The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   water neck probleme need help (https://67-72chevytrucks.com/vboard/showthread.php?t=101620)

1968GMC 04-25-2004 04:56 PM

water neck probleme need help
 
1 Attachment(s)
I mooved my water temp sencor to the top of my intake and the pin is slytaly higher than my water neck. Is there a spacer we can buy to raise the water neck? If not what else can I do? I dont want my sencor on my head. Can I put it on the water pump?

cableguy0 04-25-2004 04:57 PM

why dont you want it in the head??

1968GMC 04-25-2004 05:02 PM

because Mi guage alwaise read overheating and it wasnt + the wire was too close to the headder and Im wondering if thats why it was reading overheating. Basicaly I just want to try it there and see if it makes a diffrent, who knows maby my gage is fxxxed

Orange70chevy 04-25-2004 06:07 PM

Maybe you could put a straight water neck on it?

cdowns 04-25-2004 06:51 PM

if you must have the sending unit there you can get a swivel thermo housing to give the needed clearance most good autoparts store will carry it


All times are GMT -4. The time now is 06:40 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com