![]() |
Followup wheel question
Followup to this thread: http://67-72chevytrucks.com/vboard/s....php3?t=175306
Will this rim work on a 71 C20 Fleet? http://store.summitracing.com/defaul...=egnsearch.asp Rim Diameter (in): 17 Rim Width (in): 8.00 Backspacing (in): 4.50 Beadlock Functional: No Beadlock Included: No Rim Material: Steel Center Material: Steel Wheel Finish: Chrome Lug Nut Seat Style: Conical seat Wheel Construction: 2-piece Conical Seat Taper: 60 degree Hub Centric: No Center Bore Diameter (in): 5.15 Center Cap Included: No Offset (mm): 0 Obviously I don't want to order rims mail order without being sure...... |
Hmm...the link was bad. Try this one:
http://store.summitracing.com/partde...=KeywordSearch Yup, that one works... Anyone? |
Am I on my own with this one? I guess I can pull my existing wheels off and measure for myself........ :( :whine:
|
yep, they should fit. i know our trucks(with 8 lugs :metal: ) have an 8x6.5 bolt pattern, but i ain't sure about the backspacing. you'll have to check that one yourself.
|
Ill bet if you asked about a 5 or 6 lug wheel, youd have an answer quicker than..... quick!
Sorry I couldnt help out on this one... |
Yeah, I figure backspacing at 4.5 inches should be good. I was wondering about the center hole of the rim at 5.15 inches.....is that big enough to fit the 3/4 ton axles?
|
All times are GMT -4. The time now is 07:47 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com