Help with wood bed
 

hello I just have my truck ready to lay the new wood in and I am confused on how to put it back together, Mainly how the cross sills go into place, If you could help me I would be very thankful

Re: Help with wood bed
 

Welcome to the board, you will find the best info ever here on this board.

Try this link:

http://www.mar-k.com/67-72conv.pdf

Re: Help with wood bed
 

Yea, welcome to the board from someone just south of you. As for that link, that's awesome, I saved it. Thanks Green Machine.

Re: Help with wood bed
 

Thanks for the help, Iv been there alreadys, Just I dont no where my one small cross sill is placed on my long bed.

Re: Help with wood bed
 

Sorry that I don't have a pic, but I will give you a TTT that way maybe someone else can help you out, and BTW :hi2:

Re: Help with wood bed
 

The 1 thinner cross sill is the 3rd forward from the tailgate bolted to the front of the wheel well....as for the wood, start from the outsides and work your way into the middle.

Re: Help with wood bed
 

Ok, just went and looked at mine - LWB Fleetside. Starting front the front:

large long
large long
large long
small long - front of wheel tub
none - just strip bolts with washers underneath
small short
large long
large long
Rear Sill

The small short did not come in my kit, if you do not have one you need to get one, it will be way to soft between the wheels there if you don't since there is nothing in front of it either.

Hope that helps.

Re: Help with wood bed
 

Thanks alots for the help guys =)