![]() |
Re: the remains form swap meet 67-72 truck parts
3 Attachment(s)
Cal, here is what I have, air cleaner and spacer is off a BB but are the same except you'll have to get a new rubber hose for spacer to go to PVC valve. Also on the spare tire holder, I have the nut but no bolts
|
Re: the remains form swap meet 67-72 truck parts
Got any horns? High and low note please.
|
Re: the remains form swap meet 67-72 truck parts
ok, you got my message on the doors, the g/box for 2wd and pump& brackets for a small block, ok, the column from yhe s/wheel thru the firewall, don't need the signel handle.
|
Re: the remains form swap meet 67-72 truck parts
chevydogg66, sorry no horns
philB, I don't think you asked me about doors. PS stuff is for small block. I have columns, I'll get pics of best one, $70 shipped for one Thanks Randy |
Re: the remains form swap meet 67-72 truck parts
Hi Randy,
Do you have a window crank handle in good condition for a 67? I'm tired of these cheap repops leaving me with the knob in my hand and the window cranked half way up. :-) Thanks, -mike |
Re: the remains form swap meet 67-72 truck parts
Got any decent headlight bezels and light retainer rings for a 70 Chevy? price and shipping to 33578. Thank You
|
Re: the remains form swap meet 67-72 truck parts
Mike, I have a few 67 handles out there
jjzepplin, I have quite of few of the steel painted bezels out there and also the the rings for headlights, I will get pics tonight Thanks Randy |
Re: the remains form swap meet 67-72 truck parts
just waiting on your total on parts,.
|
Re: the remains form swap meet 67-72 truck parts
PhilB, it will be later today, I am at work right now. Thanks Randy
|
Re: the remains form swap meet 67-72 truck parts
3 Attachment(s)
PhilB, here is the box and pump with brackets, it will probably need new hoses. Also pics of steering column. $110 shipped for the ps stuff and $70 shipped for the column $180 total, are you needing the linkage for tranny to column, if so another $25. Here are pics. Thanks Randy
|
Re: the remains form swap meet 67-72 truck parts
3 Attachment(s)
more for him
|
Re: the remains form swap meet 67-72 truck parts
2 Attachment(s)
67 handles, have different knobs
|
Re: the remains form swap meet 67-72 truck parts
2 Attachment(s)
bezels and rings
|
Re: the remains form swap meet 67-72 truck parts
Price on rings as long as all tabs are present. 33578 zip. I was looking for aluminum bezels. I think they will fit right.?
|
Re: the remains form swap meet 67-72 truck parts
I have a buddy that has a big block truck 71-72 and needs a bracket that holds the power steering filler part to the inner fender wall He says they were separate parts. I asked another about one earlier and they were welded togather. I have not seen the part only what he described to me. Thanks!
|
Re: the remains form swap meet 67-72 truck parts
jjzepplin, I have the aluminum ones too, for a set of aluminum ones and rings $25 shipped for all 4
BigDon, 68-72 had a bracket weleded on the cannister, but 68 only have a additional bracket that monted on fender, sorry I don't have pic or one of those Thanks Randy |
Re: the remains form swap meet 67-72 truck parts
Hey Randy... I asked the other day if you have a set of the Bright headlight bezels... I need that set... do you have 2 sets?... I don't need the rings just the trim bezels...
|
Re: the remains form swap meet 67-72 truck parts
Dan, sorry I don't have any 67-68 aluminum bezels right now, only 69-72. Thanks Randy
|
Re: the remains form swap meet 67-72 truck parts
K... Thanks...
|
Re: the remains form swap meet 67-72 truck parts
pm me! OH I need one of those "t" thingys for an a/c truck that splits the two small hoses for the center vent. I am not sure what they are called. Big on one end and small on two..
|
Re: the remains form swap meet 67-72 truck parts
1 Attachment(s)
One of these $5 more
|
Re: the remains form swap meet 67-72 truck parts
I'm interested in a few things. If you could contact me at my email I would appreciate it. I can give you my phone number there if that's better. Thank you for your reply! cayce_brunswick@yahoo.com
Posted via Mobile Device |
Re: the remains form swap meet 67-72 truck parts
You can PM me through this site its the same as email. Thanks Randy
|
Re: the remains form swap meet 67-72 truck parts
I am looking for a good shift handle that has good chrome.....No peeling or pitting...Pic please if you have one and how much shipped to zip 32136? Thanks Projectjimmie
|
Re: the remains form swap meet 67-72 truck parts
Sorry all handles I have the chrome has wear or pitting on them. Thanks Randy
|
Re: the remains form swap meet 67-72 truck parts
Can you do a pic of the best one you have with out the pits? Thanks
|
Re: the remains form swap meet 67-72 truck parts
so $30 total right? 2 rings 2 bezels and one a/c duct separator?
|
Re: the remains form swap meet 67-72 truck parts
projectjimmie, yes I'll get pics tonight
jjzepplin, yes thats total, I'll pm info Thanks Randy |
Re: the remains form swap meet 67-72 truck parts
need a dash speaker and 2 front side reflectors, also do you have a grill shell for a 71?
|
Re: the remains form swap meet 67-72 truck parts
philB, I never heard back from you and I also PM'd you, are you wanting these parts?
Thanks Randy |
Re: the remains form swap meet 67-72 truck parts
Tx71smallBlock, I need to see if the other guy wants these speakers. On the side markers are you wanting plain or deluxe with chrome? I have a couple pretty good grills but I don't ship those, sorry
Thanks Randy |
Re: the remains form swap meet 67-72 truck parts
5 Attachment(s)
pics for Rickey, 2 small screw holes and scuff above them is the dent
|
Re: the remains form swap meet 67-72 truck parts
4 Attachment(s)
Pics for firemano64
I have this 72 style some flaking and one has extra screw holes, $25 plus shipping without woodgrain pieces |
Re: the remains form swap meet 67-72 truck parts
1 Attachment(s)
this set
|
Re: the remains form swap meet 67-72 truck parts
1 Attachment(s)
this se are metal 67-71 style with covers on them $20 plus shipping
|
Re: the remains form swap meet 67-72 truck parts
2 Attachment(s)
arm rests $10 s set
|
Re: the remains form swap meet 67-72 truck parts
1 Attachment(s)
This bezel only $10 plus shipping, left screw hole has a crack like most
|
Re: the remains form swap meet 67-72 truck parts
2 Attachment(s)
pics for TxRat, here ya go Shane
the cable has 2 war spots, but not into cable, still works fine |
Re: the remains form swap meet 67-72 truck parts
Quote:
|
Re: the remains form swap meet 67-72 truck parts
OK so I want the aluminum bezels (PIC?) And the retainer rings and divider for a/c but here's another request..I need a rag joint for p/s the larger one of the two.for 72box?
|
All times are GMT -4. The time now is 01:29 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com