The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 4 of 8 123 4 5678
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   KY 67 SWB Part Out! (https://67-72chevytrucks.com/vboard/showthread.php?t=496553)

slick copper 01-13-2012 06:40 AM
Re: 67 SWB Part Out!
 
They're most likely not double hump heads. I remember the valves being wayyyy tooo small to be double humps. Could've been swapped out some time I guess though.

Delta9 01-13-2012 09:10 AM
Re: 67 SWB Part Out!
 
do you still have the complete front clip, as in fenders, hood, grill and core. also are they chevy and in good shape? how much would this run me if picked up?

slick copper 01-14-2012 08:18 AM
Re: 67 SWB Part Out!
 
The front clip is long gone man, sorry. It was the first thing to go before I even started this thread.

spyder4560 01-15-2012 01:27 PM
Re: 67 SWB Part Out!
 
Just wanted to wave a hand from Danville,Ky.Also would like to know if you plan on selling the frame complete or maybe part with the trailing arm setup.Whichever,could you price them both ways?I am only about an hour and a half away,so pickup should not be a problem if the price is right.:gmc2:

slick copper 01-16-2012 06:33 AM
Re: 67 SWB Part Out!
 
Hey! Wanted to keep the frame complete, but asking $600 and right now I'm offering what's left of the cab and bed in with it. I feel that's pretty fair deal for a short wheel base. Was it you that was asking about doors in a KY thread before? I got those too, maybe we can work out a deal on all of it.

spyder4560 01-16-2012 01:28 PM
Re: 67 SWB Part Out!
 
Thanks for the quick response.Would really like to talk about making this frame deal work out.My nephew has a '71 LWB that I would like to make into a SWB and if this frame(and any other parts)is in good shape we will definitely need to talk.Send me a PM with your phone number and let's see if we can get together on this deal.:gmc2:

spyder4560 01-22-2012 01:06 AM
Re: 67 SWB Part Out!
 
Slick copper,you need to clean out your PM storage.I couldn't leave you a PM.:gmc2:

slick copper 01-22-2012 04:25 AM
Re: 67 SWB Part Out!
 
DONE!! :D Sorry had sooo many from my high octane membership when it expired cut my available space down and made my box full! I've got it cleaned up and renewed my subscription/membership now so good to go!!

YunGunz 01-22-2012 03:57 PM
Re: 67 SWB Part Out!
 
Any luck/chance some of the bed supports are not rusted out?

slick copper 01-23-2012 05:49 AM
Re: 67 SWB Part Out!
 
2 Attachment(s)
Quote:
Originally Posted by YunGunz (Post 5138934)
Any luck/chance some of the bed supports are not rusted out?
Actually it's a good possibility. The inner fenders are solid, they're just a little beat up. Here's a couple undershots, not exact of bedrails but maybe give ya an idea of condition. Looks like some surface rust, maybe solid though. I'll have to take a closer look for ya when I go out there.
Attachment 860520Attachment 860521

slick copper 01-28-2012 05:38 AM
Re: 67 SWB Part Out!
 
2 Attachment(s)
For Heavy Metal Chevy. Here's where I'm looking for numbers man. Probably not the right spot. Let me know.
Attachment 862959

Attachment 862960

yellowGT 01-29-2012 09:40 PM
Re: 67 SWB Part Out!
 
ill give you $10 shipped for the wiper motor arms? let me know. Thx

slick copper 01-29-2012 11:47 PM
Re: 67 SWB Part Out!
 
How 'bout $15 (just cause shipping to TX $$)?

yellowGT 01-30-2012 01:40 AM
Re: 67 SWB Part Out!
 
just struck deal with teeitup on some...thanks though

angelo_32806 01-30-2012 10:36 AM
Re: 67 SWB Part Out!
 
Do you have a title
Lee

michael bustamante 01-30-2012 02:25 PM
Re: 67 SWB Part Out!
 
Did those cab corners ever sell?

Portmod7 01-30-2012 04:05 PM
Re: 67 SWB Part Out!
 
How about the bellhousing inspection cover? That's assuming it had a manual transmission with the stock bellhousing in it?

slick copper 02-01-2012 07:23 AM
Re: 67 SWB Part Out!
 
Quote:
Originally Posted by angelo_32806 (Post 5155231)
Do you have a title
Lee
No, sorry. Gone.

Quote:
Originally Posted by michael bustamante (Post 5155643)
Did those cab corners ever sell?
Nope, still got them both. No one ever followed through. Have rocker patch and both floor boards available too.

Quote:
Originally Posted by Portmod7 (Post 5155800)
How about the bellhousing inspection cover? That's assuming it had a manual transmission with the stock bellhousing in it?
You need one? I'd have to look. My '70 did have a manual tranny, not sure if the cover is still around.

C5Phil 02-01-2012 10:25 AM
Re: 67 SWB Part Out!
 
I know this is a long shot but I'm going to try... By chance would you still have/consider selling- a cut out patch from your cab -I need the piece that incorporates the gas filler neck behind the drivers door- if you could cut me a patch panel that runs from the trim line two inches above filler to about 10-12 inches below the filler (I don't need the door jamb- just to the edge of the jamb and to the back of the cab)) I'd be very appreciative-- I hope I'm describing it correctly but my cab - under Po- took a hit right under gas filler neck- PO bondo-ed the area and I'd like to repair it properly-- let me know- I know its a long shot-- Thanks- Phil H.

slick copper 02-03-2012 05:33 AM
Re: 67 SWB Part Out!
 
Quote:
Originally Posted by C5Phil (Post 5159550)
I know this is a long shot but I'm going to try... By chance would you still have/consider selling- a cut out patch from your cab -I need the piece that incorporates the gas filler neck behind the drivers door- if you could cut me a patch panel that runs from the trim line two inches above filler to about 10-12 inches below the filler (I don't need the door jamb- just to the edge of the jamb and to the back of the cab)) I'd be very appreciative-- I hope I'm describing it correctly but my cab - under Po- took a hit right under gas filler neck- PO bondo-ed the area and I'd like to repair it properly-- let me know- I know its a long shot-- Thanks- Phil H.
Hmm... I'll think about it. Actually, yeah I probably would really need the $ right now. How much would a man be willing to pay for that peice? I will need a little more description. A pic with the section outlined would be great. I know the area you're talking about. Might be able to work this out.

slick copper 02-03-2012 06:04 AM
Re: 67 SWB Part Out!
 
TTT!!!! PRICE CUTS GUYS!!! Check them out!! Please buy this leftover stuff so I can continue project Slick Copper! Heavy Metal Chevy I dropped the price on wheels/tires. And Spyder the frame price has dropped! Help me out guys!!

C5Phil 02-03-2012 10:16 AM
Re: 67 SWB Part Out!
 
1 Attachment(s)
This picture shows the patch area I need- do not need the door jamb side- Let me know what you want for it shipped to 14589 zip- looking for a good no rust/bondo piece- thanks in advance-Phil

slick copper 02-04-2012 05:14 AM
Re: 67 SWB Part Out!
 
Ok. My truck looks good and straight no bondo. Does have some light suface rust, nothing that wouldn't sand out. So from the body line down to about 14" below fuel opening (just to be safe) right? How far around the corner of the cab? Until it flattens out? Just wanna be sure before I go cuttin'. Gonna have to remove that old gas tank. I'm thinking including shipping $60. Seeing I'm gonna have to cut the cab, and everything. How's that sound?

C5Phil 02-04-2012 06:06 AM
Re: 67 SWB Part Out!
 
Sounds good- But better hold off cutting for a bit- another fellow- "oldchevyguy" has offered to cut up one of his cabs and I need to verify he got my message that I'm getting one from you- so wait till I hear from him please- sorry- don't want him cutting up a good cab for know reason- thanks - Phil

C5Phil 02-04-2012 10:23 AM
Re: 67 SWB Part Out!
 
Re: the cab patch- Looks like I'm all set with OldChevyGuy - but if you don't mind I'll keep you in mind in case the patch he sends doesn't fit my needs- thanks for you patience in this matter- Phil


All times are GMT -4. The time now is 03:30 PM.
Page 4 of 8 123 4 5678
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com