The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - 3 spd bellhousing dimensions (https://67-72chevytrucks.com/vboard/showthread.php?t=209349)

71/454

08-26-2006 04:08 PM

3 spd bellhousing dimensions

Does anyone have a 3 speed bellhousing loose that they can measure. Or does anyone know what size the hole is on the trans side and what size clutch that bellhousing will accept off by heart?

fastwillie 696969

08-26-2006 04:09 PM

Re: 3 spd bellhousing dimensions

i got a 11 inch clutch in my i think 10 1/2 and11 works

gmc67swb

08-26-2006 05:02 PM

Re: 3 spd bellhousing dimensions

Not sure of the dimensions but I 2nd the 11" clutch. We have a CenterForce dual fricition in ours.

crazy longhorn

08-26-2006 10:10 PM

Re: 3 spd bellhousing dimensions

67 & older....4 11/16 hole in the bell. 68 up gets a 5 1/8" hole to pilot the trans.....3spd or 4spd doent matter. :crazy: L

All times are GMT -4. The time now is 11:48 AM.