Re: parting out 1972 cheyenne super lwb
 

what diam. is the sway bar.. and how much are you asking??
i am interested pending the above

Re: parting out 1972 cheyenne super lwb
 

faribran it's a standard 1/2 ton sway bar i hav'nt measured but I'd say it is somewhere around 7/8-1 inch i can check for you it's $25 plus shipping thanks Mike

Re: parting out 1972 cheyenne super lwb
 

did someone get the high hump floor pan? if not i will give 50.00 shipped to oklahoma. let me know. thanks matt

Re: parting out 1972 cheyenne super lwb
 

I'll take the rear underbed splash shields if they are not rusted through. (The ones mounted to the bed cross sill behind the back tires.)
Shoot the price including shipping 91762.
Thanx
Dano

Re: parting out 1972 cheyenne super lwb
 

Down South, when you say the tailgate is hammered, how bad does that make it? Any pictures? I wasn't able to see them.

Re: parting out 1972 cheyenne super lwb
 

you still have the evap housing i just need the side with the vacum canister and the canister

Re: parting out 1972 cheyenne super lwb
 

any headliner trim?

Re: parting out 1972 cheyenne super lwb
 

I need a complete cable pedal assembly to swap into a 67. If still availible. How much . Thanks

Re: parting out 1972 cheyenne super lwb
 

10.5 stang give me your zip code
dano69c10 let me get a set off this weekend
conchise the gate is way to rough to use but I'll get some pics
deerslayer i know the side of the box is still there but I'll look for the can
ostenre i have several sets I'll get some pictures this weekend
oldsc10 I'll get it off this weekend


thanks for your patience guys i got alot going on right now

Mike

Re: parting out 1972 cheyenne super lwb
 

pedal assembly pics
tailgate pics
I'll get headliner and evap housing pics in the morning thanks

Re: parting out 1972 cheyenne super lwb
 

Down South, Thanks for the pictures. How much for the center one shipped to Missouri. Zip 63740. Thanks for your time. Chris

Re: parting out 1972 cheyenne super lwb
 

how about the air dash is it still there and is it cut shipping to 15010

Re: parting out 1972 cheyenne super lwb
 

Chris how does $30 shipped sound? let me know thanks Mike

Re: parting out 1972 cheyenne super lwb
 

Dano one is bent the other has rust i may have some laying around but i hav'nt been able to put my hands on them but I'll keep looking thanks for your patience Mike

Re: parting out 1972 cheyenne super lwb
 

1969bb the dash is still in it and good I've never cut one out before but will try to cut this one since the cab is shot i really don't know what there worth but I'll look into it or you could let me know what is a fair price to you it would be next weekend until i'll have time to cut it out let me know thanks Mike

Deerslayer here are the pics of the evap. housing I'll take $30 plus shipping for it and the canister give me your zip and i'll get a shipping quote thanks

otsenre here is a picture of some headliner trim that i found I'll take $50 for the best set $45 for the second best set and $35 for the third best set

Thanks Mike

Re: parting out 1972 cheyenne super lwb
 

I am interested in the right bed side how much? what condition is it in? Where are you? jhencley@hotmail.com

Re: parting out 1972 cheyenne super lwb
 

The bedsides are rough on this one! thanks, Mike

Re: parting out 1972 cheyenne super lwb
 

Did you ever get my PM regarding shipping on the high hump? I don't think I heard back from you. Let me know.
Shawn

Re: parting out 1972 cheyenne super lwb
 

bb hump sold still lots of good parts available i will be crushing this in a couple weeks! unless someone wants it!!!

Re: parting out 1972 cheyenne super lwb
 

Any a/c brackets? Specifically the strap style bracket from the back of the compressor to the bracket on the manifold. If so, how much and shipping to 85225? Thanks in advance!

Re: parting out 1972 cheyenne super lwb
 

34669 for the evap cover

Re: parting out 1972 cheyenne super lwb
 

If the A/C balls, housings, center vent and bolts are available I'll take them. Also, I'm converting my dash to A/C, so if you cut the dash out, I could use the three sections where the holes are plus two inches as a pattern on my dash, you would just have to ship those. I also need about three inches all around the right rear stake pocket. Last but not least, do you have a choke delete plate.
Thanks Rob

Re: parting out 1972 cheyenne super lwb
 

i would have to dig around and look but i probably don't have that bracket thanks Mike

Re: parting out 1972 cheyenne super lwb
 

Rob i have some a/c vents it may take me a couple days to dig them up
no choke delete
the bed is hammered and has buttons screwed all the way around it
I'll dig up some a/c vents and get some pics this weekend thanks Mike

Re: parting out 1972 cheyenne super lwb
 

ill take the tail light assemblies if they have the wiring,and arent missing any hardware
shipped to 75754