WTB Kick panel
 

Need the kick panel with the vent cut out of a cab. I am working on a 67 but 67/72 should work

Re: WTB Kick panel
 

Which side, left or right or both? How much of the kick panel around the vent do you need and do you need the vent and handle with rod? Is this for a non AC cab?

Re: WTB Kick panel
 

I need the left side and it is non Ac cab I need vent and rod with handle . I need the whole panel and a bout 6 inches up in the inter cowl

Re: WTB Kick panel
 

ttt

Re: WTB Kick panel
 

I will let you know on Monday if I can help you.

Thank you,
Tom

Re: WTB Kick panel
 

Scrapping this blazer is this what you are looking for? I should have a vent and handle for this also.

Re: WTB Kick panel
 

Just want to make sure we are on the same page before quoting a price

Re: WTB Kick panel
 

Yes but I need it to go up to it tie in to the inter cowl how much shipped to Bartley wva 24813

Re: WTB Kick panel
 

I will do 50 for the panel plus actual shipping which I will not know until I get it out and weight it. Looking at the picture it looks pretty rusted in the bottom of the vent opening let me check that tonight and make sure it is ok.

Re: WTB Kick panel
 

Ok let me know

Re: WTB Kick panel
 

Sorry the bottom is completely gone that is a shame the rest is in decent shape even at the floor board.

Re: WTB Kick panel
 

Ok thanks

Re: WTB Kick panel
 

I am still searching for you. It is tough to find this peace that is solid on the bottom. If it is solid, the rest of the cab is good enough to sell as a whole.

I will be working on a 72 tomorrow that I can check on.

Thank you,
Tom

Re: WTB Kick panel
 

Ok thank you very much I do appreate you taking the time to help me!

Re: WTB Kick panel
 

ttt

Re: WTB Kick panel
 

Fyi the knob on a 67 vent is one year only i think

Re: WTB Kick panel
 

Sorry but everything I have looked at so far is rotted pretty bad on the bottom. I am still looking for you.

Take care,
Tom

Re: WTB Kick panel
 

Ok thanks

Re: WTB Kick panel
 

ttt

Re: WTB Kick panel
 

Forgot about this one the bottom is not bad but will need a little work. I sold the windshield frame a couple of month ago. L.et me know if this will work for you

Re: WTB Kick panel
 

I can remove the ebrake pedal and get a better picture if you need it

Re: WTB Kick panel
 

It look a lot better than mine how much shipped to 11lancaster dr Bartley wv 24813

Re: WTB Kick panel
 

I don't have a clue how much it will weigh until I get it cut out. I would think that it would not be more than 20 dollars as close as you live so 50 for the panel and 20 to ship. If it is least then that once I cut it out I will charge actual shipping if it is over 20 I will eat it does that sound fair. So I guess what I am saying is 70 shipped at the most maybe less if the shipping is under 20.

Re: WTB Kick panel
 

Ok send me the info and I will send payment

Re: WTB Kick panel
 

Let me get it cut off and then I will let you know

Re: WTB Kick panel
 

Ok

Re: WTB Kick panel
 

Give me a couple of days to get it cutoff should be done by the weekend.

Re: WTB Kick panel
 

Bad news I cut on the wrong side of the pinch mold for about 15 inches. I took pictures to show you want to know if you are still interested before I finish processing. Basically I cut of the lip that gets spot welded on, I could cut that off and send with it I used a sawzall so minimal material removed. You call let me know if still interested. Added some other pictures now that it is easy to see cut out. Sorry apparently I was not paying attention when I cut.

Re: WTB Kick panel
 

last 2

Re: WTB Kick panel
 

That will be ok I can make it work

Re: WTB Kick panel
 

Pm info and price and I will pay you

Re: WTB Kick panel
 

PM sent it was over 20 to ship actually a little over 30 so 70 is the total. Do you need that much of the cowl if so no big deal just figured it would make it easier to find a box if a little smaller.

Re: WTB Kick panel
 

here`s one that I have. I`ll cut the a piller off at the bottom of the windshield area

Re: WTB Kick panel
 

windshield lip

Re: WTB Kick panel
 

This is what I need

Re: WTB Kick panel
 

Here is how I cut them off maybe not correct to what you need hopefully these pictures will help