The 1947 - Present Chevrolet & GMC Truck Message Board Network - MO Parting out 67 C20, very well optioned.

Page 3 of 4

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - MO Parting out 67 C20, very well optioned. (https://67-72chevytrucks.com/vboard/showthread.php?t=749461)

specialtyretail

11-07-2017 11:46 AM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by Jeff's bowtie's (Post 8077228)

Fred I'm looking for a good uncut engine harness for a 68 (gauge dash not lights) thanks

How quick are you needing it? I am going to TRY and start on the C30 Sunday. Thanks, Fred.

dfwright

11-07-2017 05:46 PM

Re: Parting out 67 C20, very well optioned.

Fred, I thought I'd remind you that I'm still in the market for a heater control, if you come across one in fair condition.

specialtyretail

11-07-2017 06:46 PM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by dfwright (Post 8077454)

Fred, I thought I'd remind you that I'm still in the market for a heater control, if you come across one in fair condition.

Yes sir, if i find a good one, you will be the first to know. Thanks, Fred.

Never enough

11-07-2017 06:54 PM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by specialtyretail (Post 8077243)

How quick are you needing it? I am going to TRY and start on the C30 Sunday. Thanks, Fred.

C30 have fender emblems ?

specialtyretail

11-07-2017 07:49 PM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by Never enough (Post 8077480)

C30 have fender emblems ?

I will look Wednesday. Thanks, Fred.

inline67c20

11-08-2017 05:02 PM

Re: Parting out 67 C20, very well optioned.

Fred, could I get the ram horns and heat shields

specialtyretail

11-08-2017 05:29 PM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by inline67c20 (Post 8078156)

Fred, could I get the ram horns and heat shields

I have the heat shields listed here on the forum. I have not pulled the manifolds yet. How quickly are you needing them? Thanks, Fred.

inline67c20

11-08-2017 05:56 PM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by specialtyretail (Post 8078167)

I have the heat shields listed here on the forum. I have not pulled the manifolds yet. How quickly are you needing them? Thanks, Fred.

I am not in big hurry, when you get to them would be fine.

greywurm

11-08-2017 10:52 PM

Re: Parting out 67 C20, very well optioned.

Just checking in case you missed the request for the carrier bearing mount. I didn't see an answer either way. Thanks

unclefreddy

11-09-2017 06:23 PM

Re: Parting out 67 C20, very well optioned.

Hi Fred, I need the "guts" to the horn button inside the steering wheel. If you do ..... how much $$$$ Thanks, Rick

specialtyretail

11-10-2017 12:44 AM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by greywurm (Post 8078377)

Just checking in case you missed the request for the carrier bearing mount. I didn't see an answer either way. Thanks

Sorry, I did miss it. Let me check Saturday if that works for you. Thanks, Fred.

specialtyretail

11-10-2017 07:55 PM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by Never enough (Post 8077480)

C30 have fender emblems ?

I am sorry. I have not been to the shop in daylight hours since Tuesday. I will look and get you some pics Saturday. Thanks, Fred.

greywurm

11-10-2017 09:00 PM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by specialtyretail (Post 8079172)

Sorry, I did miss it. Let me check Saturday if that works for you. Thanks, Fred.

That is fine. Thanks.

unclefreddy

11-11-2017 12:23 AM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by unclefreddy (Post 8078928)

Hi Fred, I need the "guts" to the horn button inside the steering wheel. If you do ..... how much $$$$ Thanks, Rick

I also need the spacer for the ignition switch (1967) :)

specialtyretail

11-13-2017 01:52 PM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by Jeff's bowtie's (Post 8077228)

Fred I'm looking for a good uncut engine harness for a 68 (gauge dash not lights) thanks

I checked, I cannot help you. Thanks, Fred.

Jeff's bowtie's

11-13-2017 02:40 PM

Re: Parting out 67 C20, very well optioned.

Ok thanks anyway Fred

greywurm

11-14-2017 01:01 PM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by specialtyretail (Post 8079172)

Sorry, I did miss it. Let me check Saturday if that works for you. Thanks, Fred.

Just checking if you had a chance. Thanks.

specialtyretail

11-14-2017 03:37 PM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by greywurm (Post 8082255)

Just checking if you had a chance. Thanks.

I did, it does, now I just need to find my air chisel. Looks like it may be an issue getting to it, but I think i can get it done.

greywurm

11-14-2017 03:57 PM

Re: Parting out 67 C20, very well optioned.

Ok. Great. I'm not in a rush, just having a real hard time tracking that part down. Thanks again... I'll be patiently following the thread.

Never enough

11-15-2017 08:57 AM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by Never enough (Post 8077480)

C30 have fender emblems ?

Quote:

Originally Posted by specialtyretail (Post 8079646)

I am sorry. I have not been to the shop in daylight hours since Tuesday. I will look and get you some pics Saturday. Thanks, Fred.

Did you get time to look at these ?
Thanks

specialtyretail

11-15-2017 09:42 AM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by Never enough (Post 8082818)

Did you get time to look at these ?
Thanks

Yes, sorry, I dropped the ball on you on this. They are busted up and not much good. Thanks, Fred.

Never enough

11-15-2017 09:46 AM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by specialtyretail (Post 8082840)

Yes, sorry, I dropped the ball on you on this. They are busted up and not much good. Thanks, Fred.

OK, thanks for checking.

70STOVEBOLT

11-15-2017 12:31 PM

Re: Parting out 67 C20, very well optioned.

Fred did you find a parking brake cable guide?

Thanks
Mark

specialtyretail

11-15-2017 12:41 PM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by 70STOVEBOLT (Post 8082937)

Fred did you find a parking brake cable guide?

Thanks
Mark

Hey Mark, I did not. Sorry for not getting back with you. Thanks, Fred.

70STOVEBOLT

11-15-2017 03:24 PM

Re: Parting out 67 C20, very well optioned.

Fred, no problem. I will keep looking.

inline67c20

11-16-2017 04:46 AM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by specialtyretail (Post 8078167)

I have the heat shields listed here on the forum. I have not pulled the manifolds yet. How quickly are you needing them? Thanks, Fred.

Have you got to the manifolds yet?

specialtyretail

11-16-2017 08:49 AM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by inline67c20 (Post 8083514)

Have you got to the manifolds yet?

Hoping to Saturday if at all possible. Thanks, Fred.

Vero67

11-18-2017 01:27 AM

Re: Parting out 67 C20, very well optioned.

Looking an underdash harness, for gauges. My fusebox is pretty rusty. Thanks John

BLT gmc

11-18-2017 09:27 AM

Re: Parting out 67 C20, very well optioned.

Are the horn contact pieces and hardware available? Are they 67 correct? Extra tall horn cup?
Posted via Mobile Device

specialtyretail

11-18-2017 09:55 AM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by BLT gmc (Post 8085124)

Are the horn contact pieces and hardware available? Are they 67 correct? Extra tall horn cup?
Posted via Mobile Device

They are still in the steering wheel. i will try to get them removed this evening and have a pic or two for you. Thanks, Fred.

specialtyretail

11-18-2017 09:56 AM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by Vero67 (Post 8085054)

Looking an underdash harness, for gauges. My fusebox is pretty rusty. Thanks John

Hey John. Let me see what the 71 C30 has to offer. this harness was cut to pieces. If the weather cooperates, I will try to have some news for you this evening. Thanks, Fred.

Vero67

11-18-2017 10:31 AM

Re: Parting out 67 C20, very well optioned.

ok thank you

inline67c20

11-18-2017 04:52 PM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by specialtyretail (Post 8083559)

Hoping to Saturday if at all possible. Thanks, Fred.

Thanks Fred,I got the heat shields Thursday.

specialtyretail

11-18-2017 05:10 PM

Re: Parting out 67 C20, very well optioned.

3 Attachment(s)

Quote:

Originally Posted by BLT gmc (Post 8085124)

Are the horn contact pieces and hardware available? Are they 67 correct? Extra tall horn cup?
Posted via Mobile Device

SOLD,,,, THANKS.... Got them pulled. Yes, it appears to be the tall cup and they did come out of a 67 style steering wheel. If you can use them, $15.00 shipped for all of it. Thanks, Fred.

specialtyretail

11-18-2017 05:11 PM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by inline67c20 (Post 8085393)

Thanks Fred,I got the heat shields Thursday.

Good to hear. Thanks, Fred.

BLT gmc

11-18-2017 05:58 PM

Re: Parting out 67 C20, very well optioned.

I will take the horns parts for $15 shipped. Please PM me your address, I would like to send as MO. Bruce
Posted via Mobile Device

specialtyretail

11-18-2017 06:05 PM

Re: Parting out 67 C20, very well optioned.

1 Attachment(s)

Quote:

Originally Posted by BLT gmc (Post 8085421)

I will take the horns parts for $15 shipped. Please PM me your address, I would like to send as MO. Bruce
Posted via Mobile Device

Here you go Bruce. I will do a check if that is easier for you, not a problem. Thanks, Fred.

BLT gmc

11-20-2017 10:57 AM

Re: Parting out 67 C20, very well optioned.

Payment has been sent 11/20. Thank you, Bruce

Quote:

Originally Posted by specialtyretail (Post 8085397)

SOLD,,,, THANKS.... Got them pulled. Yes, it appears to be the tall cup and they did come out of a 67 style steering wheel. If you can use them, $15.00 shipped for all of it. Thanks, Fred.

TBohne

11-21-2017 10:04 AM

Re: Parting out 67 C20, very well optioned.

Looks like the interior vents for the a/c system are sold, what would you have to have for the rest of the a/c system shipped to 77830?

specialtyretail

11-21-2017 10:08 AM

Re: Parting out 67 C20, very well optioned.

Quote:

Originally Posted by TBohne (Post 8087095)

Looks like the interior vents for the a/c system are sold, what would you have to have for the rest of the a/c system shipped to 77830?

What all are you needing. I have the underdash components and the outer firewall box. I can get you pics this evening. Thanks, Fred.

All times are GMT -4. The time now is 01:29 AM.

Page 3 of 4

Show 40 post(s) from this thread on one page