The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   69 C10 For Sale (https://67-72chevytrucks.com/vboard/showthread.php?t=103215)

5150 05-06-2004 03:58 PM

69 C10 For Sale
 
I have a 69 C10 for sale. It has a 350/350, AT, Black interior, Alpine CD Player, Bright Yellow, Also has A/C capabilities but no compressor. I'll have to email pictures to you. For some reason it won't let me post them here.

Asking $4000

Thanks,

Bryan

BIG ORANGE 05-06-2004 06:34 PM

Where ya from????????

5150 05-07-2004 02:45 AM

5 Attachment(s)
White House, TN it's about 15 minutes north of Nashville.

HERE ARE THE PICTURES I FINALLY FIGURED IT OUT!

Bryan

charles oliver 05-07-2004 10:23 AM

69 C10
 
Can you give a little more details. I have a guy flying in from California to buy my Camaro tomororw morning.

Is there any rust anywhere Rockers cab corners etc. Any putry, Bondo, anywhere.
How does it run ? Would it make it from Nashville to Cinti ?
Thanks
Charlie

you can email me direct if you like.



Quote:

Originally Posted by yellow69
White House, TN it's about 15 minutes north of Nashville.

HERE ARE THE PICTURES I FINALLY FIGURED IT OUT!

Bryan


5150 05-07-2004 02:00 PM

There is a little bit of rust in the front corners of both doors, but I think its minimal. I do think there is a little bit of bondo on the rear cab corners. The floor pans were new when I bought it (July 2002). The wood bed was new, they did not do a good job with the metal strips though, they have some surface rust on them. They apparently tried to paint them yellow also, but most of it has all flaked off. It runs strong. I believe the timing is off just a bit I fooled with it a few weeks ago. It has been garage kept for almost a year now. I just put a set of drop springs on it, but its hard to tell unless you saw what it looked like before. The only bad spot of rust that I know of is under the battery on the fender well. I believe it would make it to Cincy. The only thing it needs is a balance and rotate job. The wheel weights that they stick on must have fallen off.

Thanks,

Bryan

5150 05-09-2004 06:12 AM

any other questions?

5150 05-12-2004 07:39 PM

still have it!

5150 05-20-2004 07:23 PM

bumpbumpbump

5150 06-23-2004 10:26 AM

I'm still for sale, and my wife is still pregnant!
 
I'm still for sale, and my wife is still pregnant!

Bryan


All times are GMT -4. The time now is 03:55 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com