The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 29 of 41 « First 192425262728 29 303132333439 Last »
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Boss 338 Wheels **GROUP BUY** (https://67-72chevytrucks.com/vboard/showthread.php?t=393027)

mrh33916 05-20-2010 10:47 AM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by mongoose (Post 3986799)
x3.. but.. it's not like it anywhere close to being drivable.. =/
Quote:
Originally Posted by 67goatman455 (Post 3986771)
wow we ordered the exact same wheels at the same exact time! I'm wondering the same too
I ordered mine April 13th, nothing yet,

Summit Racing's website say's they won't be available until July 5th,

Wildstreak 05-20-2010 01:16 PM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by 6D8_C10 (Post 3987029)
That is what I will be getting. Most big tires in that performance range have a tread life in the 200 range. The Continental's have a life in the 500s.
I had some performance tires on my other car that had great traction but only last 4k miles. I will see how long the Continentals last on my other car.
wow someone likes to do smoke shows or drives like a race car driver, I sure hope the ones I get last wayyyyy longer than that!

6D8_C10 05-20-2010 05:18 PM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by Wildstreak (Post 3987586)
wow someone likes to do smoke shows or drives like a race car driver, I sure hope the ones I get last wayyyyy longer than that!
Well more like a race car driver. I didn't do "burn outs" nor was I doing any drifting. The problem is, that they are so soft, they don't "squeal". So, you don't know how much you are spinning. Apparently, every time I was shifting, boost was kicking in, and the wheels would spin. I would speed shift and when I would park, I would have black flakes (kinda like eraser flakes) all over my fenders and wheel wells.

Hopefully, the Continentals will "squeal" a little more, and I can adjust my heavy foot a little better. LOL

brossow 05-20-2010 05:23 PM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by 6D8_C10 (Post 3987954)
Hopefully, the Continentals will "squeal" a little more, and I can adjust my heavy foot a little better. LOL
Well, tires that hard (540 treadwear) should squeal plenty. I like mine a little softer and stickier. (And you pervs know what I'm talking about, so save the jokes!) :lol:

6D8_C10 05-20-2010 06:32 PM
Re: Boss 338 Wheels **GROUP BUY**
 
***New update**. I talked with Marcus from American Eagle today. He called me and said my 18" wheels were on their way to me. I talked with him a little bit. I asked him about the version -2 and the -3. He said that he didn't think they were going to do the -3 on the 18s, just on the 20s.

I am ok with getting -2 version of the 18s. I really didn't want to wait for another year for them to get -3 version done if they ever started to begin with.
So, you guys should not hold your breath waiting on the 18s.

I want to thank everyone that helped get the "Group Buy" together, and giving me the opportunity to buy these awesome looking wheels at such a good price!!!!!

Strut 05-20-2010 06:34 PM
Re: Boss 338 Wheels **GROUP BUY**
 
Here ya go guys:

The hub mods....

http://i295.photobucket.com/albums/m.../Photo0538.jpg

http://i295.photobucket.com/albums/m.../Photo0539.jpg

Wheels on....

http://i295.photobucket.com/albums/m...9/DSCN2285.jpg

http://i295.photobucket.com/albums/m...9/DSCN2284.jpg

http://i295.photobucket.com/albums/m...9/DSCN2286.jpg

Plan on lowering the rear down another inch to lever it out...

19stepSide72 05-20-2010 07:03 PM
Re: Boss 338 Wheels **GROUP BUY**
 
Looking good my friend.

durrettcustoms 05-20-2010 07:58 PM
Re: Boss 338 Wheels **GROUP BUY**
 
Could you give me a price on 2- 20x8.5 and 2- 20x10

Sublvr72 05-20-2010 09:21 PM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by durrettcustoms (Post 3988261)
Could you give me a price on 2- 20x8.5 and 2- 20x10
http://hid-solutions.com/categories/Wheels/

67goatman455 05-20-2010 10:59 PM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by mrh33916 (Post 3987297)
I ordered mine April 13th, nothing yet,

Summit Racing's website say's they won't be available until July 5th,
dont be holding your breath on the delivery. it will be some time from what i have heard

Sublvr72 05-22-2010 05:36 PM
Re: Boss 338 Wheels **GROUP BUY**
 
Hey guys, They had overstock on some 18x8 CHROME 5x5 wheels. I've got two sets available for $700/set plus shipping. That's $170 off normal price!

Beatcoaster 05-23-2010 01:25 AM
Re: Boss 338 Wheels **GROUP BUY**
 
Sublvr72 - Did you happen to get my pm on the Boss 313's in 6x5.5? If not let me know and I can resend the request. Thanks!

Sublvr72 05-23-2010 08:30 AM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by Beatcoaster (Post 3992071)
Sublvr72 - Did you happen to get my pm on the Boss 313's in 6x5.5? If not let me know and I can resend the request. Thanks!
I don't think I got it

6D8_C10 05-24-2010 06:35 PM
Re: Boss 338 Wheels **GROUP BUY**
 
Wooohooo! got my wheels!
Now, I didn't wait for the -3-AA.
So, until I grind the rotor, how thick a spacer do I need?
Or, do I need to do a spacer and grind on the rotor?

Thx

http://lh3.ggpht.com/_TvKsnedCXVU/S_...w%20wheels.jpghttp://lh6.ggpht.com/_TvKsnedCXVU/S_...heel%20box.jpg

brossow 05-24-2010 07:40 PM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by 6D8_C10 (Post 3994883)
Wooohooo! got my wheels!
Now, I didn't wait for the -3-AA.
So, until I grind the rotor, how thick a spacer do I need?
Or, do I need to do a spacer and grind on the rotor?
From what I've read and seen, a 1/4" spacer should do it, no grinding required. I've got a brand-new pair I've decided not to use (gonna grind instead). Send me a PM if you want them for what I paid ($18 + S&H). :)

Brent

6D8_C10 05-24-2010 07:56 PM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by brossow (Post 3994987)
From what I've read and seen, a 1/4" spacer should do it, no grinding required. I've got a brand-new pair I've decided not to use (gonna grind instead). Send me a PM if you want them for what I paid ($18 + S&H). :)

Brent
PM sent. Sounds good. Until I can get a good machine grind. Don't want to get it off balance. Or, any other screw up on brand new rotors.

67goatman455 05-25-2010 12:03 AM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by 6D8_C10 (Post 3994883)
Wooohooo! got my wheels!
Now, I didn't wait for the -3-AA.
So, until I grind the rotor, how thick a spacer do I need?
Or, do I need to do a spacer and grind on the rotor?

Thx
but! but! not fair

big_al_71 05-25-2010 07:57 AM
Re: Boss 338 Wheels **GROUP BUY**
 
Strut- the wheels look great on your truck....I really like black wheels.

orange72c10 05-25-2010 08:12 AM
Re: Boss 338 Wheels **GROUP BUY**
 
I just finally came up with the money and placed the order, can't wait

BossHogg69 05-26-2010 11:17 PM
Re: Boss 338 Wheels **GROUP BUY**
 
I thought I was waiting for the -3AA's, but when my wheels came this week they were all -2AA's... 18x8's/18x9.5's. I tried fitting my new zinc plated, cross drilled and slotted rotors in the wheels and it's not even close. :waah:

Sublvr72 05-26-2010 11:20 PM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by BossHogg69 (Post 3999351)
I thought I was waiting for the -3AA's, but when my wheels came this week they were all -2AA's... 18x8's/18x9.5's. I tried fitting my new zinc plated, cross drilled and slotted rotors in the wheels and it's not even close. :waah:
They don't think they will do the -3's in the 18" that's why I had them send -2. Even the new -3 revision doesn't clear the hub bore on the 1.25's so it's there really isn't any reason to wait. Sorry...

BossHogg69 05-26-2010 11:25 PM
Re: Boss 338 Wheels **GROUP BUY**
 
It's all good, you are right, if the 3AA's don't fit anyway, I'd still be making a trip to the machine shop. No problems with that, the deal you gave us left money in the 'budget' for stuff like that! Thanks again.

67goatman455 05-27-2010 12:26 AM
Re: Boss 338 Wheels **GROUP BUY**
 
i just want me wheels :( any idea on when the gray 20's will be back in stock?

TxSqueeze 05-27-2010 05:49 AM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by 67goatman455 (Post 3999492)
i just want me wheels :( any idea on when the gray 20's will be back in stock?
I'm wondering the same thing.

Strut 05-27-2010 07:19 AM
Re: Boss 338 Wheels **GROUP BUY**
 
Quote:
Originally Posted by big_al_71 (Post 3995946)
Strut- the wheels look great on your truck....I really like black wheels.
Thanks Big Al....


All times are GMT -4. The time now is 11:50 PM.
Page 29 of 41 « First 192425262728 29 303132333439 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com