The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   67/68 grille trim - driver quality?? (https://67-72chevytrucks.com/vboard/showthread.php?t=188573)

71swb4x4 02-06-2006 11:46 PM

67/68 grille trim - driver quality??
 
3 Attachment(s)
I have these three pieces of trim.
The one on the top is the best. It has a dent that can be seen in the second picture. It's the one at the top of the second picture. It also has a couple of smaller dents, and some paint overspray.
The middle one is the worst. It has a bad dent that can be seen in the second picture. It is also dented a bit in the middle of it.
The bottom piece is pretty decent. It has a dent in the middle, and another decent dent too. The dents can kind of be seen in the bottom picture. There are a couple more minor dents too.
My plan was to try to pound the dents out of the top and bottom piece, but I just found a pair of NOS pieces, so these will go.
Price is $55 shipped to most US addresses.
Please respond in the thread.

71swb4x4 02-07-2006 09:51 PM

Re: 67/68 grille trim - driver quality??
 
another try at $45 shipped
I will keep them for extras if they don't go at $45.

71swb4x4 07-31-2006 07:44 PM

Re: 67/68 grille trim - driver quality??
 
I don't want these anymore.
$32.50 shipped?


All times are GMT -4. The time now is 08:17 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com