The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Seat Mounting (https://67-72chevytrucks.com/vboard/showthread.php?t=145600)

jedejour 03-13-2005 02:55 PM

Seat Mounting
 
I just got a good deal for a bench seat out of a 93 GMC... My question is since the mounting holes aren't an exact match, how did you guys do your conversion? My thought was to drill out some new holes, and weld a nut or tap a 1/4" 2x4 or 4x4 flat plate and then tack that to the under side of the body after the seat is in it's final position. Sinde I'm just in the mock up stage any advice would be appreciated. And pictures would also be helpful.


All times are GMT -4. The time now is 06:40 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com