The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 4 of 4 123 4
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   parting out 1972 cheyenne super lwb (https://67-72chevytrucks.com/vboard/showthread.php?t=241760)

deer slayer 07-18-2007 04:01 PM
Re: parting out 1972 cheyenne super lwb
 
34669 for the evap cover

Robert Paul Thomas 07-19-2007 08:06 AM
Re: parting out 1972 cheyenne super lwb
 
If the A/C balls, housings, center vent and bolts are available I'll take them. Also, I'm converting my dash to A/C, so if you cut the dash out, I could use the three sections where the holes are plus two inches as a pattern on my dash, you would just have to ship those. I also need about three inches all around the right rear stake pocket. Last but not least, do you have a choke delete plate.
Thanks Rob

Down south truckin 07-19-2007 11:15 PM
Re: parting out 1972 cheyenne super lwb
 
Quote:
Originally Posted by dkooi (Post 2268647)
Any a/c brackets? Specifically the strap style bracket from the back of the compressor to the bracket on the manifold. If so, how much and shipping to 85225? Thanks in advance!
i would have to dig around and look but i probably don't have that bracket thanks Mike

Down south truckin 07-19-2007 11:19 PM
Re: parting out 1972 cheyenne super lwb
 
Quote:
Originally Posted by Robert Paul Thomas (Post 2269968)
If the A/C balls, housings, center vent and bolts are available I'll take them. Also, I'm converting my dash to A/C, so if you cut the dash out, I could use the three sections where the holes are plus two inches as a pattern on my dash, you would just have to ship those. I also need about three inches all around the right rear stake pocket. Last but not least, do you have a choke delete plate.
Thanks Rob
Rob i have some a/c vents it may take me a couple days to dig them up
no choke delete
the bed is hammered and has buttons screwed all the way around it
I'll dig up some a/c vents and get some pics this weekend thanks Mike

1970bowtie 07-20-2007 12:32 PM
Re: parting out 1972 cheyenne super lwb
 
ill take the tail light assemblies if they have the wiring,and arent missing any hardware
shipped to 75754

Down south truckin 07-21-2007 12:33 AM
Re: parting out 1972 cheyenne super lwb
 
Quote:
Originally Posted by 1970bowtie (Post 2271523)
ill take the tail light assemblies if they have the wiring,and arent missing any hardware
shipped to 75754
I'll try to get them out and snap some pictures in the morning (saturday) thanks Mike

Down south truckin 07-23-2007 12:41 AM
Re: parting out 1972 cheyenne super lwb
 
1 Attachment(s)
Quote:
Originally Posted by 1970bowtie (Post 2271523)
ill take the tail light assemblies if they have the wiring,and arent missing any hardware
shipped to 75754
here is a pic of the tailight assemblys the wiring was spliced for a trailer harness but you can have it the ends were ok just where it plugged into the frame was messed up $25 shipped to your door thanks Mike

Eddie47 07-23-2007 04:09 PM
Re: parting out 1972 cheyenne super lwb
 
If Power Booster Brackets are not sold would like price for them.
Eddie47
eddiesvette@zuko47.com


All times are GMT -4. The time now is 08:35 AM.
Page 4 of 4 123 4
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com