Complete Tpi System
 

I have a complete TPI unti off a 350 sbc on ebay.

http://cgi.ebay.com/ebaymotors/ws/eBayI … 7979838994

Good luck

http://cgi.ebay.com/ebaymotors/ws/eB...tem=7979838994

your link didn't work for me, you may want to add what year it is from as there were some minor changes through the TPI years ie: mass air/SD set ups.

What, no pics?

is that the setup w/the cone type filter sticking out the front of the throttle body

you are correct i have a pic in anyones interested

Pics always help a ton with selling stuff -- If you need help posting a pic here, email it to me and I will post it for you (Zieglerdigital(at)hotmail.com)

Anymore information? Year and mass air or speed density would be great.
hilljob26, you are refering to the speed density system. You can run an air filter right off the throttle body, on the mass air you have the mass air flow sensor between the filter and the throttle body.

this is a mas air system (which is much more forgiving one a upgraded motor).

comes with everything you need and will accept early heads or centerbolt heads.

real nice setup it for you rloking to upgrade your truck to a reliable efi system

heres a pic

Wow, that looks really nice. Do you have any other pictures?

Does it include the wiring harness, dizzy, and pcm? What about the sensors? Maybe I should look at the ebay auction too!!

As far as wire harness PCM and sensors go, I would get a megasquirt stand alone and run it that way. The wire harness would be much easier, and you can program it yourself. That is what I planned on doing to my TPI for my 327. The MS system is like $300 or so. That is a nice looking TPI, I assume oyu cleaned and inspected everything.

Nice unit.... I'm guessing that shipping is Free???

Im surprised no ones bought it yet :confused:

Looks to be a pre-89 unit since it appears to have the cold-start injector runner.

good deal, i had a complete setup, wiring cpu and all. it sold last year for $750 on ebay. i got the bid going a bit for ya.

so it will bolt right up to the older 350's,pre 84,mine is out of a 73,it will work...huh...i might have to do something about this

I Agree With The Others You Would Get More Money For It On Ebay If You Posted A Picture In Your Ebay Ad.

usually the only mod needed is to elongate the mid intake holes a bit so they line up and thread into the heads on older style engines. other than that it should bolt right up and go all the way back to the old 50's small blocks.