Anybody have a picture of........
 

Can somebody direct me to a picture of the top plate that holds the front leaf springs onto the axle please?? If there aren't any pics on the Board right now, could one of you members that has a 71/72 4x4 please snap a pic of this plate and post it so I can show another member what I'm looking for. He might have some of these laying around and I need two of them.

Thanks for your help on this,
72longbed

you see any in my signature link?

Jim,
the closest pic that shows a spring plate is a shot of the front of your suspension and the plate doesn't show up because the leaf spring blocks it out.

Maybe if you get a chance you can take a pic from above the plate and post it for me? If you can that would be great, if not thats OK.

Thanks,
72longbed

Have to do it tomorrow, it's raining now.

I think this is what your looking for.

You Da' Man!!
 

Blazerman,
thanks, thats the animal I need. I need left and right side if anybody out there has any. (Maybe they just rotate to fit either side, I don't know?)

Thanks Again,
72longbed

Still need a pair of these if anybody has them?

What years use the same as 71/72 4x4??

72longbed

Im not 100% sure but I think the only difference in the newer ones is the stabilizer bar mount. 73 and up.
Anybody else?

The other difference is the holes for the U-Bolts, Earlier Dana 44 axle tubes were 2 3/4" (1971 to 1975?) and the newer ones are 3"

Are these what you are looking for? Where are you from in pa. I am near Pittsburgh.

Jim,
yes those are the plates. I got a set from GM72K10 the other day and meant to update all of the Threads on the Board. I guess this one slipped by me. :o Thank you for looking, I'm in the southwest end of PA near Valley Forge.

Thanks,
72longbed