The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Upper Moldings (https://67-72chevytrucks.com/vboard/showthread.php?t=201598)

480gmc

06-05-2006 11:02 AM

Upper Moldings

I have a 72' GMC that I'm replacing all the upper moldings on. I have the door ones off but I'm having some trouble with the others. Can I remove them without taking the fenders, etc. off? Is there a trick to getting the clips to release? All of the adhesive clips are detached, it's just the metal ones on the ends I can't get off. Thanks in advance..

soonrfish

06-05-2006 05:16 PM

Re: Upper Moldings

bump, im curious as well.

72-stomper

06-06-2006 12:13 AM

Re: Upper Moldings

If you are talking about the upper body side trim, FENDER= You can do it by removeing the inner fenders and taking all the nuts off (about 6 per fender) DOOR=Take off 2 nuts (1 on each end) and slice the adheaseve tape with a razor blade.(about 4 places) BOX= same as door, 1 nut on each end, adhaseive in the middle.
Hope this helps.:b69:

special-K

06-06-2006 08:45 AM

Re: Upper Moldings

Huh?Adhesive tape?What about the clips?

All times are GMT -4. The time now is 03:20 PM.