WTB More '72 upper engine parts needed.
 

I can use the following for my '72 4x4 w/350:
Dipstick and tube (I believe it curves to the front of the truck)
Correct intake manifold with coil bracket bolts and lifting eyes.
4x4 exhaust manifold heat shield.
Any help locating these would be appreciated!
Todd

What is the correct manifold you need? I have a stock iron one but not sure if it's what you are after... Are you after a certain casting number?

I'm not sure of the casting number. I need the stock iron one for a Quadrajet. Non EGR. I will do a little research and find the correct casting numbers.
Thanks
Todd

Sorry I dont have an extra but here are pics of the stock intake I took off my 72 K10 with a 350......second pic is the casting #.....Paul

And here's the one I have. I bet shipping will cost more than the price I'm asking for this. :) It's freshly bead blasted and ready for paint though.

Yep, I'm pretty certain the casting number I need is 6263751 as depicted in knsmodel's pictures. I believe the latter one is for a later model.
Thanks
Todd

ttt

intake
 

I have the stock one you need. $40 ptr have the bolts and the lifting eyes. has the correct casting # too.

Do you have a oem coil mounting bracket to include with it? I would also prefer the studded bolts for the lifting eyes. At least I believe that is how they came from the factory. Please quote shipping to 75227.
Thanks

Lifting hooks do not have special bolts....they bolt on like a washer under the regular bolt head....Paul