The 1947 - Present Chevrolet & GMC Truck Message Board Network - how do I change the door lock cylinder?

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - how do I change the door lock cylinder? (https://67-72chevytrucks.com/vboard/showthread.php?t=148283)

Low87

03-28-2005 04:33 PM

how do I change the door lock cylinder?

I need to change the door locks on my truck. Anyone know the best way to do this? Planning on taking the panels off and figuring it out, but if anyone has done it I'd appreciate a heads up.

Jonboy

03-28-2005 05:19 PM

After removing the door panel, you should be able to see the retaining clip for the lock cylinder. Once that is removed, you should be able to wiggle the lock cylinder out of it's hole. Installation is reverse of removal

low 84

03-28-2005 05:48 PM

take the door panel off, and look at how its attached, its a no-brainer from there

Low87

03-28-2005 06:42 PM

Quote:

Originally Posted by low 84

its a no-brainer from there

You're assuming quite a bit of me...

Low87

03-28-2005 08:50 PM

It was very easy! Took about 30 minutes for both doors.

All times are GMT -4. The time now is 04:28 PM.