|
New to the Board
Hello Everyone:
I'm new to the board but I'm not new to these trucks. Back in high school I had a job at a gas station as an attendant/light mechanic. The man that owned the station was a 72 Chevy truck nut. He owned a 6cyl step side, blue/white/blue Cheyenne Super, red/white/red Cheyenne, and a K-5 Blazer. Being around those trucks and helping him maintain them became an addiction for me. Ever since graduating from college I had been the hunt for one but I was holding out for something special. After several near misses looking for the right truck I was about to give up when he contacted me about his latest project that he couldn't finish. It was the 72 2WD Blazer in my sig. I couldn't pass it up and I've had it for almost a year now. I absolutely love this truck and it is my daily driver. Here's a link to pics and info listed on Josh's site. Some of the info needs updating but my sig is correct. http://67-72chevytrucks.com/cc1972_39.html ------------------ 1972 Chevy Blazer 2WD - 400 SBC, bored, ported/polished heads, 9.5:1 dished pistons, Lunati 480/292 cam, electronic ignition, Edlebrock Performer intake, tricked out Rochester 850CFM Quadrajet, long tube headers, Flowmaster 40's, TH350-C with lock-up switch, 2800 rpm stall, shift kit, custom driveshaft, stock GM 12- bolt rear with Auburn Pro Series limited slip 3.73's, 2" drop spindles, 2" drop rear coils, track bar kit, front/rear stabilizers. 1999 30th Anniversary Trans-Am Coupe #1494 - M6, Flow-tech cut-out, Flowmaster, free mods. One of 292 coupes with M6 and in-dash CD. |
Howdy BigDave! Nice ride. Very nice. I bet its fun as hell cruising in that thing!
------------------ '69 3/4 ton C20 2wd w/ 350ci/400THM and a wood bed! '69 3/4 ton Custom 20 2wd w/ ORIGINAL 350ci/4sp Manual and a wood bed (parts beast). Seattle, WA. *See pics of my trucks and project at www.webshots.com! |
sweet blazer! by the looks of the pics I take it your not a gas station attendant anymore. lol
|
WELCOME! http://67-72chevytrucks.com/board/ubbhtml/smile.gif
Nice ride. Reid ------------------ Sylvan Lake, Alberta, Canada 1970 Chevy C20 Custom Camper #s matching 402BB Turbo 400 trans. Air conditioning, power steering, manual brakes. 73,600 Original Miles!! (Add on 2000 more from raod trip!) |
Welcome to the board!!!
Very nice Blazer!!!! ------------------
http://communities.msn.com/196772ChevyTrucks Vermilion, Ohio |
Sweet ride! love those rims! I too hope to own a 2wd blazer someday...
------------------ 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE with built 350 4-speed 4.11's and posi |
Welcome from Connecticut!
------------------ 1971 C10 swb stepside 350/700R4/3.73posi Killingworth, Connecticut |
welcome from iowa
|
A Big Tennessee Howdy-Do!!!!!!!!!!!
------------------ 67 GMC Stepside(UNDER CONSTRUCTION) 67 GMC Custom 67 Chevy C-30 |
Welcome to the board ENJOY.
------------------ BIG ORANGE 1971 SUBURBAN 1970/90-Little Buck's Truck (ONE DAY) USED TRUCK PARTS 4 SALE |
Welcome from Seattle, BigDave! Your Blazer is one special truck! BEEEAUUUUTIFUUUUULLLL! We all hope you will bestow some of truck wisdom on those of us that have not had as many years working on these classics! As they say around the links....You da man!
------------------ If it weren't for all the mistakes I made...this would be a part time job! |
WOW!!!!! And welcome to *****THE***** Board!! From Central Ca
------------------ ------------------------- SILLY BOYZ......TRUCK ARE FOR GURLZ !! "A GIRL and her TRUCK....its a BEAUTIFUL thing..." Instant msgr, AOL=GMCjunkie67 MSN=GMCjunkie71 Yahoo=mooomom2 |
Sweet blazer!!! Welcome to the best board around.
|
http://67-72chevytrucks.com/72_39_1.jpg
nice rig...d@mn nice. ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite. If you need a pic posted, E-mail me at longhornmail@yahoo.com Andy, in Columbus Ohio |
Nice Blazer!! Welcome from Indiana
|
killer stance dude! you've done a great job on the 'blaze ! impart some 'o that wisdom w/ us once in a while. hope you enjoy the board like i do!
------------------ '68 swb 350/350 w/edelbrock toal perf.pkg.headers,flowmstrs.no rust of the mid-west on this one! |
Im also new to the board and its great.
I think you are going to enjoy it. |
Welcome to "The Addiction"! Nice Blazer!
|
NICE RIDE! And welcome A BOARD!! http://67-72chevytrucks.com/board/ubbhtml/wink.gif
------------------[*]'71 Cheyenne, 402BB[*]Winfield, KS[*] http://barn9.freeservers.com[*] steer50@hotmail.com |
sweet ride, welcome from Nebraska
------------------ '72 Chevy 1/2T 4x4 shortbox stepside 350/350auto on '84 ralleys and 31/10.5s 67 Cutlass convertible 330, 3spd stick 90 GMC Jimmy 350/auto Chad Stephens Orleans,NE |
Welcome to the boards.
|
Nice truck!
Welcome to the board from Wellington, Missouri. ------------------ Nick Rodenberg Wellington, MO http://nickrod.port5.com You can click on "My 72 Chevy Truck" I have a 72 Cheyenne 10 with a V8 350 and a TH-350 auto-tranny. White/Ochre/White Runs well... working on body. Hoping to have completed in March when I turn 16 |
Welcome! Now that you're here, you'll never leave. http://67-72chevytrucks.com/board/ubbhtml/smile.gif
------------------
|
Thanks for all the compliments guys. I pretty much expected y'all to like the truck because we're all afflicted with the same illness.
Thanks again. ------------------ 1972 Chevy Blazer 2WD - 400 SBC, bored, ported/polished heads, 9.5:1 dished pistons, Lunati 480/292 cam, electronic ignition, Edlebrock Performer intake, tricked out Rochester 850CFM Quadrajet, long tube headers, Flowmaster 40's, TH350-C with lock-up switch, 2800 rpm stall, shift kit, custom driveshaft, stock GM 12- bolt rear with Auburn Pro Series limited slip 3.73's, 2" drop spindles, 2" drop rear coils, track bar kit, front/rear stabilizers. 1999 30th Anniversary Trans-Am Coupe #1494 - M6, Flow-tech cut-out, Flowmaster, free mods. One of 292 coupes with M6 and in-dash CD. |
Man that's nice!!!!!!!!
------------------ http://hometown.aol.com/racedvl/racedvl69index.html Woodstock,IL.northwest of Chicago It's not what you buy, it's what you build!! I did not climb to the top of the food chain, to become a vegetarian. For some pics of my truck. |
| All times are GMT -4. The time now is 11:00 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com