The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   Pwr Steering Pump&Brackets, Some AC Brackets, Matching Pulley's etc. '71 (https://67-72chevytrucks.com/vboard/showthread.php?t=239959)

arkracing 05-07-2007 01:45 PM

Pwr Steering Pump&Brackets, Some AC Brackets, Matching Pulley's etc. '71
 
All this stuff came off of a SWP V8 '71 4x4 Truck:

I have the Power Steering Pump and Brackets off a '71 - no lines. The pulley doesn't have any bends in it. NOTE: the pump does have play in the shaft - It was on a running truck and worked fine, but I would suggest a rebuild - The brackets are worth more than the pump, so I can take them off the pump for shipping etc. The pump shaft is tight in vertical movement but slides in and out about 1/8". Yeh I know you sickos - I can't figure out how to explain it any more "politically correct"

I have SOME A/C brackets - see the pictures. I know that there are 3 more brackets to complete the set. But hey what do you want? 4 out of 7 wins the series

I have the Alt adjustment bracket - I can't remember how the lower part of the alt. mounts :lol: but I don't see the bracket.

I have the 3 matching pulleys - the main Double Crank Pulley, the "Add-On" crank Pulley for Power Steering/AC and the Water Pump Pulley.

I would like to sell everything together @ this point.

I'll start @ $100 + shipping - if you don't like it, make a REASONABLE offer. Oh and this stuff isn't that light - the add on pulley is weighted and the pump is pretty heavy as well.
I see used powersteering pumps go for $50-$60 with the gamble that the pump is still good go for around $50 here on the board:confused: I'm telling you that this pump has play:o

I also have a set of SBC Frame Mounts: $20 + Shipping
and a set of 250 6cly Frame Mounts: $15 + Shipping


http://www.arkracingonline.com/photo...1316928263.jpg
http://www.arkracingonline.com/photo...1274791608.jpg
http://www.arkracingonline.com/photo...1130444327.jpg
http://www.arkracingonline.com/photo...1169991383.jpg

HuggerCST 05-07-2007 01:58 PM

Re: Pwr Steering Pump&Brackets, Some AC Brackets, Matching Pulley's etc. '71
 
I'm interested in the bottom 2 A/C brackets pictured should you decide to split it up.

jorgensensc 05-07-2007 02:57 PM

Re: Pwr Steering Pump&Brackets, Some AC Brackets, Matching Pulley's etc. '71
 
If this is for a SWP I would be interested in the pulleys, minus the power steering pulley shipped to 77018, If you don't mind.
Shawn

arkracing 05-07-2007 04:01 PM

Re: Pwr Steering Pump&Brackets, Some AC Brackets, Matching Pulley's etc. '71
 
Quote:

Originally Posted by jorgensensc (Post 2162967)
If this is for a SWP I would be interested in the pulleys, minus the power steering pulley shipped to 77018, If you don't mind.
Shawn

Everything is for a SHORT Pump ^ :rolleyes: . As I said above I would like to sell everthing together as it is easier than sending 1 bracket to someone that a pulley to someone else etc.

jorgensensc 05-07-2007 04:46 PM

Re: Pwr Steering Pump&Brackets, Some AC Brackets, Matching Pulley's etc. '71
 
I was only asking if you split them up. I figured Huggercst wanted the A.C. brackets, I wanted the pulley, then all you have left is the power steering pump with brackets and pulley, and the Alternator brackets. Just trying to get the pulleys I need (mine are mismatched right now)
Shawn

arkracing 05-07-2007 06:25 PM

Re: Pwr Steering Pump&Brackets, Some AC Brackets, Matching Pulley's etc. '71
 
If I can get enough people to split everything up without have leftover then yeh I'll do it.

Sorry guys, don't mean to have an attitude - it's been a rough day :)

CorVM 05-07-2007 06:51 PM

Re: Pwr Steering Pump&Brackets, Some AC Brackets, Matching Pulley's etc. '71
 
If you end up splitting everything up, I wouldn't mind having the alt bracket.

billsbowtie 05-07-2007 09:50 PM

Re: Pwr Steering Pump&Brackets, Some AC Brackets, Matching Pulley's etc. '71
 
i only saw 3 a/c brackets in the pic.s . i would like to make you and offer for the parts in the pic.s of $90.00 shipped to 24281. and i would like a pic. of the sb eng. mounts. thanks

arkracing 05-08-2007 08:21 AM

Re: Pwr Steering Pump&Brackets, Some AC Brackets, Matching Pulley's etc. '71
 
Quote:

Originally Posted by billsbowtie (Post 2163503)
i only saw 3 a/c brackets in the pic.s . i would like to make you and offer for the parts in the pic.s of $90.00 shipped to 24281. and i would like a pic. of the sb eng. mounts. thanks

SBC Engine mounts - last picture on the right - the are black, very clean looking, no rust/pitting.

billsbowtie 05-08-2007 11:55 AM

Re: Pwr Steering Pump&Brackets, Some AC Brackets, Matching Pulley's etc. '71
 
pm sent

arkracing 05-08-2007 01:04 PM

Re: Pwr Steering Pump&Brackets, Some AC Brackets, Matching Pulley's etc. '71
 
OK - looks like everything )except for the 6cly motor mount stands) is SOLD to billsbowtie.

HuggerCST 05-08-2007 01:28 PM

Re: Pwr Steering Pump&Brackets, Some AC Brackets, Matching Pulley's etc. '71
 
Bill- Keep me in mind if you decide to sell those A/C brackets.

billsbowtie 05-08-2007 09:08 PM

Re: Pwr Steering Pump&Brackets, Some AC Brackets, Matching Pulley's etc. '71
 
wynne i needed the big one on the bottom and maybe the one to the left to make me a set.i will check to make sure. do you need the top right one?

HuggerCST 05-08-2007 11:07 PM

Re: Pwr Steering Pump&Brackets, Some AC Brackets, Matching Pulley's etc. '71
 
No problem Bill, I was just trying to complete a set myself, but I'm in no hurry, I'll find them eventually. I don't need the one on the top right. Thanks.


All times are GMT -4. The time now is 07:33 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com