That being said, BOSS really shot themselves in the foot with this one. The good news is it will keep the number of trucks running these down somewhat so you won't have as many people with the same rims.... :)

Beatcoaster 04-23-2010 10:08 PM

Re: Boss 338 Wheels **GROUP BUY**
 
I wish they would/could get it right with the 6 lug 330's for my 69, I would be a definite customer...

Beatcoaster 04-23-2010 10:35 PM

Re: Boss 338 Wheels **GROUP BUY**
 
double post...

Sublvr72 04-23-2010 11:50 PM

Re: Boss 338 Wheels **GROUP BUY**
 
Quote:

Originally Posted by Beatcoaster (Post 3937402)
I wish they would/could get it right with the 6 lug 330's for my 69, I would be a definite customer...

what's wrong with the 330's?

Beatcoaster 04-24-2010 02:38 PM

Re: Boss 338 Wheels **GROUP BUY**
 
I am assumming I would need to get my new front rotors cut for the bore size like all the others, no?

I was also told by a local dealer the offset/bs is wrong for my truck and I would need some large spacers(especially in the rear) that wouldn't be smart to install...

Are they wrong?

brossow 04-24-2010 07:59 PM

Re: Boss 338 Wheels **GROUP BUY**
 
Quote:

Originally Posted by Beatcoaster (Post 3938312)
I am assumming I would need to get my new front rotors cut for the bore size like all the others, no?

I was also told by a local dealer the offset/bs is wrong for my truck and I would need some large spacers(especially in the rear) that wouldn't be smart to install...

Are they wrong?

They're not entirely wrong. The rear offset (at least in 20x10) is wrong for the rear by about an inch and will require a spacer (more about that below). The front is fine (once you cut down the hub or use a small spacer).

There's nothing wrong with an adapter-style spacer in the rear, unless maybe you're putting down 800 ft-lb of torque and launching like a maniac. For a daily driver there's nothing wrong with a good bolt-on spacer (such as this set that I recently purchased on eBay).

Bottom line is if you want these rims, you'll have to use spacers in the rear and work some kind of magic up front. They obviously weren't designed for our trucks, but making them work isn't difficult or dangerous.

Brent

fpjr0 04-24-2010 08:52 PM

Re: Boss 338 Wheels **GROUP BUY**
 
that kind of stinks..... I was all happy cuz I have the 1" rotor so I was thinking I was going to get away from doing anything to make the wheels fit,, but now that you mention that backspacing for the rear 20x10, I am pissed lol..... I order a 20x10 for the rear with 295/40 tire now the you guys mention the need for a spacer , do yo think I could go up to the 305/40 tire ? should fit with the spacer.... what do you guys thinkkk sorryy for being off topic a little
\\

edit" but now that I think about it those rear tires are 20x10 with a backspacing for 6.5 and a offset of +20 mm which will offset the 6.5 backspacing down to something just above the 5.5 mark... ? any body? but then again I am probably wrong.,....

than again.. I read about the adapter/spacer no big deal.. just thinking out loud...

brossow 04-25-2010 01:20 AM

Re: Boss 338 Wheels **GROUP BUY**
 
Quote:

Originally Posted by fpjr0 (Post 3938884)
edit" but now that I think about it those rear tires are 20x10 with a backspacing for 6.5 and a offset of +20 mm which will offset the 6.5 backspacing down to something just above the 5.5 mark... ? any body? but then again I am probably wrong.

I don't think you understand the difference between backspacing and offset. There's a good discussion here, but in a nutshell offset is how far the mounting surface is from the wheel's center line and backspacing is how far the mounting surface is from the inside lip of the wheel. The offset doesn't change the backspacing -- the two are fixed figures that are related but not in the way you're thinking.

adpostel 04-25-2010 09:05 AM

Re: Boss 338 Wheels **GROUP BUY**
 
So now your saying that if you are running the 1.25 rotors, you have to grind the rotor down or use a spacer AND you'll have to use a spacer in the back as well? Or is the rear spacer only if you don't have room for the larger tire. I have mini tubs in the back, so I am guessing it will be fine. The rear spacer is so that the larger tire will fit in the wheel well, not anything having to do with the hub bore size, correct?

70k52wd 04-25-2010 09:47 AM

Re: Boss 338 Wheels **GROUP BUY**
 
Quote:

Originally Posted by adpostel (Post 3939625)
So now your saying that if you are running the 1.25 rotors, you have to grind the rotor down or use a spacer AND you'll have to use a spacer in the back as well? Or is the rear spacer only if you don't have room for the larger tire. I have mini tubs in the back, so I am guessing it will be fine. The rear spacer is so that the larger tire will fit in the wheel well, not anything having to do with the hub bore size, correct?

Post #477 will answer your question about needing a spacer on the rear.

brossow 04-25-2010 11:19 AM

Re: Boss 338 Wheels **GROUP BUY**
 
Quote:

Originally Posted by adpostel (Post 3939625)
So now your saying that if you are running the 1.25 rotors, you have to grind the rotor down or use a spacer AND you'll have to use a spacer in the back as well? Or is the rear spacer only if you don't have room for the larger tire. I have mini tubs in the back, so I am guessing it will be fine. The rear spacer is so that the larger tire will fit in the wheel well, not anything having to do with the hub bore size, correct?

That's exactly what I'm saying about the front. That was a disappointment given how long we waited for the rims to be revised. However, the need for a rear spacer is nothing new. I'm surprised that anyone is still surprised by this. Simply looking at the offset should tell you that.


Quote:

Originally Posted by 70k52wd (Post 3939674)
Post #477 will answer your question about needing a spacer on the rear.

>> Link <<

mrh33916 04-25-2010 11:27 AM

Re: Boss 338 Wheels **GROUP BUY**
 
Quote:

Originally Posted by NORCAL SS (Post 3906627)
security heres what i did listen up for a customers truck. we ended up cutting the inside fenderwell and widended the wheel to 13 inches. (3 inches on inside)

then put on a mickey thompson 29x15x20 http://www.mickeythompsontires.com/s...em=SportsmanSR
on it

weldcraftwheels.com did the widening for me looked sweet!!!

Got any pictures?

Boise69 04-25-2010 11:30 AM

Re: Boss 338 Wheels **GROUP BUY**
 
I received my wheels last week (18's) and they are simply beautiful. I'm working with lolife99 to make them work with my 69 since he found the way and what a help he is!!! So i'm off to convert my front susp to 73+. I'll post a build thread on it. Thanks guys!

Security guy 04-25-2010 11:32 AM

Re: Boss 338 Wheels **GROUP BUY**
 
3 Attachment(s)
Here is some pics of the front issues. The rotor is only 2mm to big, but I agree that a grinder would fix the issue pretty easy. I haven't done mine yet, but I don't think that it will be a big deal. I wonder too who was in charge of re-designing these. Did they ever try one of these on a rotor? It would of been easy for them to machine 2mm more on the wheel but oh well, its done now. Has anyone noticed that there has been over 15,000 views of this thread? Pretty cool. Let me know if anyone else needs any pics of anything.

Attachment 576784

Attachment 576785

Attachment 576786

smith2481 04-27-2010 09:14 AM

Re: Boss 338 Wheels **GROUP BUY**
 
Anyone here any more on the wheels I ordered mine march 28th and still nothing

brossow 04-27-2010 09:36 AM

Re: Boss 338 Wheels **GROUP BUY**
 
Quote:

Originally Posted by smith2481 (Post 3943330)
Anyone here any more on the wheels I ordered mine march 28th and still nothing

Check with Sublvr72. Out of curiosity, what size and finish did you order?

6D8_C10 04-27-2010 09:46 AM

Re: Boss 338 Wheels **GROUP BUY**
 
So with the new wheels having the same issue, does it make any differnce whether I order the -2AA version in 18" or wait for the -3AA version in the 18" to be made?

brossow 04-27-2010 10:15 AM

Re: Boss 338 Wheels **GROUP BUY**
 
Quote:

Originally Posted by 6D8_C10 (Post 3943384)
So with the new wheels having the same issue, does it make any differnce whether I order the -2AA version in 18" or wait for the -3AA version in the 18" to be made?

Depends. I don't know of anyone who has compared the two side by side to measure the hub bore from top to bottom. What I gather from reading elsewhere is that the bore changed in places, but not enough at the "front" side where the interference was an issue on our trucks. My impression is that the required clearancing of the hub is considerably less than previously, but both revisions will require work. It's only an issue up front, so if you don't mind taking a little more material off the front hub and want the wheels right away, -2 is the way to go. If you aren't in a hurry, personally I'd wait for the -3 and not need to remove as much material from the hub. All depends on your needs.

Strut 04-27-2010 12:43 PM

Re: Boss 338 Wheels **GROUP BUY**
 
I ordered my set on the 23rd of march and havent got mine either. 20X10, 20X8.5 in Black..... I got a "Order Update" email on April 8th, but still nothing.....

Sublvr72 04-27-2010 04:09 PM

Re: Boss 338 Wheels **GROUP BUY**
 
Quote:

Originally Posted by Strut (Post 3943700)
I ordered my set on the 23rd of march and havent got mine either. 20X10, 20X8.5 in Black..... I got a "Order Update" email on April 8th, but still nothing.....

If you look a few pages back, you will see that black fronts are on back order.

Strut 04-27-2010 05:22 PM

Re: Boss 338 Wheels **GROUP BUY**
 
Quote:

Originally Posted by Sublvr72 (Post 3944027)
If you look a few pages back, you will see that black fronts are on back order.

I know this.... I was just stating the fact! No hard feelings.....

Ipaintgrt 04-29-2010 11:12 PM

Re: Boss 338 Wheels **GROUP BUY**
 
I finally got my wheels. I was really starting to stress without any tracking numbers and all that. You can get an immediate tracking number when you buy something off Ebay, so I thought that was a little strange. I ordered them on 4/10. Then when you order you were supposed to select Fed Ex for shipping, and then when they showed up they were on a UPS truck. Anyways they are beautiful!!!!!!! I'm glad I did it, thank you to the guys that did all this for us. Scott

brossow 04-30-2010 12:25 AM

Re: Boss 338 Wheels **GROUP BUY**
 
Quote:

Originally Posted by Ipaintgrt (Post 3949038)
I finally got my wheels. I was really starting to stress without any tracking numbers and all that. You can get an immediate tracking number when you buy something off Ebay, so I thought that was a little strange. I ordered them on 4/10. Then when you order you were supposed to select Fed Ex for shipping, and then when they showed up they were on a UPS truck. Anyways they are beautiful!!!!!!! I'm glad I did it, thank you to the guys that did all this for us. Scott

Glad you got 'em. You might have noticed this isn't eBay and Sublvr72 had AEW drop-ship the wheels to all of us, so he really didn't have good access to tracking info, nor could he control which carrier was used. Hate to see people too worried -- the very worst case scenario is that you have to call your credit card company and tell them you didn't get your merchandise and they reverse the charge. Moot point now, but no need for anyone to worry. :)

smith2481 04-30-2010 05:40 AM

Re: Boss 338 Wheels **GROUP BUY**
 
LOL I would hate to go to the worst case scenerio cause I already recieved my tires for my wheels just no wheels


All times are GMT -4. The time now is 11:48 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com