The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   Inner Fender (https://67-72chevytrucks.com/vboard/showthread.php?t=138842)

phanatic32212 02-02-2005 08:11 AM

Inner Fender
 
I need an inner fender (skirt?) for a 71 C-10. I need the passenger side. If anyone has one or can tell me where to get one, it would be greatly appreciated.

Thanks in Advance
Jake

dtlilly 02-02-2005 08:29 AM

Board member hotrodhenryj is fairly close to you, and usually has good rust free original metal laying around, give him a PM.

Tx Firefighter 02-02-2005 08:46 AM

A GM dealer can still get them, or any board advertiser will have them too.

67mbsc 02-02-2005 09:22 AM

Part Number(s)?
 
Does anybody know the part number(s) for the inner fenders? I can't find them on partsdirect without it!
Thanks

bestchevyfan 02-02-2005 01:34 PM

Parts
 
The Part Numbers -r. H. 3882650 L.h.- 6270855 Hope This Helps. Buddy

hilljob26 02-02-2005 08:32 PM

i have a good pass.side,it isn't exactly rust free,it doesn't show ruast,but the metal down by the radiator support feels thin,i would take 40 +the ride...mike

phanatic32212 02-04-2005 05:21 PM

thanks for all of the info guys. I ended up just ordering one from MotherTruckers. I wanted to buy from them originally but couldn't find it on there. I guess I was just blind. Thanks Again


All times are GMT -4. The time now is 07:39 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com