The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 3 of 6

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - FL 1970 Dash (https://67-72chevytrucks.com/vboard/showthread.php?t=438883)

gastrader35

01-07-2011 09:26 PM

Re: 1970 Dash

The trans linkage frame bracket i meant to say

Chilli

01-07-2011 09:30 PM

Re: 1970 Dash

Quote:

Originally Posted by too much stuff (Post 4389797)

Tell your son happy birthday. So i am in for the glovebox door, gas pedal, engine stands (pictured) heat shield if it is there, and it looks like a steering bracket laying on the frame in front of the engine stand on the drivers side. Also, is there a power steering canister bolted to the drivers fender? Let me know a total when you have time. Eric
If you still have the engine, are the brackets or pullies for sale? There may also be a trans kickdown switch on the carb for the 400.

Trans bracket damaged
Engine saddles $25.00 for the pair shipped
Engine mounts on block $5.00 for the pair shipped
Power steering canister on inner fender $5.00 shipped
Gas pedal broken
Still don't know if I have the heat shield
AC brackets for big block $65.00 complete
AC compressor and lines $35.00
I want to keep the power steering pump and brackets for my project
Chilli

gastrader35

01-07-2011 09:32 PM

Re: 1970 Dash

So is the frame saddles sold

Chilli

01-07-2011 09:34 PM

Re: 1970 Dash

Quote:

Originally Posted by sharpie1972 (Post 4394738)

Dang! that's a little less than the $60 you hit me up for! Nice buy. Sharpie

I posted pics with the new price after i saw the surface rust
Sorry Sharpie
Chilli

Chilli

01-07-2011 09:34 PM

Re: 1970 Dash

Quote:

Originally Posted by gastrader35 (Post 4394790)

So is the frame saddles sold

I believe they are

gastrader35

01-07-2011 09:37 PM

Re: 1970 Dash

1 Attachment(s)

These are the parts i need plus the high hump. Frame saddles too if not sold. What is damaged on the linkage bracket

Chilli

01-07-2011 09:45 PM

Re: 1970 Dash

Quote:

Originally Posted by gastrader35 (Post 4394803)

These are the parts i need plus the high hump. Frame saddles too if not sold. What is damaged on the linkage bracket

you need that bracket and rod??
If so $15.00 shipped
I will let you know on the saddles
Chilli

gastrader35

01-07-2011 09:49 PM

Re: 1970 Dash

Yes the bracket that bolts to frame and rod with the bracket on it should be 3 pieces . Add it to the high hump and let me know on the saddles

sharpie1972

01-07-2011 10:07 PM

Re: 1970 Dash

Quote:

Originally Posted by Chilli (Post 4394793)

I posted pics with the new price after i saw the surface rust
Sorry Sharpie
Chilli

No worries. Glad you're getting parts sold! I see the $20 price in post #22. My mistake! Sharpie

gastrader35

01-07-2011 10:36 PM

Re: 1970 Dash

could you post a pic of the rod , frame bracket and the bracket on the rod

too much stuff

01-07-2011 11:56 PM

Re: 1970 Dash

Quote:

Originally Posted by Chilli (Post 4394780)

I will take the engine saddles for $25, power steering canister for $5, AC brackets for $65 and the glove box door. Can we check shipping on the compressor and lines? Does it spin freely?
If you are keeping the power steering setup, you may want to keep the canister unless you have another. I will send a PM for the total. Thanks.

70BLAZERX2

01-08-2011 10:56 AM

Re: 1970 Dash

for easy shipping, how much for both sets of seat tracks shipped to 37745

Thank you

70BLAZERX2

01-08-2011 11:12 AM

Re: 1970 Dash

Has anyone noticed that it has a POSI REAR..:lol:

gastrader35

01-08-2011 03:59 PM

Re: 1970 Dash

add that gas pedal , mounting bracket and cable to my other stuff.

70BLAZERX2

01-12-2011 03:27 PM

Re: 1970 Dash

any update? I am interested in seat brackets. if stock seats

apollos1970

01-12-2011 07:42 PM

Re: 1970 Dash

pm sent

GobbleStalker

01-12-2011 09:33 PM

Re: 1970 Dash

Interested in the posi rearend. Do you know ther gearing?

70BLAZERX2

01-13-2011 11:30 AM

Re: 1970 Dash

Quote:

Originally Posted by GobbleStalker (Post 4407254)

Interested in the posi rearend. Do you know ther gearing?

should be a 3.73 as that was the standard gear ratio...3.08 and 4.10 would have been listed on glovbox label.

He needs to reply..lots of good parts on this truck

Chilli

01-13-2011 01:08 PM

Re: 1970 Dash

I have not forgotten about all of the parts you guys want but I will be out of town until the 23rd .
Thanks for your patience.
Chilli

Chilli

01-13-2011 01:09 PM

Re: 1970 Dash

Quote:

Originally Posted by GobbleStalker (Post 4407254)

Interested in the posi rearend. Do you know ther gearing?

the rear is not for sale ,Thanks
Chilli

tjsblazer

01-13-2011 02:34 PM

Re: 1970 Dash

Interested in the oil guage only out of the dash if it is an 80lb.

Chilli

01-19-2011 08:18 PM

Re: 1970 Dash

Quote:

Originally Posted by burb71 (Post 4389698)

Is that a big block truck?
I'll take all of the factory exhuast hanger brackets
Can I see pics of them?

no factory hanger left
Thanks Chilli

Chilli

01-19-2011 08:26 PM

Re: 1970 Dash

Quote:

Originally Posted by gastrader35 (Post 4394762)

Allright then the high hump and frame bracket AND ENGINE SADDLES

the engine saddles are spoken for already , but the high hump and trans brackets are avail.

Chilli

01-19-2011 08:30 PM

Re: 1970 Dash

Quote:

Originally Posted by GobbleStalker (Post 4407254)

Interested in the posi rearend. Do you know ther gearing?

rear is not for sale
Thanks Chilli

Chilli

01-19-2011 08:32 PM

Re: 1970 Dash

Quote:

Originally Posted by tjsblazer (Post 4408608)

Interested in the oil guage only out of the dash if it is an 80lb.

oil gauge does not have psi # on it just low to high

All times are GMT -4. The time now is 03:17 PM.

Page 3 of 6

Show 40 post(s) from this thread on one page