Can you identify this?
 

http://pic5.picturetrail.com/VOL83/5...66/8792572.jpg
http://pic5.picturetrail.com/VOL83/5...66/8792565.jpg

These are pics of a 12 bolt chevy carrier (left) and an unknown carrier on the right.
I am trying to figure out what this is.

See the "Got it from behind on Ebay" thread that goes along with this.

Any help would be GREAT thanks.


------------------
1969 C-10 292 I-6 4 spd in the middle of a restoration. going to get a 327 and 3.07 gears but keeping all of the original parts so I can put it back to original later on down the road.
55 chevy 4 door 150
47 Willys CJ-2A


[This message has been edited by texnician01 (edited April 12, 2002).]

[This message has been edited by texnician01 (edited April 12, 2002).]

[This message has been edited by texnician01 (edited April 12, 2002).]

look at the size of them spider gears,is the pin oversize like the gears?looking at the size difference you would think its 3/4 ton or something. good luck finding out.

------------------
project 70 chev swb rebuilt 396bb{402}rebuilt th-400 3.73 limited slip

Provide more info. What is the total height from outside bearing to outside bearing? How many ring gear bolts? what is the diameter of the bolt pattern for the ring gear bolts? Does it have any manufacturers stampings? etc. I'd guess either a Dana 60 or semi-floater 14 bolt.

------------------
70 GMC 3/4 ton Sierra Grande 402/TH400
72 Jimmy 4WD 4spd 4" & 35's
64 Corvette Coupe
68 Camaro 'vert TPI & TH700
69 Z/28 355 12.6's @110
72 Datsun 240Z-ol' reliable

I don't have exact specs cause I'm posting the pic for another guy. he thought that this was a 3.07 carrier and wanted a 3.73. I have a 3.73 and want a 3.07 so we were going to swap but It didn't work out cause this wasn't what he thoutht it was. I'll try to see what I can find out.

Thanks

------------------
1969 C-10 292 I-6 4 spd in the middle of a restoration. going to get a 327 and 3.07 gears but keeping all of the original parts so I can put it back to original later on down the road.
55 chevy 4 door 150
47 Willys CJ-2A

I measured this diff housing here is what i come up with, from outside edge of brg housing to outside edge is 7,7/8 Ring gear flange dia is 7,1/2 Ring gear bolt pattern from ctr to ctr is 1,3/4 and it has a 12 bolt pattern for the ring gear Thanks

From the picture it looks like a 12 bolt passenger car carrier. The car carriers are taller than the truck carriers.

Jim

ttt

if its 12 bolt posi car carrier you made out like a BANDIT