Truck weights
 

What does your truck weigh ?? Not what the Title says, but it's actual weight..

And with the weight, what is it, IE: short step, short wide, long box etc..

My 69 SWB GMC, fleet side small block Th350, coi8l rear, with alluminum wheels, intake, and headers came in at 3900 and some chainge. This was with no spare, but a small tool box and normal minimal junk. I have a pic of the ticket on another computer...but not this one.

Mine's a C/20 long fleetside, has 15" steel wagon wheels and 31's, weighs a little over 5000lbs with a full tank, spare, and hi-lift jack.

71 shortbed/stepside. 250-6 with tremec 3550 5-speed. 3780lbs. with 200lb me and half tank of gas.

I took this pic while sitting in my truck. 70' LWB, bed mat, 3/4 tank of gas and me(225) :D

K20, LWB, spare tire, 3 gas tanks but I can't recall how much fuel at the time - 5300#.

It was 11,300# before I unloaded the dirt...

3660 No spare alum wheels and thats As A SWB Back when my truck was a LWB It wieghed 3700 even.

Crap, gotta get down to 3,000. There goes the Dynamat.

SB th350 LWB alluminum wheels no spare 3/4 tank and me(160 at the time, 190 now) 3900lbs

I knew they were around 4000 pounds, some of you have some great lower weight...

I weighed mine 14 or 15 years ago and it was a sort step, roll bar, front pre runner bar, 5 off road lights on top and 4 on the front bar, SmittyBuilt 3" double tube rear bumper, two High Lifts, ETC. and it was in the 4600 Lb. area.

I was curious to get an idea of what it might be now that it's lowered with all of the pre-runner stuff and off road stuff gone.

Before the 454, with the 307 and me in the truck it was about 5,700.

3/4 Tons are heavy My 85 wieghed over 6000 with a 454 it now wieghs 5800 with a small block But i carry around a ton of chains and a jack tools stuff like that.

My longhorn tips the scales right @ 4240, with about 1/2 tank fuel, & my 220 lb @ss.....the old truck is pretty stripped tho! I run no air or heat, minus front bumper, & inner fenders, Jazz plastic buckets, alum heads & intake on the SB chev, She is rolling on 1/2 ton suspension......& no door glass. The things we do for fun :crazy: the old truck runs pretty good(for a sled)! crazyL :burnout:

less than my 3800 lb Delta 88...

67 LWB fleet, 250 3 spd...

Finally weighed my truck yesterday 10/23. It weighed 3900. SWB, iron head 350, tremec 5 spd, spare tire, small tool set, my 260lb a$$ and some misc. junk. I was surprised. I weighed my '98 ss camaro at the Motorplex and it was 3660lb. Not that much difference in imo.

68LSS1, Why do you need to get down to 3000 lbs?

Hey, my '99 suburban weighs just over 8400lbs, does that count?

With my 230-240lb butt in the driver's seat, a half-tank of gas, trailer hitch, '99 Suburban bench, headers, Vortec heads, aluminum intake, 700R4 tranny, and new carpet, right about 4250lb.

I hope to cut that by a good amount with the LS1/4L60E...going from an iron block with iron heads and an aluminum intake to an aluminum block with aluminum heads and a composite intake should do that. ;)