The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Washer spray nozzle replacement? (https://67-72chevytrucks.com/vboard/showthread.php?t=189638)

Fred T 02-16-2006 11:32 PM
Washer spray nozzle replacement?
 
What is anyone using for replacements on the windshield washer spray nozzles? Mine are full of rust and paint, so I doubt if they will spray right.

jhow66 02-17-2006 01:54 AM
Re: Washer spray nozzle replacement?
 
Buy new ones from the vendors.

Andy4639 02-17-2006 09:33 AM
Re: Washer spray nozzle replacement?
 
Here is a idea for you. I went this route and it all runs off the factory wiper control in the truck. I added sprayers from a small import on the wiper arm and the water jug. It has the electric pump built into it. This works great because it sprayes the whole windsheild while the arm is moving.

http://216.77.188.54/coDataImages/p/...wiperspray.JPG
http://216.77.188.54/coDataImages/p/...5/wiperjog.JPG

Fred T 02-17-2006 11:50 PM
Re: Washer spray nozzle replacement?
 
Quote:
Originally Posted by jhow66
Buy new ones from the vendors.
So far I haven't found them for sale by any of the vendors. Do you know who has them?

cstanley 02-18-2006 12:48 AM
Re: Washer spray nozzle replacement?
 
Quote:
Originally Posted by Andy4639
Here is a idea for you. I went this route and it all runs off the factory wiper control in the truck. I added sprayers from a small import on the wiper arm and the water jug. It has the electric pump built into it. This works great because it sprayes the whole windsheild while the arm is moving.

http://216.77.188.54/coDataImages/p/...wiperspray.JPG
http://216.77.188.54/coDataImages/p/...5/wiperjog.JPG
andy,
do you remember what import that washer bottle came out of? i've been looking for one myself, but most are not as compact as that.

72MARIO 02-18-2006 01:34 AM
Re: Washer spray nozzle replacement?
 
87 up trucks have the pump built in to th tank. 95 grand prix have the nice squriter like the one in the pics.

Andy4639 02-18-2006 10:17 AM
Re: Washer spray nozzle replacement?
 
If I remember correct it was a old corala, I think. Sorry but it's been some time ago when I did it.Just so some of you know. Once I got the sprayer's home I boiled a pot of water on my Kerosene heater and fit tested the sprayer on my arm and then used a pair of vise grips to hold it in place and set in the water to make the sprayer conform to the arm so it wouldn't fall off.

jc1969c10 09-19-2007 03:49 PM
Re: Washer spray nozzle replacement?
 
I know this is an old post, but it is as close to what I need as I could get.

I need to find out where/how the factory spray nozzles were mounted on the cowl. I like what csstanley has done, but prefer staying stock if I can. I have the nozzles but can't seem to figure out how to install them.

If someone has a picture that would be great too.

Any help would be appreciated.

72armyswbtruck 09-19-2007 05:01 PM
Re: Washer spray nozzle replacement?
 
Use this link and there are some pics of the washer nozzles and how they are mounted. they are mounted with screws
http://67-72chevytrucks.com/vboard/s...d.php?t=194094

jc1969c10 09-19-2007 10:04 PM
Re: Washer spray nozzle replacement?
 
Thanks 72armyswbtruck. This is what I needed.


All times are GMT -4. The time now is 08:27 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com