Re: SPID Picture thread?
 

72 c10

Re: SPID Picture thread?
 

I wonder why somebody scratched the wheel base out?

Re: SPID Picture thread?
 

Good question. My first thought was it was a long bed scratched out. Per the model on the left it says 09 which indicates it is a long bed. although I see no evidence of a frame cut. Which leads me to possibly believe the cab was put on a factory swb, when it was restored a while back.

Maybe it was cut but I’m not seeing it correctly? Any thoughts on how I can confirm this was a cut long bed or a different swb frame. Any input would be appreciated, I’m new to the c10. Thanks.

Re: SPID Picture thread?
 

first thing, I would check the VIN on the frame for comparison to cab and title..

top of left frame rail forward of motor mount under alternator..

it's only the year, plant, and sequence number but should match or ???

https://dl.dropbox.com/s/ichd268s6nd...57126.jpg?dl=0

Re: SPID Picture thread?
 

72 Army Truck

Re: SPID Picture thread?
 

My 67. V8 vin with gauges and radio.

Re: SPID Picture thread?
 

Thanks for the info. I will check that out today when I’m home.

I think I know what I got. I believe the cab is a long box cab and the frame and bed are factory short, frame is not cut or anything. The cabs for long and short are the same correct? All of the options listed I have in the truck match the spid. coincidence Or what lol? I bet the builder scratched the wheelbase part out since the cab was put on the short box.

I’m speculating but it makes sense to me..

Re: SPID Picture thread?
 

I bought the burb on post 856

http://67-72chevytrucks.com/vboard/s...62#post8692462

A board member asked what the color was and I think it says special paint.

It also says consignee caution, and permanent anti something. Don't think Ive ever seen either of those before.

Any enlightenment from the spid guru's?

Re: SPID Picture thread?
 

Permanent anti freeze was common on government order vehicles which would explain the special paint also. Probably forestry or similar in that color. Good save!

Re: SPID Picture thread?
 

I don't get into the spids too much so I had no idea. Got any ideas on consignee caution?

Here is the vin if anyone is curious ... CCS162F121163

Re: SPID Picture thread?
 

bottom of left column 'GSA' is General Services Administration..

GSA handles most of the federal govt. non tactical fleet purchases that often have unique specs and placards..

could be placards for servicing, weight, tie down, lifting, speed, terrain, climate, NSN parts, etc.

the 72 Army truck above is a good example, specs vary per agency of course..

Re: SPID Picture thread?
 

Man your eyes are better than mine haha. I didn't even make out the GSA until you pointed it out.

Re: SPID Picture thread?
 

might find some paper safe cleaning products that would clean it up?

interesting for sure, be fun to learn its agency and history..

Re: SPID Picture thread?
 

It’s just a shell. Had no front end, no doors at all except the third door. No seats either. And thats the best I could get the spid to look in PS. Previous owner has purchased a few bits and pieces that I get with it.

Re: SPID Picture thread?
 

sorry, I meant to clean the spid, looks like paper without lamination?

maybe a way to clean the paper to see what all options were there and figure out the agency..

either way, looks like a good deal on parts.. is that a posi axle right column, second down? :)

Re: SPID Picture thread?
 

Sorry yeah I understood what you were saying. I should have started with the spid is ready to waste away to nothing and any kind of cleaning would just finish the job. I was just getting at there isn't anything else to go on where it may have come from. I did notice the interior seemed a little different shade of green than the exterior, so possibly a repaint? I was thinking maybe a little light sanding on the doors ... Ooops there are no doors lol.

I appreciate all our input and sleuthing abilities for sure.

Re: SPID Picture thread?
 

Former California ranch truck

Re: SPID Picture thread?
 

Still curious what 19B3?? Consignee Caution F is if anyone knows. Post #933

Re: SPID Picture thread?
 

I think the RPO code you're looking for is 3B?

like I mentioned before, the GSA vehicles often spec'd specific warnings and placards that would only appear on those vehicles and they don't appear in the 'regular' production code lists..

here is all I could find last time, might have to email one of the vendors that repop these to see if they have seen it before..

good luck!

https://www.crankshaftcoalition.com/...GM_master_list

B34 H.D. Front Floor Mat
B35 H.D. Rear Floor Mat
B37 Colored floor mats
B39 Load Floor Carpet

B30 2367 P FLC R COVERING FLOOR CARPET 910508 E T E A
B31 2368 P FLC R COVERING FLOOR VINYL, FRT, FULL WIDTH 980624 E T E A
B32 2369 P FMF R COVERING FRT FLOOR MATS, AUX 880729 E E E A
B33 2370 P FMR R COVERING REAR FLOOR MATS, AUX 880729 E E E A
B34 2371 P FMF R COVERING FRT FLOOR MATS, CARPETED INSERT 880729 E E E A
B35 2372 P FMR R COVERING REAR FLOOR MATS, CARPETED INSERT 900212 E E E A
B36 2373 P COVERING FLOOR MAT, LUGG COMPT 840223 E E E A
B37 2374 P COVERING FLOOR MAT, FRT & RR, AUX 970508 E E E A
B38 2375 P FLC R COVERING FLOOR VINYL, FRT & RR, FULL WIDTH 980624 E T E A
B39 2376 P COVERING FLOOR CARPET, LOAD FLOOR 830101 E E E A
B3D 2344 P EQUIPMENT SCHOOL BUS 860408 E T T A
B3E 2345 P NOISE CONTROL 80DB NOISE PASS-BY JURISDICTION 980618 P 1 1 A
B3H 2348 C COVERING FLOOR CARPET, LOAD FLOOR - DELETE 980618 E 1 1 A
B3J 2350 P EQUIPMENT DIESEL 860408 E T T A
B3L 2352 P TIR M TIRE ALL P155/80R13/N BL R/PE ST TL ALS 880411 P 1 1 A
B3M 2353 P EQUIPMENT SCHOOL BUS, DELUXE 860408 E T T A
B3N 2354 P COVERING FLOOR MAT, FRT & RR, AUX - NOT DESIRED 20205 E T E A

Re: SPID Picture thread?
 

Oh OK, now I understand what you meant. It just wasn't clicking (not uncommon haha).

I had a US Navy 57 sedan a million years ago and it had a brass placard with etched specifics on it like you mention. Must have been the consignee caution of its day.

Re: SPID Picture thread?
 

I bought this today. 67 1/2 ton 4x4 panel truck.
I think the panels were low production (Rare).
Rare does not equal desirable.
The bottom panels are really rough.


http://67-72chevytrucks.com/vboard/a...1&d=1585009716
http://67-72chevytrucks.com/vboard/a...1&d=1585009812

Re: SPID Picture thread?
 

Im not much good at decoding spids. I will say though that a lot of repair panels are now made for burbs and subs. Used to be you would have to make the truck pieces work. Rockers and a lot are interchangeable with the trucks though.

Re: SPID Picture thread?
 

Cool panel, looks like something that a MASH unit would use. Hopefully someone can save it. 6 cylinder?

Re: SPID Picture thread?
 

283ci

Re: SPID Picture thread?
 

front and rear posi :metal: