The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Engine & Drivetrain (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=24)
-   -   Oil pan replacement (https://67-72chevytrucks.com/vboard/showthread.php?t=177551)

76bonanza 10-21-2005 12:20 PM

Oil pan replacement
 
My next project is oil pan replacment. Just want a stock replacement, but a good one, this is what I am looking at getting.

Pan
http://store.summitracing.com/defaul...-30700&FROM=MG

Gasket
http://store.summitracing.com/defaul...-41000&FROM=MG

bolts
http://store.summitracing.com/defaul...-38550&FROM=MG

What do you guys think of this set.
I have a new high volume oil pump all ready in it.
Pan I have now leaks and looks like it has been beaten with ball bat.

junkyardjohn 10-21-2005 12:58 PM

Re: Oil pan replacement
 
:o MAKE SURE THEY SEND YOU ONE THAT IS INTENDED FOR YOUR APPLICATION. I BOUGHT ONE AT A SWAP MEET & IT WOULD NOT FIT IN MY 71 K5 BLAZER, WITHOUT PUTTING 3/8" SHIMS IN BETWEEN THE MOTOR MOUNTS & THE BLOCK. I ALWAYS THOUGHT THERE WASN'T ANY DIFFERENCE IN THE MOTOR SHEETMETAL BETWEEN CARS & TRUCKS. I WAS WRONG. MAYBE IT'S JUST 4WD.S?? JOHN

76bonanza 10-21-2005 01:05 PM

Re: Oil pan replacement
 
Not sure if there is an difference they list it for like 67-79 pickups both 4x4 and 2x4

Joe67 10-21-2005 01:40 PM

Re: Oil pan replacement
 
I ordered a chrome rear end cover for my truck from Summit. I called them on the phone, verified the application and part number.

They still sent me the rear end cover for a passenger car 12 bolt :crazy:

76bonanza 10-21-2005 03:23 PM

Re: Oil pan replacement
 
Can anyone comment on this pan and gasket are they good or not?


All times are GMT -4. The time now is 06:39 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com