Is the only way to adjust your head lights with the 3 screws?
 

My dims are fine but the brights are not even close to the road they shoot way up...so i probably have to tilt them down eh?

Re: Is the only way to adjust your head lights with the 3 screws?
 

tilt them down ... but there are only 2 screws for adjusting ... up & down and side to side.

Re: Is the only way to adjust your head lights with the 3 screws?
 

you could lift the rear of the truck and lower the front that'd make the lights go down

Re: Is the only way to adjust your head lights with the 3 screws?
 

we have a lot of car dear accedents around here so it is not uncommon to see wooden shims used

Re: Is the only way to adjust your head lights with the 3 screws?
 

Are you talkin chevy, or GMC?
I don't see how the low can be just right, and the high is way off, when it's the same bulb. :confused:

Re: Is the only way to adjust your head lights with the 3 screws?
 

me neither its really weird

Re: Is the only way to adjust your head lights with the 3 screws?
 

I think your lows are too high,too.They`re supposed to point down.Besides adjusting screws there`s the jack it up in rear/drop it in the front(as suggested)or run it into something.That usually works:cool:.