The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   What are you doing over your weekend?? (https://67-72chevytrucks.com/vboard/showthread.php?t=145423)

CHEVY & GMC FOREVER 03-12-2005 11:51 AM

What are you doing over your weekend??
 
I am doing nothing today, maybe I'll go check out the progress this engine builder has done on my engine tommorow.... but today there is nothing to do so I'll just R&R...... :metal: :b69:

CE20934 03-12-2005 12:08 PM

Motor City Tattoo Convention at the RenCen.

chip46wis 03-12-2005 01:02 PM

Taking the A-frames and steering off the 69 stepside---probably wont get the replacements off the 85 parts truck though----10 degrees outside---BBBRRRR

gabet40 03-12-2005 01:39 PM

rotate my wheels to find out where the pull is coming from, throw some blocks in the rear to level her out, readjust my steering column shifter, change the oil and plugs, do all the finishing touches to get her ready for the pismo beach sand dunes!

krue 03-12-2005 02:41 PM

Gotta work this weekend.

beagler 03-12-2005 03:14 PM

I'm gonna drive my truck and get some R&R

ChevyDude 03-12-2005 03:26 PM

Trying to get the wife to pose for some naked pics for the dark side!

TomShilling 03-12-2005 03:34 PM

That's a lot more fun than my tasks for the day!
 
I just installed a steering wheel for the 71 GMC, and EVERYTHING works! The horn, the turn signals, and they even cancel when they are supposed to! I should quit now while I am ahead...

But let us know how the pics turn out, ChevyDude!!

70 shorty 03-12-2005 03:43 PM

So far I've still been chasing little things on my truck that needed attention. Ive gotten the light bulb replaced for the high beam indicator, so that works, I replaced the turn signal cancel springs so now I won't look like an idiot riding down the road with my left turn signal on, and I got my Sun tach hooked up, just need to wire up the light for it (see my post about that).

71swb4x4 03-12-2005 03:48 PM

Heading to teeitup's, hopefully he doesn't talk me into too much stuff, I don't need to add a divroce to the cost of my parts :D

CHEVY & GMC FOREVER 03-12-2005 04:18 PM

Quote:

Originally Posted by 71swb4x4
Heading to teeitup's, hopefully he doesn't talk me into too much stuff, I don't need to add a divroce to the cost of my parts :D


I hear ya man my wifes doin' the same thing after almost 20 years of marriage :lol: :lol:

69ChevyLB 03-12-2005 05:07 PM

Doing nothing but R&R on weekends until the f**king weather warms up. I got lots of plans for the truck but can't do anything in the snow and cold temps.

rusted75 half ton 03-12-2005 05:24 PM

I think I got my truck fixed!!!!!
 
mabey it was just the fuel filter :crazy: ,gonna have someone follow me while I do a test drive later.

Drogster 03-12-2005 05:27 PM

Planning. Lots of planning.

We are moving from Alaska to Michigan in about 6 weeks, so we are busy getting ready for that.

PLUS - I'm planning what I want to do with my '68 C10 once I get it in Michigan!

CHEVY & GMC FOREVER 03-12-2005 05:36 PM

Quote:

Originally Posted by Drogster
Planning. Lots of planning.

We are moving from Alaska to Michigan in about 6 weeks, so we are busy getting ready for that.

PLUS - I'm planning what I want to do with my '68 C10 once I get it in Michigan!

Where in Michigan, What type of planning for the C-10?? :)

Drogster 03-12-2005 06:22 PM

Quote:

Originally Posted by CHEVY & GMC FOREVER
Where in Michigan, What type of planning for the C-10?? :)

Heading to Sault Ste. Marie - in the eastern U.P. Can't wait to get back to my home State!

Planning for the truck...I'm a big planner, I like to plan. I plan on planning everything. Reality is completely different from my plans, however...! :whine:

Anyhow...I'm just trying to come up with a "final" look, stance, color, engine, etc, that I want the truck look like. With gas prices as they are, I think the BB option is out...time for a stroker small block! :)

CHEVY & GMC FOREVER 03-12-2005 06:54 PM

Quote:

Originally Posted by Drogster
Heading to Sault Ste. Marie - in the eastern U.P. Can't wait to get back to my home State!

Planning for the truck...I'm a big planner, I like to plan. I plan on planning everything. Reality is completely different from my plans, however...! :whine:

Anyhow...I'm just trying to come up with a "final" look, stance, color, engine, etc, that I want the truck look like. With gas prices as they are, I think the BB option is out...time for a stroker small block! :)

Sounds good.. :)

Brainchild 03-12-2005 07:28 PM

I was going to tinker in the shop,but got to swap out the sofa,and recliner,and rearrange the living room,YUK!

I'm going to go dump oil in the floor of trhe shop,and clean it up.At least it'll look like I was out there:lol:

shifty 03-12-2005 07:54 PM

Replacing the original motor in my truck so it can be rebuilt. Hoping to finish tomorrow and have it running by dusk :)

Let's see if it happens!

Want to change the gear in my tranny associated with teh speedometer and find out why my left front blinker ain't working (but the rear does :confused: )

onetoncrewcab 03-12-2005 07:57 PM

Working. :( Guard drill weekend. :(
Oops. They are not Guard Drills anymore. They are called Battle Assemblies. :rolleyes:
Mike

inline6Bill 03-12-2005 08:04 PM

Saturday: work on getting a good buzz :b69:

Sunday: Remember why i hate hangovers :ele:

Palf70Step 03-12-2005 08:21 PM

I wave at Krue's area twice driving to and from north Mississippiyesterday and today. Other than chaufering the daughter, my weekend is a bust.

longhorn71 03-12-2005 11:15 PM

I worked Saterday moring.I am on call for sunday.If i have no job up i am gonna pull the 70 parts truck to peices

Brainchild 03-12-2005 11:38 PM

All furniture in it's rightful position,and I managed to build a stand for my bench grinder to clear some room on the bench.
Tomorrow hopefully I can spend the day in the shop.

dyingdeadman 03-13-2005 04:02 AM

i am doing nothing on the truck this weekend, but next weekend i intend to replace the upper and lower ball joints as well as the control arm shafts. if the weather is decent. (no garage)


All times are GMT -4. The time now is 12:10 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com