The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   white soft cover (https://67-72chevytrucks.com/vboard/showthread.php?t=202693)

76bonanza 06-15-2006 01:41 PM

white soft cover
 
Looking at getting a soft bed cover from tekstyle. Was going to get black but noticed they have it in white also. Wondering if anyone has a pic of a truck with white soft cover. My truck is two tone blue and white.

Tim240Z 06-15-2006 03:44 PM

Re: white soft cover
 
Boy, it's tough to keep the black one clean.....the white one might be a nightmare!

76bonanza 06-15-2006 05:17 PM

Re: white soft cover
 
I wondered about that also but a white car is much easier to clean than a black one. Anyone got any pics of blue and white two tone with black soft cover?

special-K 06-15-2006 09:18 PM

Re: white soft cover
 
All colors are equal when it comes to cleaning.Black "shows" dirt more.I have a picture of my ochre/white`71 at night:
http://i20.photobucket.com/albums/b2...s55/scan-1.jpg

76bonanza 06-15-2006 09:29 PM

Re: white soft cover
 
2 Attachment(s)
did you like the white special-k or would you rather have had black? here is a pic of my truck. can not decide.

matthufham 06-15-2006 10:17 PM

Re: white soft cover
 
you should go with white or that blue, but since blue isn't an option, the white would work. white would be my choice because it would match the roof

special-K 06-16-2006 07:46 AM

Re: white soft cover
 
I liked the white alot.It was installed in`89 to protect the wood floor when the camper was removed.No other color would do on this truck.I still have the cover,I parted the truck two summers ago.I`m going to have it shortened and use it on my low budget short bed.Jim Carter offers colors in a frame-type tonneau.Or,you can get one made by an upholstery shop any way you want.That`s what I do.I`m not afraid to drill 1/16" holes in a bed,like most guys are.If I ever want to fill them,it`s easy.That`s how these truck were done for decades.I think Jim`s site is www.oldchevytrucks.com


All times are GMT -4. The time now is 06:38 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com