i want my engine bay to look like this! any ideas?
 

yes, we've all seen it. the camaro concept. one of the things i find most striking is how clean the engine bay is. while it is a concept, it still looks very do-able.

any ideas or images anyone would like to share?

Re: i want my engine bay to look like this! any ideas?
 

our engine bays are simple like that, but there's no way anybody could replicate the looks of that.

Re: i want my engine bay to look like this! any ideas?
 

In all reality, on that Camaro concept the engine looks like it's just an LS2 with a cover on it. So anyone with an LSX or Gen III+ smallblock could slap that cover on (if/when it's available). The billet tower brace... Well we don't have shock towers like that. Hide wiring, relocate the battery, paint satin black, etc. If you have fab skills you could come pretty close.

I want my engine bay to look like this :metal: http://www.radrides.com/gallery/chicayne/6.jpg

Re: i want my engine bay to look like this! any ideas?
 

mmmm turbos

Re: i want my engine bay to look like this! any ideas?
 

imaginaton and fabrication skills is the key

Re: i want my engine bay to look like this! any ideas?
 

i noticed in the jegs catalog that they have a engine cover for the sbc.dont have a pic of it but it might be on there website

Re: i want my engine bay to look like this! any ideas?
 

or you can just put a cover over it like this
http://www.jegs.com/webapp/wcs/store...tegoryId=29203
http://www.jegs.com/images/photos/50...50060side2.jpg

Re: i want my engine bay to look like this! any ideas?
 

yall posted at the same time about the same thing. i personally think that's ugly. i'd take the valve cover covers and custom paint or pinstripe em.

Re: i want my engine bay to look like this! any ideas?
 

You can fabricate eng compartment covers :D

Re: i want my engine bay to look like this! any ideas?
 

fab skills a must, of course. on the camaro, it appears that the power steering pump is mounted high (great idea since you can more easily replace fluid.) has anyone done that before? custom brackets? i also dig the 'maro valve covers. would it be ok to put alt. elsewhere? also, a/c comes into play.

i'm thinking about all this 'cause i'm getting ready to do my own LS4 swap, and i'm trying to get ideas...

Re: i want my engine bay to look like this! any ideas?
 

that's ok, but they say it won't work for LS engines. i'd like to see the smooth valve covers for all that stuff on the LSX valve covers. something to clean up/cover all the wiring and stuff.

Re: i want my engine bay to look like this! any ideas?
 

My truck came stock with a engine compartment cover. Also known as...the hood. ;-)

Re: i want my engine bay to look like this! any ideas?
 

:lol: :lol: That's what I am talkin about!:metal:

Re: i want my engine bay to look like this! any ideas?
 

i did find these from an australian company for the LS engines in Chevys and Holdens. some better than others..

Re: i want my engine bay to look like this! any ideas?
 

and this. and Lingenfelter's got one too.

Re: i want my engine bay to look like this! any ideas?
 

Why not? Are you saying no one could replicate that exact look, or that concept?

I can think of a bunch of folks on this board with the skills to do that. May not be molded plastic (if thats what that is), but certainly could be done out of sheet metal. Definatley would take lots of time, planning, and surely a few mulligans!

Re: i want my engine bay to look like this! any ideas?
 

I've shaved the coilpack bosses off my LS1 valve covers and I'm having the holes tig'ed in (aluminum). Then I will polish them up. The coilpacks will be located under the dash with the plug wires passing through under the tunnel out of sight (on my 61). I can get away with that because the tunnel is sealed with panel below the torque tube.

Something similar could be done on a 67-72. The packs could be put anywhere you want. Just run longer wires.

Re: i want my engine bay to look like this! any ideas?
 

:agree: A cowl hood at that :hm:

Re: i want my engine bay to look like this! any ideas?
 

Everything is done in reverse though.

I don't see why you couldn't make on out of fiberglass to cover any engine,given enough time,and sandpaper.

Re: i want my engine bay to look like this! any ideas?
 

These are pretty cool
http://cgi.ebay.com/ebaymotors/Custo...QQcmdZViewItem
http://i1.ebayimg.com/01/i/07/30/27/96_1.JPG
http://i4.ebayimg.com/04/i/07/30/12/41_1.JPG
http://i14.ebayimg.com/05/i/06/25/d9/41_1.JPG
http://i13.ebayimg.com/05/i/06/25/fe/4b_1.JPG
http://i20.ebayimg.com/01/i/07/2a/91/9a_1.JPG

Re: i want my engine bay to look like this! any ideas?
 

I think this would be the best looking engine cover right here :)
http://superchargeronline.com/images...edcorvette.gif
and I like the look of the MSD coil packs myself.. I wouldnt want to cover them up
http://www.sdpc2000.com/images/produ...91_2601698.jpg

Re: i want my engine bay to look like this! any ideas?
 

now you got me looking at LS1's lol
found this one, im sure you already seen it. but it covers the intake and the throttle body
http://www.lingenfelter.com/Merchant...ges/8545wb.jpg
http://www.lingenfelter.com/store/ln0431.html

Re: i want my engine bay to look like this! any ideas?
 

Stay tuned! Can we say Lemon Drop;)

Kevin
LFD Inc.

Re: i want my engine bay to look like this! any ideas?
 

Are the engines so ugly now they have to fab plastic covers to hide them? Well, yeah, they are. While I have grown tired of the term old school , I guess you can call me old school since I still like the way they used to be with aluminum and chrome topside. we don't need no stinkin engine covers...:lol:

Re: i want my engine bay to look like this! any ideas?
 

Just a little bit of cover up can go a long way....

Re: i want my engine bay to look like this! any ideas?
 

Ken, well, it does still resemble our beloved small block since the valve covers are still visible ya know. ;)

Re: i want my engine bay to look like this! any ideas?
 

Me to :metal:

Re: i want my engine bay to look like this! any ideas?
 

i have to agree with boog on this one. if i want a bunch of plastic covers and crap covering up my engine compartment i will just buy a late model vehicle. i like a little bit of chrome and some nice paint and detailing.

Re: i want my engine bay to look like this! any ideas?
 

This one is the best, dual superchargers.

Re: i want my engine bay to look like this! any ideas?
 

don't mistake the point. the reason i like it doesn't have anything to do with plastic or aluminum or whatever material you eye zooms in on. it's the appearance. the cleanliness. the simplicity. the rationale being that this chiseled, muscular form boldly hints at an extremely complex mechanical subsurface, yet isn't so presumptuously bragging as to show off all its bits. it's more of a deep growl than it is an all-out bark. just enough to show a few teeth. that's why i like it.

Re: i want my engine bay to look like this! any ideas?
 

Call Troy Trepanier, I am sure he could muscle something up for you.

Re: i want my engine bay to look like this! any ideas?
 

Get a new car buddy...

Re: i want my engine bay to look like this! any ideas?
 

Interesting...how would that match up with the exterior of one of these trucks...it would have to be shaved clean and very modern as well to retain the theme. Go for it!

Re: i want my engine bay to look like this! any ideas?
 

chrome dont get u home