The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   OR Making room for new project - Parts for sale (https://67-72chevytrucks.com/vboard/showthread.php?t=443700)

Fldawg 02-02-2011 07:49 PM

Re: Making room for new project - Parts for sale
 
Iwould be interested in the 6 cyl. fan shroud but i don't need the fan

lmk on that ........Thanks Tom

70cst 02-02-2011 08:31 PM

Re: Making room for new project - Parts for sale
 
Please be sure "ALL" sales are done on out in the open in this thread and not through PM's. Thanks

72BlckButy 02-02-2011 08:59 PM

Re: Making room for new project - Parts for sale
 
Posted: 01-30-2011, 10:52 AM
Quote:

Originally Posted by Mt Man Chad (Post 4449240)
I will be adding parts as the day goes on as well as photos. larger items are for sale locally as well. Prices do not include shipping. If prices seem out of line make me a offer. Priority mail prefered or UPS can do Grey hound on larger items. Will post pics of all parts requested.

I6 power steering bracket bolts on bottom of pump, early style $12 SOLD 72shortstep

Posted: 01-30-2011, 02:18 PM
Quote:

Originally Posted by 72BlckButy (Post 4449634)
Would like to see:

I6 power steering bracket bolts on bottom of pump, early style $12

Posted: 01-31-2011, 04:39 PM
Quote:

Originally Posted by Mt Man Chad (Post 4452652)
Guys bare with me...
Buried in work and on phone with boss most of the day!
...As well detail pics of items requested.

Posted: Yesterday, 06:14 AM
Quote:

Originally Posted by 72shortstep (Post 4454104)
Ill take that I6 power steering bracket if it gets to me. Just PM me a total to 29461 if i get it, really need one of these.

Posted: Yesterday, 02:15 PM
Quote:

Originally Posted by 72BlckButy (Post 4454930)
Mt Man Chad... I wanted to let you know that I'm still interested in the I6 bracket; just need to see a pic of it to make sure it's related what I need.

Posted: Yesterday, 04:04 PM
Quote:

Originally Posted by Mt Man Chad (Post 4455206)
72blackbuty - I'll take another pic and one as install on my I6 250.

Posted: Yesterday, 05:00 PM
Quote:

Originally Posted by Mt Man Chad (Post 4455336)
72Blkbuty - Pics of inline 6 Power steering pump "bottom bracket" hard to see in as installed photos but you can at least see complete assembly in following link thanks to Frank!

http://67-72chevytrucks.com/vboard/s...d.php?t=443241

Posted: Today, 06:31 PM
Quote:

Originally Posted by 70cst (Post 4458090)
Please be sure "ALL" sales are done on out in the open in this thread and not through PM's. Thanks

EDITED: Last edited by Mt Man Chad; Today at 02:21 PM
Quote:

Originally Posted by Mt Man Chad (Post 4449240)
I6 power steering bracket bolts on bottom of pump, early style $12 SOLD 72shortstep

Ouch... kind of curious what happened here.

Mt Man Chad 02-02-2011 10:17 PM

Re: Making room for new project - Parts for sale
 
I missed this, my mistake....
72BlckButy - I will find you parts requested!

Fldawg - Will box up shroud and getting shipping price in the AM.

Grey hound shipping quote for Step side fenders will have back in AM.
Sanding down 68 fender so no surprises what being sold.

Once again, VERY sorry for the delay and misunderstandings on my end!
Working on large project in SoCAL and interviews for new job this week.

70cst 02-02-2011 10:22 PM

Re: Making room for new project - Parts for sale
 
Quote:

Originally Posted by Mt Man Chad (Post 4458382)
I missed this, my mistake....
72BlckButy - I will find you parts requested!

Great Follow Up Mt Man Chad ...:metal:

Mt Man Chad 02-03-2011 12:26 PM

Re: Making room for new project - Parts for sale
 
5 Attachment(s)
Greyhound quotes - I need the name of the city that has the grey hound service nearest you. What city you will be picking them up in let me know what city it shows on there site.
Not all zip codes work on the Greyhound site see link.

http://www.shipgreyhound.com/scripts...s/gpxStep2.asp

Box info - Each step side wheel well box measures 60" X 26" X 14" and 50 pound each with the steps included 45 pounds if you don't want the steps. This may help a few of you out.

Heavy Evy - pics of 1/2 ton dog dish caps. One could use a little with paint touchup.
Fldawg - boxed up in USPS priority box for I6 fan shroud looks like new $30.00 shipped.
70STOVEBOLT - I will get pics of air cleaner and shipping cost.
lolife99 - pics of step side steps noticed small crack on drivers side.
Fesser - Pics of 67 dash center section, just surface rust. Will be cutout at black line if you need more of it let me know $25 + 12 shipping UPS or USPS your choice.


Can ship tomorrow if still interested.

lolife99 02-03-2011 12:34 PM

Re: Making room for new project - Parts for sale
 
I replied to your PM.
Per forum rules I will reply here.

I am interested in the stepside steps only.
I'm not interested in the rear stepside fenders.
Shipping needs to be direct to 65251.
No greyhound terminal.
Can you use UPS or FedEx?

70STOVEBOLT 02-03-2011 02:01 PM

Re: Making room for new project - Parts for sale
 
If Sharpie passes on the offset air cleaner, I will take it.

lolife99 02-03-2011 02:33 PM

Re: Making room for new project - Parts for sale
 
PM sent about shipping.

lolife99 02-03-2011 07:22 PM

Re: Making room for new project - Parts for sale
 
I'll take the steps.
Money sent via Paypal.

Thanks.

72BlckButy 02-04-2011 10:15 PM

Re: Making room for new project - Parts for sale
 
Quote:

Originally Posted by Mt Man Chad (Post 4458382)
I missed this, my mistake....
72BlckButy - I will find you parts requested!

Once again, VERY sorry for the delay and misunderstandings on my end!
Working on large project in SoCAL and interviews for new job this week.

Still interested in this piece.

Mt Man Chad 02-04-2011 10:20 PM

Re: Making room for new project - Parts for sale
 
Currently looking.......

white 67 02-05-2011 12:53 AM

Re: Making room for new project - Parts for sale
 
Im interested in the 67 dash center section and the small block engine mounts. pm sent

Mt Man Chad 02-06-2011 01:16 PM

Re: Making room for new project - Parts for sale
 
67 Dash center SOLD to Fesser, he was first in line.
White 67, if you still want the V8 engine mounts let me know I can ship out tomorrow!

white 67 02-06-2011 04:49 PM

Re: Making room for new project - Parts for sale
 
Ok ill take the engine mounts.

70STOVEBOLT 02-06-2011 05:42 PM

Re: Making room for new project - Parts for sale
 
Chad, did you get me a shipping quote on the offset air cleaner?

Thanks,
Mark

gsd66nova 02-06-2011 08:09 PM

Re: Making room for new project - Parts for sale
 
Hello, Are either of the gmc rad. supports still available?


Thanks, Shane.

Mt Man Chad 02-06-2011 08:33 PM

Re: Making room for new project - Parts for sale
 
CrewCab59 - send me your Zip please so I can get a shipping quote for Radiator support.
Boxed up and ready to go, can get a accurate number or you thru Greyhound.

CC69Rat 02-07-2011 11:13 AM

Re: Making room for new project - Parts for sale
 
Just curious, my other lead on a 68 PS fender didn't work out .. did someone take it already? If not, I'll jump back in line. I think Hoss67 was next and I noticed a couple others .. if it get's back to me I'm still interested.

lytemup454 02-07-2011 11:25 PM

Re: Making room for new project - Parts for sale
 
any pics of that tailgate?

Mt Man Chad 02-07-2011 11:43 PM

Re: Making room for new project - Parts for sale
 
2 Attachment(s)
Pulled tailgates out this evening, I will post detailed pic in the AM.
Here's pics for Sharpie of offset I6 air cleaner somebody else is inline on this. The intake is a little dented but easy to work with.
Freshly caustic dipped and painted, no rust!
67/68 Glove box emblem pic for - 67chevy1series

67chevy1series 02-09-2011 09:08 PM

Re: Making room for new project - Parts for sale
 
looks good chad is there clips on the 2 studs ?

sharpie1972 02-10-2011 12:38 AM

Re: Making room for new project - Parts for sale
 
Hi Chad, Stovebolt can have his shot at the air cleaner. Everything else arrived today. PM sent. Thanks, Sharpie

68chevyfuelie 02-10-2011 08:52 AM

Re: Making room for new project - Parts for sale
 
"Hurst Indy H 3 speed floor shifter $30
GMC headlight harness complete w/marker light. one wire cut at very end Green to horn $40"

Can you check shipping on these as well for me, please? No hurry. Thanks!

70STOVEBOLT 02-10-2011 11:42 AM

Re: Making room for new project - Parts for sale
 
Quote:

Originally Posted by sharpie1972 (Post 4475166)
Hi Chad, Stovebolt can have his shot at the air cleaner. Everything else arrived today. PM sent. Thanks, Sharpie

Chad, could I see a pic of the underside of that air cleaner, so I can see how much damage there is? Also, I will need a shipping quote to 46562.

Thanks,
Mark


All times are GMT -4. The time now is 01:29 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com