The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Need bolt lengths for BB exhaust manifolds. (https://67-72chevytrucks.com/vboard/showthread.php?t=117360)

da-burb 08-27-2004 10:23 AM

Need bolt lengths for BB exhaust manifolds.
 
Does anyone have the bolt lengths for the stock cast iron exhaust manifolds for a big block? (w/o A/C) The ones on my C-30 are so rusted and rounded over. It is time to replace them. thanks

Tx Firefighter 08-27-2004 02:00 PM

Mine were 1 1/8 inches long stock, but I couldn't find them that length, so I used 1 1/4 with a washer under each one.

da-burb 08-27-2004 06:03 PM

I pulled one tonight when I got home. Mine was 1-1/4 and didn't use a washer. I measured the depth and it looks like it would be safe to almost 1-1/2. Atleast on the first bolt hole. Time to order an extra set of ARP BB intake bolts since they are the right size and length @ 3/8-16 x 1-1/4" for the exhaust manifolds too. Thanks TX.


All times are GMT -4. The time now is 01:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com