Originally Posted by 19702wdc10 (Post 7175056)

Hello,

I looking price for pair of outside door handles and if you have a th350 dipstick approx.34".

Thanks
Joe

Originally Posted by Cmillet (Post 7175076)

Do you have any taillight assembly's and brackets for a stepside?

Originally Posted by chastain90 (Post 7174731)

I guess bowtie has been sold. Please send me PM for payment info for the handles and cranks. thanks

Originally Posted by bean (Post 7174658)

How u check on horn contact rings?

Originally Posted by DLTruck1973 (Post 7173758)

OK, I did some work here and got you a shipping quote for both UPS and freight.

I can do everything UPS in multiple packages for packages for $135.00. Freight came out to be $235.00.

The parts total came to $410 but we can give you everything for $400.00 even. The grand total with shipping is $535.00 UPS or add $100.00 if you wanted it freight shipped.

I can get this ready to go on Monday for you., Send me a PM and I will give you payment information if interested.

Thank you,
Thomas

Originally Posted by DLTruck1973 (Post 7175090)

In post #9 there are photos of the door handles I have available. Very nice driver quality, $65.00 for the pair. I should have a TH350 trans dip stip and tube for you but I need to check on Monday.

I will let you know,

Thank you,
Thomas

Originally Posted by Chevy Fan Always (Post 7176566)

Just wanted to make sure the sway bar was for a half-ton?
Mike

Originally Posted by uaengineer (Post 7174664)

$95 is fine for the visors and heat stove. I'm still interested in the other set of parchment panels when you get time. And if you have a decent heat tube to go with the stove I'd be interested. Thanks.

Originally Posted by 19702wdc10 (Post 7175056)

Hello,

I looking price for pair of outside door handles and if you have a th350 dipstick approx.34".

Thanks
Joe

Originally Posted by Chevy Fan Always (Post 7174587)

I will take the manifolds. if I take the sway bar what would the total be for sipping with it added?

44805
Mike

Originally Posted by DLTruck1973 (Post 7176973)

I can add the tube for the heat stove for an extra $20.00. It should ship with the visors and heat stove without an additional ship charge. That would be $115.00 total.

I sent PM with information.

Thank you,
Thomas

Originally Posted by DLTruck1973 (Post 7177003)

Hi Joe,

Nothing I see that is 34" lng. Most of the ones I have are around 24" which is a typical C10/C20 TH350 tube length.

If you know the application, I can look it up that way and see if we have one in inventory.

Thank you,
Thomas

Originally Posted by DLTruck1973 (Post 7177269)

Hi Mike,

It will be better to package in two packages. The sway bar will cost $40.00 to ship so $90.00 total on that plus the price of the manifolds shipped at $165.00 for a new total of $255.00

Let me know and I can get everything ready to ship for you.

Thank you,
Thomas

Originally Posted by chastain90 (Post 7174731)

I guess bowtie has been sold. Please send me PM for payment info for the handles and cranks. thanks

Originally Posted by 46stude (Post 7177989)

I mailed off the MO for the upper dr door trim & parking light lenses Monday morning. ;)

Originally Posted by Chevy Fan Always (Post 7177912)

Sounds good, send me your Paypal.

Mike

Originally Posted by 19702wdc10 (Post 7177870)

I will measure mine again tonight and let you know.
The application is a 1970 C10 with 250 straight six and TH350

Does the $65.00 for the door handles include shipping to VA 22508?

Thanks
Joe

Originally Posted by doodah man (Post 7178289)

I'm interested in the passenger-side parking lamp housing if it's complete and in good condition. Let me know price + shipping to 19104. Thanks.

Originally Posted by doodah man (Post 7178314)

Thanks Thomas. Does it include the gasket? Either way, I'll take it. How will you ship? You can PM with answers and paypal info.

Craig.

Originally Posted by Chevy Fan Always (Post 7177912)

Sounds good, send me your Paypal.

Mike

Originally Posted by Stu Pidd (Post 7179339)

Where is Junction City?

I'm in the Portland area often, and need a fan shroud for the '71.

edit: I see you're near Eugene. Kinda far for a drive. Are you close the Eugene airport?

Originally Posted by Dewey72 (Post 7179643)

Looking for a drivers side 72 pickup door. Got one?

Originally Posted by Dewey72 (Post 7179733)

A speaker hole is ok, I can repair that.

Originally Posted by Dewey72 (Post 7179790)

Ok I will let ya know. That was off a 72 right. Cant see the screw hole were the wing window comes in.

Originally Posted by DLTruck1973 (Post 7178202)

To my knowledge the trans dipstick and tube for a TH350 should be the same for a 250 I6 and 350 V8 engine. The ones I have measured here are around 24 inches long.

The price on door handles do not include shipping but I can ship them to you for $7.00 so that would be $72.00 total for the handles.

Let me know and thank you,
Thomas

Originally Posted by 19702wdc10 (Post 7180554)

I measured the old dipstick tube and it is 34", 33" above the transmission and 1" into the transmission. I have the shorter one in it right now but was hoping to find longer one. Could it be from a later model truck?

Thanks
Joe

Originally Posted by Tilldogg (Post 7189341)

Do you have the body still? Im looking for the A Pillar post passenger side, if it can be cut of cab level to include some of the roof,
Thanks
Posted via Mobile Device

Originally Posted by Tilldogg (Post 7189407)

Here is a picture of the bit i need,