WTB Traclock or Powerlock carrier for Dana 60
 

Im looking for a Posi for the rear of my Dana 60. I know I can buy a new one for $450. Im just looking to see if someone has a good one collecting dust and isn't planning on using it. I have 411 gears. Not sure what stock axle is 30 spline?? Its a 71 GMC C20 suburban

Re: WTB Traclock or Powerlock carrier for Dana 60
 

I got mine here off the board for 200. So hopefully someone has one for ya. I got the powerlok in my 71 n 72 gmcs and love it

Re: WTB Traclock or Powerlock carrier for Dana 60
 

I have a good one! I will look in the AM, but I think it has new posi clutch dic plates! I will PM with price and info. Thanks, Dan

Re: WTB Traclock or Powerlock carrier for Dana 60
 

Never thought of getting one off here...I need one for my...cough...Dodge Dart! Next in line if anyone has another for sale, after OP of course.

Re: WTB Traclock or Powerlock carrier for Dana 60
 

i have one or the other i bought off here, and not going to use. but i have 354 ratio and was bought for the swap out. not sure on carrier compatibility. i will figure it out today, i have about 200.00 in this

Re: WTB Traclock or Powerlock carrier for Dana 60
 

This unit is 30 spline and is good for 3:54 to 4:11 gears. As the pics show, it has all new internal gears and clutch plates. I collected parts and built it for my 72 Custom Camper with Dana 60 and just recently sold it. Obviously, I have more than the $325 plus shipping that I need for it. LMK Thanks, Dan

Re: WTB Traclock or Powerlock carrier for Dana 60
 

GMC 2500 4x4 Let me know
W314Speed 31 spline axles? I havnt heard of that spline count yet. Just from reading I have heard that they could be low count splines like 16 up to 30 spline. Ill have to pull my axle to find out for sure.

Re: WTB Traclock or Powerlock carrier for Dana 60
 

Sorry! Going back to my 31 spline 67-68 442 performance axles. You are correct at 30 spline for the Dana 60. Thanks, Dan

Re: WTB Traclock or Powerlock carrier for Dana 60
 

The factory dana 60 in our trucks should have 30 spline axles, at least in 71/72

Re: WTB Traclock or Powerlock carrier for Dana 60
 

Well what I have ain't turning. And I don't have 200 in this. I paid 75.00 from Dan. Don't know if it seized or what. It would need gone thru. So no guarantees

Re: WTB Traclock or Powerlock carrier for Dana 60
 

Any pics? Do you have 354 gears as well? What else comes with it?

Re: WTB Traclock or Powerlock carrier for Dana 60
 

this is what i have, no gears. 10/19/71, spicer#27161x

Re: WTB Traclock or Powerlock carrier for Dana 60
 

Ok so the spiders are seized. What do you want for it.

Re: WTB Traclock or Powerlock carrier for Dana 60
 

what i paid, 75.00 and shipping

Re: WTB Traclock or Powerlock carrier for Dana 60
 

The spiders probably aren't seized. I don't think the True-Trac is buildable, from what I understand. There is a lot of pressure on the side gears from the wave spring plates, so it would be hard to turn unless totally worn out. Once installed and used some to get the lube through the center working parts should be fine. I have two more for anyone that might be interested, after GMC 2500 4X4 sells his! I also have 3:54 ring and pinions. Thanks, Dan

Re: WTB Traclock or Powerlock carrier for Dana 60
 

I'm interested, what do you have and how much?

Re: WTB Traclock or Powerlock carrier for Dana 60
 

You ever come towards Syracuse? I'll think on it tomorrow. I have to research the true track.
Dan how much for ring and pinion. They are used correct?

Re: WTB Traclock or Powerlock carrier for Dana 60
 

They are used. $125 plus shipping and paypal fees or MO fine. LMK Thanks, Dan

Re: WTB Traclock or Powerlock carrier for Dana 60
 

Let JUDDSS and Paul finalize there deal. I sold Paul the best one I had, so if still available, don't pass on his. Thanks, Dan

Re: WTB Traclock or Powerlock carrier for Dana 60
 

thanx dan, i know nothing on these. its a good price if ya want oem

Re: WTB Traclock or Powerlock carrier for Dana 60
 

Thanks Dan and Paul. I plan on maybe putting down 625 Hp with my supercharged Ls motor. I just want to see what one will handle the power. What do you think Dan? You seem very knowledgeable on these.

Re: WTB Traclock or Powerlock carrier for Dana 60
 

Paul ill take the true trac. Do you ever come towards Syracuse. I see your only a couple hours from me.
Dan who makes the true trac Detroit?

Re: WTB Traclock or Powerlock carrier for Dana 60
 

I don't know. I have tried to run the Cast #s, but find nothing concrete. I can assume that the true-trac is a Dana product for basic posi and the Power-Lok was an option that was specific to our trucks on the Spid Label. Maybe, some of our other board members have some input! LMK about the 3:54 gears. Thanks, Dan

Re: WTB Traclock or Powerlock carrier for Dana 60
 

Workin now, that is a spicer# on that unit. I give u more info when I get home. Pm your address so I can get a quote

Re: WTB Traclock or Powerlock carrier for Dana 60
 

check out this link: http://therangerstation.com/tech_lib...ana_axle.shtml

Re: WTB Traclock or Powerlock carrier for Dana 60
 

Ok I messeged you the info.

Re: WTB Traclock or Powerlock carrier for Dana 60
 

Looks like 23.00 shipping

Re: WTB Traclock or Powerlock carrier for Dana 60
 

Sounds good ill take it sir. Please message me your paypal info if that's how you would like to get paid.

Re: WTB Traclock or Powerlock carrier for Dana 60
 

Ill let you know on the 3:54 ring and pinion. I have to do some research and see if it will work for me because I tow as well. Any idea how the RPMS are on this with a th400 related to speed? I have a gear vendors overdrive I installed but it doesn't work. I have to send it in and get it rebuilt for $1100:devil:
So I was thinking of ditching it and installing these gears. I have a 454 big block now and may install my supercharged LS motor over the winter. The 4:11 gears in it now are 4k RPMS at 70 MPH

Re: WTB Traclock or Powerlock carrier for Dana 60
 

Money sent thanks!!!