Pics of new seats and interior, custom
 

My latest project/upgrade on my 72 GMC. Seats are from a 02 Chevy Tahoe, heated leather full power. I built and covered the console. I am also planning on changing the dash pad, door panels, armrests, and sunvisors to a Light Saddle or Parchment color.

Re: Pics of new seats and interior, custom
 

2 comments, and a question;

Looks good.
a roll of black (or gray) carpet can be had at wally world or a less evil monol\polizing store for 10 bucks or so, can be used to cover the fuel tank.


Now th question... Did you make extentions for the heater vent, or are you letting the vent heat up the stereo?

Re: Pics of new seats and interior, custom
 

Very sharp! I like it.

Re: Pics of new seats and interior, custom
 

Looks damn comfy!!

Re: Pics of new seats and interior, custom
 

Actually, I purchased 3 yards of matching vinyl that I used to cover the console, and I also covered the center between the seats with some of the vinyl, for now. I will probably buy the carpeted gas tank cover later. I didn't make a block off plate yet for the heater because I don't use the heater. I only drive the truck in the summer. I might put a block off plate in there as I see how much heat is generated in there. Thanks for the comments.

Re: Pics of new seats and interior, custom
 

Wow nice job! Did you make the center conusol yourself? If so it really turned out great looking. Keep up the great work.:)

Tom

Re: Pics of new seats and interior, custom
 

very nice. seats look to bulky to me but im betting they are comfy. i liked my 96 Z71 seats. wouldnt mind finding a set of those to put in. and if you built the whole console thats some real nice work.

Re: Pics of new seats and interior, custom
 

looks killer to me! just curious if we can see pictures of the support bracketry you're using under the cab to hold those in properly?

Re: Pics of new seats and interior, custom
 

looks good. nice work:metal:

Re: Pics of new seats and interior, custom
 

Love that console!

Re: Pics of new seats and interior, custom
 

Yep, I built the console myself. I am using a 4" long piece of 1/4" thick steel flat stock under each mounting point in the seat. And 3/8" bolts. The mounting feet of the seat is about 4" long. Thanks!!