What seats are in your truck??
 

Been wondering what seats some of you guys are using in your trucks. I know the original buckets are expensive. Trying to get some ideas on what looks good and comfortable. Anyone have any pics of yours?

I've got a set of buckets from a 2002 or 2003 izuzu rodeo in mine. they fit really well. Here's a pic.

http://67-72chevytrucks.com/vboard/a...&postid=597276

Since that pic I put the headrests back on and built a custom console that runs from the back of the cab and runs up into the dash.

I have some buckets out of a mid 80s Dodge Daytona. Got them at the salvage yard. They're ok, but I need to raise them up a little more to make them more comfortable. I also built a cusom center console with my floor shifter and a 10" sub in it.

i have some bench/bucket type seat now. I do not know what it came out of. I asked my friend from whom i got the truck and he cannot remember what they came out of. I like them just fine but i will probably go with some kind of regular bucket seats later on so i can put some kind of console between the seats.

http://members.tripod.com/bh_66/truck/truck04.jpg

Right now I have a set from a mid 80's Lebaron but will be swapping them out for the 99 Dodge Ram split bench seat I have :D

Mid-80s Daytona buckets from a U-Pull-It. Built bases out of 1" angle iron. Wish I had about an extra 6" in the back of the cab so I could lean the seats back a bit more....

Hmmmm...had a pic attached to the last reply, ISP glitched.

Heres the pic.....

I have the stock buckets in my truck. I think the price of new covers are a little high, but I guess hat is what I will have to pay to keep in stock. my 2 cents

Doug

I'm running a steel horse leather seat that I got off ebay

I have a set of 67 buckets that i was going to put in but the prices of the covers and foam are so much that i will probaly try to trade them for something else.

Z52 full foam bench seat, baby....ohhh yeah...feel the luxury...

actually, I like my stock bench...with torn vinyl, and a torn patch glued on the vinyl, and a torn seatcover, and a torn patch sewn onto the seatcover.

a stock bench here...eh

How do you like it??

There's one of them, That I'm looking at.. Can ya post any Pictures??

Thanks\\


I have a bench bucket from Erickson Seating, made by Arias.. Fold down Center back, with drink holders. The material, is garbage... And I paid a lot for it, not counting the shipping..

If I keep it, I'm going to have it recovered in Leather.

Ron

split bench out of a 93 1500

98 chevy 60/40 .

seats
 

I've got some 40/20/40 seats out of an early '90 chevy x-cab(so the seat will slide far enough forward for folks to get in the back of the blazer). This set has the fold-down console in the middle to allow more passengers or provide a place to put your elbow and drink. They fit very nice and don't interfere with the 4wd shifter. I can get a pic of them if you want, they are currently out while bodywork is being done.

Matthew

I have the stock bench seat with the super cheyenne cover

My blazer has mid 80 mini van bucket's not sure outta what kinda van though.. The 69 has a milk crate for a seat and the 72 don't have a seat yet,but the daytona seat's are looking damn nice maybe I will have to find a set..

I've got the same as Eddie, except not in quite as good shape :(

3 original stock bench seats..:D:D:D

stock full 89 chevy bench with 1x1 steel square tubing for a spacer under it

R1 Racing Seats with a 4 Point Harness

here is a catalog pic of the steel horse seat. I like it really well. To me the head rest are a little tall for our trucks so I took them off. Plus it lets me recline a little further back. I do not have the fuel tank inside the cab so I can't tell you how it is with it. Lists in the catalog for 995.00, install kit 60.00. Console lifts up for third seat. Under third seat is a storage compartment.

Thanks for all of the replys and pics!! Would the gas tank removed make that much more room? Would like a pic mkmiller if you have one.

Thanks again

i have a full bench out of an 88up gm truck

I've got a Choo Choo Customs seat. They're based in Iowa, where I bought my truck from. Very, very comfy.

Factory buckets and cup holder console in the 71 GMC

Factory bench now (have factory buckets and seatbelt holder console waiting for brackets) in the 72 Chevy.

Puttin' a ''forgive me please'' LOL!! '85 Ford bench that had 58k 2nd owner. A guy at work rolled it. Goes good with my paint inside. The best was the price $ 50.00!!!!:bowtie: :flag: :bowtie:

Well the HD truck will have a new 95 model 60/40 with fold down center console!
And my BB truck has a 93 model 60/40 seat!

Jeep grand cherokee, 96 i believe

Jeep grand cherokee 99 with a center console from a 1998 f*rd truck. And as soon as I get back I will have 2002 chevy seats fron and rear

I'm sitting in 1992 Acura Integra charcoal grey!
Drove right out the wreckers with em!
Ye Haaah!
:burnout:

MandarinSixSeven, How did you attach the Grand Cherokee seats? Looks like you have the original levers on the base.

I have a stock GM bench, re-covered in black vinyl. It is actually very comfortable...getting a bit sunk in on the driver's side from my fat a$$ though :D
Makes the truck comfy to ride in on long trips....unless it is hot....my back always gets soaked with sweat b/c the vinyl dosen't breate worth crap.

I plan to just get it re-covered with new foam and a black cloth seat cover eventually. It is just soo comfy and squishy.....not ultra-firm like most seats out of newer vehicles :bowtie:

http://members.tripod.com/bh_66/truck/truck04.jpg

Haha, you've got an Octopus on your seat! I've got one of those in my truck :)

I love bucket seats but I want to keep my truck as original as possible. To each his own though.

If you have your original bench seat you should definately hold onto it in case you change your mind. Or if you happen to sell it, having the original seat adds to the appeal.

Oops, I forgot to post a picture of my truck. I have the original bucket seats:

http://mysite.verizon.net/res1md1v/p...NT_1010044.jpg

Is the CB original ?

Just Kidding.

http://www.u.arizona.edu/~klane/AI/70GMC/interior2.jpg

Second-row out of a '99 Suburban. Still tilts forward, too. :) Nice and comfy.

Edit: And at $150, a lot cheaper than most options!

I've got Honda seats for sale in my signature. Can't ship though.