The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1969 - 1972 Blazers and Jimmys Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=36)
-   -   Request: Pictures of Blazer/Jimmy doors for comparison on where to cut (https://67-72chevytrucks.com/vboard/showthread.php?t=224489)

Captkaos 01-23-2007 07:30 PM

Request: Pictures of Blazer/Jimmy doors for comparison on where to cut
 
Anyone care to post some close-up pics of Jimmy/Blazer doors so I can see where pickup doors will need to be cut? I would like to see from the window opening up, the whole vent wing, and the rear of the door, and a detail of both areas preferable from the side.

jaros44sr 01-23-2007 08:43 PM

Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut
 
Quote:

Originally Posted by Captkaos (Post 1999839)
Anyone care to post some close-up pics of Jimmy/Blazer doors so I can see where pickup doors will need to be cut? I would like to see from the window opening up, the whole vent wing, and the rear of the door, and a detail of both areas preferable from the side.

If no one posts up I can do it for you tomorrow night, I have original doors and aftermarket repops. J

krue 01-23-2007 09:27 PM

Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut
 
I believe the assembly manual has drawings w/measurements.

LUV2XCLR8 01-23-2007 09:53 PM

Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut
 
:agree:

bouncytruck 01-23-2007 10:23 PM

Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut
 
Yup. Order a factory assembly manual and get the dimensions direct from GM.

Captkaos 01-23-2007 11:03 PM

Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut
 
well, this is for putting the new one piece glass in a door, and I just need to verify where to cut it. I can get if off a buddies Blazer Sunday, just figured someone may have it...

JimKshortstep4x4 01-24-2007 11:13 AM

Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut
 
1 Attachment(s)
Here is a picture of the instructions from the Assembly Manual. I could not find anything on the rear cut but it is pretty straight forward. The rear cut is parallel to the door and is cut 1/8" above the door, (probably for saw blade clearance).

Jim

Captkaos 01-24-2007 11:23 AM

Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut
 
Is there anyway I could get you to take those individual views and email them to me at webmaster@73-87chevytrucks.com ?
MUCH appreciated!

65-72 chevytoys 01-24-2007 01:16 PM

Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut
 
If you can wait until tomorrow, I have it at home bring it to work with tomorrow scan it to PDF and email.

Captkaos 01-24-2007 01:25 PM

Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut
 
I can wait. Just trying to get a door cut down to test the new 67-72 kits in for the "Blazer" kit.

bouncytruck 01-24-2007 01:53 PM

Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut
 
Am I understanding that you are developing a one piece door glass kit for the Blazer? That would be cool if you can get it to work...

Captkaos 01-24-2007 03:41 PM

Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut
 
Quote:

Originally Posted by bouncytruck (Post 2001013)
Am I understanding that you are developing a one piece door glass kit for the Blazer? That would be cool if you can get it to work...

That would be correct, I am gathering the info for OPP (company that is selling the 67-72 kit) He thinks it should be availble pending any major issues in March at the earliest.

krue 01-24-2007 05:09 PM

Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut
 
:metal:

wedgemon 01-24-2007 07:51 PM

Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut
 
I'd appreciate copies of the PDF scans as well.

- Dave

Pop's72 01-24-2007 07:52 PM

Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut
 
Since we are asking questions...

Would that be a one piece window kit with no triangle of any kind? :confused:

Captkaos 01-25-2007 04:59 PM

Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut
 
Quote:

Originally Posted by Pop's72 (Post 2001418)
Since we are asking questions...

Would that be a one piece window kit with no triangle of any kind? :confused:

Yes, it would be this one we are discussing here:
http://67-72chevytrucks.com/vboard/s...d.php?t=223482

65-72 chevytoys 01-25-2007 06:03 PM

Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut
 
1 Attachment(s)
Here is a pdf of the truck door cut locations for blazers

Captkaos 01-25-2007 06:12 PM

Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut
 
SWEET!!! Thanks. Now to cut one down...

Jvan 01-27-2007 02:55 PM

Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut
 
Would be interested in the one piece window when it happens. Would you post info when available?

Captkaos 01-27-2007 09:59 PM

Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut
 
I will defintiely post the info when the Blazer option is availible.

Captkaos 02-07-2007 05:12 PM

Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut
 
Ok, here is the info. I just talked to him today (thanks to 65-72 chevytoys for the PDF). The Blazer/Jimmy kit will be availible at the initial release at the end of this month. It will be an aditional option on top of the standard kit, should be about $60, stayed tuned for final pricing.

BTW, is the cap piece on top of the door availible? (plastic thing that is always broken?)

70gmcjimmy 02-07-2007 08:01 PM

Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut
 
Hey Chris,
I just ordered a set of those door caps from Mikes Bump and Grind Garage last weekend so I havent gotten them yet. Definitely the best price on them that I have seen at $35 for the pair.

Later---DAC

gringoloco 02-08-2007 12:07 AM

Re: Request: Pictures of Blazer/Jimmy doors for comparison on where to cut
 
Quote:

Originally Posted by Captkaos (Post 2021515)
The Blazer/Jimmy kit will be availible at the initial release at the end of this month.

SSSWEEEEEEEEEEEETTT!!!!!


All times are GMT -4. The time now is 06:40 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com