Re: Mdo 69
 

I'd say that is a good deal. Newer motors sound like a deal when people pull them from the scrap yard, but parts for them add up much faster than a Gen 1 or 2 small block! Good deal! Now hurry up and put them on so I can see how you run the exhaust!!! ;) Merry Christmas Btw! If you don't celebrate, happy 25th of December!
Posted via Mobile Device

Re: Mdo 69
 

Your right about the co$t adding up Lefty, as far as the exhaust goes I'm not sure yet. Thanks for wishing me a Merry Christmas, same to you and yours.

I hope to fire it up this week.
Posted via Mobile Device

Re: Mdo 69
 

I got the tank intalled but not completed, I still need to modify the filler neck. The wiring harness is complete, atleast enough to fire up the motor.

I need to hook up the fuel lines and ground the motor.

I put the Trailblazer SS manifold on the engine and had enough room between them and the frame that I was able to move the engine forward and use the old drive shaft. BIG PLUS.

Re: Mdo 69
 

I received my Trailblazer SS exhaust manifolds from gmpartsdirect.com $135 shipped they fit great had no issues with shipping or quality.

I bolted them up and I am very pleased with the way they fit, I might have to grind a little on the passengers side frame rail.

Re: Mdo 69
 

When I bought this truck it had an 89 tbi 350/700r4

I'm using the 89 model radiator, I looked at the upper and lower radiator hoses for a 2005 tahoe, since thats what my 5.3 came out of. I believe I can use those hoses with my radiator.

Using the TBSS manifolds and the dirty dingo adjustable mounts, with late 70's early 80's motor mounts, I was able to use my new drive shaft that was actually made to work with the 350/700r4.

Re: Mdo 69
 

I got my motor started today!
Posted via Mobile Device

Re: Mdo 69
 

I might need a new cab, I'm running out of time and I need to finish this truck by June. If anyone knows about a good cab near NC let me know, mean while I'll keep working on mine.
Posted via Mobile Device

Re: Mdo 69
 

I got a line on a nice cab over here in TN. I am about an hour and 15 minutes from you. It doesn't belong to me, but I know the guy that has it. It has no title though. PM me for more info if you decide to go that way.

Re: Mdo 69
 

I know of a man near Knoxville who says he has a lot of these trucks, is this the man your talking about.

Tell me about this cab.
Posted via Mobile Device

Re: Mdo 69
 

Sent you a PM
Posted via Mobile Device

Re: Mdo 69
 

And no it's not Dean in Knoxville
Posted via Mobile Device

Re: Mdo 69
 

well decided to work on my cab, had to do alot of welding since the cab had been hit on the passenger side, and had tons of rust.

Re: Mdo 69
 

door

Re: Mdo 69
 

And on

Re: Mdo 69
 

5.3L
Posted via Mobile Device

Re: Mdo 69
 

Filler neck
Posted via Mobile Device

Re: Mdo 69
 

The cab is now ready for some grinding, primer, body filler and lots of sanding.

Re: Mdo 69
 

tank painted and installed using silver colored POR15 paint

Re: Mdo 69
 

I lowered the rear 5" with CPP lowering springs, I used 4 degree shims and deluxe trac bar.

I used CPP rear shock relocator, I tried to used the factory ride height front shocks, they would not extend enought no even bolt on, I tried my stock rear shocks and they worked.

I'm still working on the front suspension, I don't know what I'm going to do about the front shocks yet.
Posted via Mobile Device

Re: Mdo 69
 

Rear shocks installed
Posted via Mobile Device

Re: Mdo 69
 

Rear
Posted via Mobile Device

Re: Mdo 69
 

I'm going to try copper brake lines, got them at advance auto $86
Posted via Mobile Device

Re: Mdo 69
 

Driver door
Posted via Mobile Device
Posted via Mobile Device

Re: Mdo 69
 

Door ready
Posted via Mobile Device

Re: Mdo 69
 

POR15 one coat, may give it another
Posted via Mobile Device