A/C Firewall Template
 

I am adding A/C to my non A/C 72 cab. Does anyone know where I can get a template to make modes for mounting holes and heater core? Thanks, Mick

I made a "custom" one. I took a piece of paper and traced out the AC box. Then I traced out the non-ac firewall. Use the Heater hose hole as a point of reference - it is the same on both. Then make your own sheet metal piece to weld in place.

i have my truck torn apart and can get you some templates for an a/c truck

I NEED ONE, THANK YOU EJ

Here ya go maybe this will help ya..

I found the old post we circulated a while back...
Click here

I hope this helps.