Need BBC pulley pictures
 

Can someone get me pictures of the pulley setup on a BBC with A/C and P/S. My truck did not have A/C originally, I added it. I need some clarification on how the belts and pulleys are configured. Thanks

I have one and can take some pic but the ac is no installed all the pulles are there tough

pic1

pic2

pic

pic

flip66, I have a few questions. Pictures are kinda are to make out.

How many grooves do you have on the crank shaft pulley? I thought there should be three.

Belts, should there be...?
One for the alternator, Going around the alternator, crank shaft and water pump.
One for the a/c going around the compressor, water pump and crank shaft.
One for p/s going around the p/s pump and crank shaft.

3 grooves on the crank. the 1 closest to the block is for the alternator, #2 is for the air conditioner, #3 is for the Power steering. 2 grooves on the water pump are for the alternator and the air conditioner. I will see if I have an old picture of my '72 setup.

here it is.

dwaite, My power steering pump has a two groove pulley on it, any idea why?

72 spec crank pulleys.... There are two, which stack on top of each other...

stacked...

power steering...

installed...

Not really sure. Is it original or did it come out of a recycle yard off a c40-60 where they used 2 belts.

Is kind of hard to see you are right about the way the belts go I do not have the ac belt on so the grove you see is were it is suppose to go,. I can get better pic if you need them


One for the alternator, Going around the alternator, crank shaft and water pump.

One for the a/c going around the compressor, water pump and crank shaft.

One for p/s going around the p/s pump and crank shaft.